Opens in a new tab

SMAJ12CA-13-F

12V bidirectional TVS diode, 400W peak pulse power, SMA (DO-214AC) package, AEC-Q101 qualified for automotive ESD protection

2184

Effective Inventory

Image for reference only

Manufacturer Part:

SMAJ12CA-13-F

Package:

SMA (DO-214AC)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SMAJ12CA-13-F from Diodes Incorporated is a 12V bidirectional TVS (Transient Voltage Suppressor) diode in an SMA (DO-214AC) package. It provides ESD protection and transient surge suppression for sensitive electronic circuits, offering a breakdown voltage of 13.3V minimum and a clamping voltage of 19.9V at peak pulse current.

Key Specifications

Reverse Standoff Voltage (VRWM) 12V
Breakdown Voltage (VBR) 13.3V min / 14.7V max
Clamping Voltage (VC) @ IPP 19.9V @ 5.03A
Peak Pulse Power (PPP) 400W (10/1000μs)
Peak Pulse Current (IPP) 5.03A
Leakage Current (IR) 1μA max @ VRWM
Configuration Bidirectional
Package SMA (DO-214AC)

Features

  • 400W peak pulse power dissipation (10/1000μs waveform)
  • Bidirectional protection for AC signal lines
  • Low leakage current (1μA max) at standoff voltage
  • Fast response time for ESD protection
  • IEC 61000-4-2 ESD protection compliance
  • AEC-Q101 qualified for automotive applications
  • Compact SMA surface mount package

Applications

  • ESD protection on data and signal lines
  • Power supply transient suppression
  • Automotive electronics protection
  • RS-485 and CAN bus surge protection
  • Consumer electronics interface protection
Product Introduction: SMAJ12CA-13-F Product Introduction

The SMAJ12CA-13-F is a bidirectional transient voltage suppressor (TVS) diode from Diodes Incorporated, designed to protect sensitive electronic components from voltage transients caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning-induced surges. The device features a reverse standoff voltage of 12V, making it suitable for 12V bus protection in automotive and industrial applications. The bidirectional configuration allows protection of AC signal lines where voltage can swing both above and below ground. Housed in an SMA (DO-214AC) surface mount package, the SMAJ12CA-13-F offers 400W peak pulse power dissipation and is AEC-Q101 qualified for automotive use.

Working Principle: SMAJ12CA-13-F Working Principle

The SMAJ12CA-13-F operates as a bidirectional clamping device using two back-to-back avalanche diode junctions. Under normal operating conditions, when the voltage across the device remains within the standoff voltage (±12V), the TVS presents a very high impedance with leakage current less than 1μA, effectively being invisible to the protected circuit. When a transient voltage exceeds the breakdown voltage (±13.3V minimum), the avalanche junction activates and the device enters a low-impedance state, diverting the surge current away from the protected circuit. The voltage is clamped to a maximum of 19.9V at the rated peak pulse current of 5.03A. Once the transient subsides, the device automatically returns to its high-impedance state.

Pin Description: SMAJ12CA-13-F Pin Definition and Functions
Pin Name Description
1 Cathode/Anode Bidirectional terminal 1; connects to protected line or ground
2 Anode/Cathode Bidirectional terminal 2; connects to protected line or ground
Application Scenarios: In which products and applications is SMAJ12CA-13-F used
  • Automotive 12V Bus Protection: Suppresses load dump and transient surges on 12V power rails in vehicle electronics
  • RS-485/CAN Bus Protection: Shields communication transceivers from common-mode and differential surges
  • ESD Protection on Data Lines: Provides IEC 61000-4-2 compliant protection for USB, HDMI, and other high-speed interfaces
  • Industrial Control I/O: Protects sensor inputs and actuator outputs from EFT and surge events
Alternative Models: What chips are recommended as replacements for SMAJ12CA-13-F
Model Manufacturer VRWM PPP Direction
SMAJ12A Littelfuse 12V 400W Unidirectional
SMAJ12CA Littelfuse 12V 400W Bidirectional
P6KE12CA onsemi 12V 600W Bidirectional
SMBJ12CA Diodes Inc 12V 600W Bidirectional
SMAJ13CA-13-F Diodes Inc 13V 400W Bidirectional

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1