Opens in a new tab

Home » Integrated Circuits ICs, Sensors » SHT30-DIS-B2.5KS

SHT30-DIS-B2.5KS

Digital humidity+temp sensor, +/-2%RH, +/-0.3C, I2C, PTFE protected, DFN-8 (2.5×2.5mm)

8831

Effective Inventory

Image for reference only

Manufacturer Part:

SHT30-DIS-B2.5KS

Package:

DFN-8 (2.5 x 2.5 x 0.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SHT30-DIS-B2.5KS from Sensirion is a high-accuracy digital humidity and temperature sensor with +/-2% RH and +/-0.3 C accuracy. It features an I2C interface with dual address support, built-in heater, and PTFE membrane protection in a DFN-8 (2.5×2.5mm) package.

Key Specifications

Humidity Accuracy +/-2% RH (typical)
Temperature Accuracy +/-0.3 C (typical)
Humidity Range 0% to 100% RH
Temperature Range -40 to 125 C
Resolution Humidity: 0.01% RH, Temperature: 0.01 C
Supply Voltage 2.15V to 5.5V
Supply Current 800 uA (measuring), 0.6 uA (standby)
Interface I2C (0x44 or 0x45)
Package DFN-8 (2.5 x 2.5 x 0.9mm)

Features

  • Industry-leading +/-2% RH and +/-0.3C accuracy
  • PTFE membrane protects sensor from dust and water

Applications

  • Weather stations and environmental monitoring
  • HVAC and building automation
  • Industrial process control
  • Consumer appliances
  • Medical and healthcare devices
Product Introduction: SHT30-DIS-B2.5KS Product Introduction

The SHT30-DIS-B2.5KS from Sensirion is a high-precision digital humidity and temperature sensor built on CMOSens technology. It provides best-in-class accuracy of +/-2% RH and +/-0.3 C in a compact 2.5×2.5mm DFN-8 package with PTFE membrane protection. The I2C interface supports two address options (0x44 or 0x45) for multi-sensor bus configurations. An integrated heater can be activated for dew-point removal or self-test. The sensor is fully calibrated and provides a NIST-traceable digital output, eliminating the need for external signal conditioning.

Working Principle: SHT30-DIS-B2.5KS Working Principle

The SHT30-DIS-B2.5KS uses Sensirion’s CMOSens technology combining a capacitive humidity sensor and a bandgap temperature sensor on a single CMOS chip. **Humidity Sensing**: A polymeric capacitive sensing element absorbs or desorbs water molecules from the ambient air, changing its dielectric constant and thus its capacitance. The change in capacitance is proportional to relative humidity. **Temperature Sensing**: A precision bandgap temperature sensor provides accurate temperature measurement used both as a standalone output and for humidity compensation. **Signal Processing**: The analog signals from both sensors are digitized by internal ADCs and processed by the on-chip DSP. Factory calibration coefficients stored in on-chip OTP memory are applied to produce the final corrected humidity and temperature readings. **Communication**: The I2C interface supports standard mode (100kHz) and fast mode (400kHz). Measurement commands can trigger single-shot or periodic measurements with various repeatability settings (high/medium/low) trading accuracy for power consumption. **Heater**: An integrated resistive heater can evaporate condensation on the sensor surface, important in high-humidity or dew-point applications.

Pin Description: SHT30-DIS-B2.5KS Pin Definition and Functions
Pin Name Description
1 SCL I2C clock input
2 ADDR I2C address select (connect to VDD for 0x45, GND for 0x44)
3 ALERT Programmable alert output (active low)
4 SDA I2C data (bidirectional)
5 VDD Power supply (2.15V to 5.5V)
6 nRESET Reset input (active low, optional)
7 R Not connected (leave floating)
8 VSS Ground
Application Scenarios: In which products and applications is SHT30-DIS-B2.5KS used
  • Weather Stations: High-accuracy outdoor humidity and temperature monitoring for meteorological applications
  • HVAC Control: Precise RH measurement for building climate control and energy optimization
  • Industrial Process: Humidity monitoring in drying ovens, clean rooms, and semiconductor fabrication
  • Smart Appliances: Condensation detection and defrost control in refrigerators and dryers
  • Medical Devices: Breath humidity analysis and incubator environment monitoring
Alternative Models: What chips are recommended as replacements for SHT30-DIS-B2.5KS
Model Manufacturer Key Difference
SHT31-DIS-B2.5KS Sensirion +/-2%RH, +/-0.3C, same package, enhanced
SHT35-DIS-B2.5KS Sensirion +/-1.5%RH, +/-0.1C, premium accuracy
BME280 Bosch Humidity+Temp+Pressure, LGA-8
AHT20 ASAIR +/-2%RH, +/-0.3C, I2C, DFN-6
HDC2080DMBR TI +/-2%RH, +/-0.2C, I2C, WSON-6

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1