Opens in a new tab

SI9243AEY-T1-E3

ISO 9141 bus transceiver, 6-36V VBAT, 200kBaud, reverse protection, SOIC-8

5678

Effective Inventory

Image for reference only

Manufacturer Part:

SI9243AEY-T1-E3

Package:

SOIC-8 (5 x 4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SI9243AEY-T1-E3 from Vishay Siliconix is an ISO 9141-compatible single-ended bus transceiver for automotive diagnostic communication. Operating from 6V to 36V battery supply with reverse battery protection and 200kBaud data rate, it provides robust bidirectional serial communication in SOIC-8 package.

Key Specifications

Supply Voltage (VBAT) 6V to 36V
Data Rate 200 kBaud (typical)
Reverse Battery Protection Down to -24V
Standby Current (IBAT) 1 μA @ VDD=0.5V
Quiescent Current (OFF) 120 μA (IBAT)
ESD Rating 2 kV
Protocol ISO 9141
Package SOIC-8
Operating Temperature -40°C to +125°C

Features

  • ISO 9141 compliant for automotive diagnostic bus communication
  • Wide 6V to 36V battery supply operation with reverse protection to -24V
  • Overtemperature shutdown function for K output protection
  • Short circuit protection to VBAT on K and L pins

Applications

  • Automotive OBD diagnostic interfaces
  • Vehicle ECU communication modules
  • ISO 9141/K-Line protocol adapters
  • Automotive service tool interfaces
  • Industrial single-wire bus communication
Product Introduction: SI9243AEY-T1-E3 Product Introduction

The SI9243AEY-T1-E3 from Vishay Siliconix is a monolithic single-ended bus transceiver designed for bidirectional serial communication in automotive diagnostic applications compliant with the ISO 9141 standard. Operating from a 6V to 36V battery supply, it provides the physical layer interface between a microcontroller UART and the single-wire K/L diagnostic bus. The device features comprehensive protection including reverse battery protection down to -24V, overtemperature shutdown, short-circuit protection to VBAT, and defined output states for fault conditions. With typical transmit speeds of 200kBaud and ultra-low 1μA standby current, it is well-suited for automotive ECU diagnostic ports and service tool interfaces.

Working Principle: SI9243AEY-T1-E3 Working Principle

The SI9243AEY operates as a bidirectional single-ended bus transceiver. (1) In transmit mode (TX low), the internal MOSFET pulls the K line low, with the TX signal inverted and driven onto the bus. The processor monitors RXK and TX to verify correct bus operation, detecting faults when they do not mirror each other. (2) In receive mode, the K and L pin voltages are internally compared to VBAT/2. If the bus voltage is below VBAT/2, RXK/RXL output low; if above, they output high. (3) Protection circuits include overtemperature shutdown that disables the K output when the die temperature exceeds the threshold, and short-circuit detection that disables the K output and sets the fault flag when VBAT short is detected. (4) The fault output (open-drain) provides an interrupt to the microcontroller when overtemperature or short-circuit conditions occur.

Pin Description: SI9243AEY-T1-E3 Pin Definition and Functions
Pin Name Function
1 TX Transmit data input (active low)
2 RXL Receive L line data output
3 RXK Receive K line data output
4 VBAT Battery supply (6-36V)
5 L L line bus connection
6 K K line bus connection
7 GND Ground
8 VDD Logic supply (5V)
Application Scenarios: In which products and applications is SI9243AEY-T1-E3 used
  • Automotive OBD-II diagnostic connector K-line interface
  • Vehicle ECU diagnostic communication ports per ISO 9141
  • Automotive service tool K/L-line adapters
  • ISO 9141 protocol converters and gateway modules
  • Industrial single-wire bus communication with high-voltage protection
Alternative Models: What chips are recommended as replacements for SI9243AEY-T1-E3
Model Manufacturer Key Difference
SI9243AEY Vishay Standard (non-lead-free) version
L9637D STMicroelectronics ISO 9141 transceiver, SOIC-8
MC33290 NXP ISO K-line transceiver, SOIC-8
TJA1021T NXP LIN transceiver (different protocol)
SN65HVDA100 TI ISO 9141 transceiver

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1