Opens in a new tab

Home » Integrated Circuits ICs » SI5351A-B-GT

SI5351A-B-GT

I2C clock generator, 3-output LVCMOS, 2.5kHz-200MHz, 0ppm error, 70ps jitter, 10-MSOP

4985

Effective Inventory

Image for reference only

Manufacturer Part:

SI5351A-B-GT

Package:

10-MSOP (3.0 x 3.0 x 0.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SI5351A-B-GT from Silicon Labs (Skyworks) is an I2C-programmable any-frequency CMOS clock generator producing up to 3 LVCMOS outputs from 2.5kHz to 200MHz. It features dual fractional-N PLLs, MultiSynth dividers, 0ppm frequency error, and 70ps jitter in a 10-MSOP package.

Key Specifications

Manufacturer Silicon Labs / Skyworks
Type Programmable Clock Generator
Number of Outputs 3 (LVCMOS)
Output Frequency Range 2.5kHz to 200MHz
Input Frequency 25MHz or 27MHz crystal
Number of PLLs 2 (fractional-N)
Jitter (Period) 70ps typ peak-to-peak
Supply Voltage 1.71V to 3.6V (core), 1.8-3.3V (output)
Supply Current 22mA typical
Interface I2C
Package 10-MSOP (3.0 x 3.0mm)
Operating Temperature -40C to +85C

Features

  • Generates any frequency from 2.5kHz to 200MHz on each output
  • 0ppm frequency error at each output
  • Dual fractional-N PLLs with MultiSynth dividers
  • I2C user-definable configuration
  • Low period jitter: <70ps typ
  • Operates from low-cost 25MHz or 27MHz crystal
  • Separate output voltage supply pins (1.8V, 2.5V, 3.3V)
  • Configurable spread spectrum
  • Programmable rise/fall time control

Applications

  • Replacing crystals, crystal oscillators, and PLLs
  • RF and radio transceiver clocking
  • FPGA and CPU clock generation
  • Consumer electronics and telecom
  • Amateur radio and SDR
Product Introduction: SI5351A-B-GT Product Introduction

The Silicon Labs SI5351A-B-GT is a versatile I2C-programmable clock generator ideally suited for replacing crystals, crystal oscillators, VCXOs, PLLs, and fanout buffers. Based on a PLL + high-resolution MultiSynth fractional divider architecture, the device can generate any frequency up to 200MHz on each of its three outputs with 0ppm error. A single low-cost 25MHz or 27MHz crystal serves as the reference. The dual fractional-N PLLs and MultiSynth dividers allow generation of non-integer-related clock frequencies, enabling one device to synthesize clocks for multiple domains. With 70ps typical period jitter and configurable rise/fall times, the SI5351A delivers clean, low-noise clock signals.

Working Principle: SI5351A-B-GT Working Principle

The SI5351A-B-GT operates through a two-stage synthesis architecture: 1) Input Stage: An external 25MHz or 27MHz crystal drives the internal oscillator. Internal load capacitors (0/6/8/10pF selectable) eliminate the need for external components. 2) First Synthesis Stage: Two fractional-N PLLs (PLLA and PLLB) multiply the crystal reference to a high-frequency intermediate clock (600-900MHz). The fractional-N architecture allows non-integer multiplication ratios for precise frequency generation. 3) Second Synthesis Stage: Each output has a dedicated MultiSynth fractional divider that divides the PLL output to the desired frequency. The high-resolution fractional dividers enable 0ppm frequency error. 4) Output Stage: Additional integer R dividers allow frequencies as low as 2.5kHz. Crosspoint switches route any PLL to any output, providing total flexibility. I2C registers configure all parameters.

Pin Description: SI5351A-B-GT Pin Definition and Functions
Pin Name Type Function
1 VDD Power Core supply (1.71V to 3.6V)
2 XA Input Crystal input
3 XB Input Crystal input
4 GND Ground Ground
5 SCL Input I2C clock
6 SDA I/O I2C data
7 CLK0 Output Clock output 0 (LVCMOS)
8 CLK1 Output Clock output 1 (LVCMOS)
9 CLK2 Output Clock output 2 (LVCMOS)
10 VDDO Power Output supply (1.8V, 2.5V, or 3.3V)
Application Scenarios: In which products and applications is SI5351A-B-GT used
  • RF transceiver local oscillator generation for amateur radio and SDR
  • FPGA multi-clock domain generation from single crystal
  • Replacing multiple crystal oscillators in consumer electronics
Alternative Models: What chips are recommended as replacements for SI5351A-B-GT
Manufacturer Part Number Package Notes
Skyworks SI5351A-B02075-GTR 10-MSOP Tape and reel version
Skyworks SI5351B-B-GM 20-QFN With internal VCXO
TI CDCE913PWR 14-TSSOP Programmable clock, 1 output
Renesas 5P49V5901B196NLGI 24-QFN Programmable clock generator

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1