Opens in a new tab

REF3012AIDBZR

1.25V Series VRef, 0.2% Acc, 50ppm/C, 42uA, SOT-23-3

8234

Effective Inventory

Image for reference only

Manufacturer Part:

REF3012AIDBZR

Package:

SOT-23-3 (2.92 x 1.30 x 1.00 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The REF3012AIDBZR from Texas Instruments is a 1.25V precision CMOS series voltage reference with 0.2% initial accuracy, 50ppm/C max drift, 42uA Iq, and SOT-23-3 package.

Key Specifications

Type Precision CMOS Series Voltage Reference
Output Voltage 1.25V (fixed)
Initial Accuracy 0.2% (max)
Temperature Drift 50 ppm/C max (0 to 70C); 75 ppm/C max (-40 to 125C)
Input Voltage Range 1.8V to 5.5V
Quiescent Current 42 uA (typical); 50 uA (max)
Output Current 25 mA (max)
Dropout Voltage 1 mV (typical at zero load)
Output Noise (0.1-10Hz) 14 uVpp (typical)
Output Noise (10Hz-10kHz) 42 uVrms (typical)
Package SOT-23-3 (DBZ)
Operating Temperature -40C to +125C

Features

  • 1.25V fixed output with 0.2% initial accuracy
  • 50 ppm/C max temperature drift (0 to 70C)
  • 1mV typical dropout voltage
  • 42uA typical quiescent current
  • 25mA output current capability
  • No output capacitor required for stability
  • Tiny 3-pin SOT-23 package

Applications

  • Data acquisition ADC/DAC reference
  • Loop-powered industrial transmitters
  • Battery-powered portable instruments
  • Medical monitoring equipment
Product Introduction: REF3012AIDBZR Product Introduction

The REF3012AIDBZR from Texas Instruments is a 1.25V precision CMOS series voltage reference in a tiny 3-pin SOT-23 package. The A grade provides 0.2% initial voltage accuracy at 25C, and the I suffix indicates the industrial temperature range of -40C to +125C. The DBZ suffix denotes the SOT-23-3 package, and R indicates tape and reel packaging. The REF3012 is part of the REF30xx family that uses a CMOS bandgap architecture optimized for low power consumption (42uA typical quiescent current) and low dropout voltage (1mV typical at zero load). The 1mV dropout allows the reference to operate with the input voltage only 1mV above the 1.25V output, making it ideal for battery-powered applications where supply headroom is limited. The device does not require an output capacitor for stability, simplifying PCB layout and reducing component count in intrinsically safe and explosion-proof applications. The 25mA output current capability is sufficient to drive most ADC and DAC reference inputs. The 14uVpp low-frequency noise (0.1 to 10Hz) ensures stable conversion results in precision measurement systems.

Working Principle: REF3012AIDBZR Working Principle

The REF3012AIDBZR uses a CMOS bandgap voltage reference architecture. The core bandgap circuit generates a stable voltage by combining a proportional-to-absolute-temperature (PTAT) voltage with a complementary-to-absolute-temperature (CTAT) voltage from a forward-biased PN junction. When properly trimmed, the PTAT and CTAT temperature coefficients cancel, producing a nearly temperature-independent reference voltage. The REF30xx family implements this in a CMOS process, allowing the very low 42uA quiescent current compared to bipolar references that typically draw hundreds of microamps. The series reference topology includes an internal error amplifier and pass transistor that regulate the output voltage. The 1mV dropout voltage is achieved by using a low-threshold CMOS pass element that requires minimal headroom between input and output. The output stage is designed to be unconditionally stable without an external capacitor, achieved by ensuring the output impedance and error amplifier bandwidth create a single dominant pole within the feedback loop. Laser trimming of internal resistors sets the 1.25V output to 0.2% accuracy at the factory. The 50ppm/C temperature drift specification results from second-order curvature correction in the bandgap circuit.

Pin Description: REF3012AIDBZR Pin Definition and Functions
Pin Name Type Function
1 OUT Output Reference voltage output (1.25V)
2 GND Power Ground
3 IN Power Input supply voltage (1.8-5.5V)
Application Scenarios: In which products and applications is REF3012AIDBZR used
  • 3.3V system ADC reference for 12-bit data acquisition with 0.2% accuracy providing 0.5 LSB error at full scale
  • Loop-powered 4-20mA pressure transmitter with 42uA Iq minimizing total loop current budget
  • Battery-powered portable instrument with 1mV dropout allowing operation down to 1.251V input
Alternative Models: What chips are recommended as replacements for REF3012AIDBZR
Manufacturer Part Number Package Notes
TI REF3030AIDBZR SOT-23-3 3.0V output version
TI REF3012AIDBVT SOT-23-3 Cut tape version
TI REF35125AIDBZR SOT-23-3 Lower Iq (650nA), 6ppm/C drift
Maxim MAX6126A21+ SOT-23-6 1.25V, lower noise, 2ppm/C
ADI ADR3412ARJZ SOT-23-3 1.25V, 7ppm/C, compatible

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1