Opens in a new tab

SMAJ33CA

TVS Diode, 600W Bi-dir, 33V WM, 53.3V Clamp, SMA

34567

Effective Inventory

Image for reference only

Manufacturer Part:

SMAJ33CA

Package:

SMA / DO-214AC (5.2 x 2.6 x 2.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SMAJ33CA from Littelfuse is a 600W bidirectional TVS diode with 33V working voltage and 53.3V clamping voltage in an SMA (DO-214AC) package.

Key Specifications

Type 600W Bidirectional TVS Diode
Peak Pulse Power (PPPM) 600 W @ 10/1000 us
Working Voltage (VRWM) 33 V
Breakdown Voltage (VBR) 36.7 V (min) ~ 40.6 V (max)
Clamping Voltage (VC) 53.3 V @ IPP=11.3A
Peak Pulse Current (IPP) 11.3 A
Leakage Current (IR) 1 uA (max) @ VRWM
Configuration Bidirectional (CA suffix)
Package SMA (DO-214AC)
Operating Temperature -55C to +150C

Features

  • 600W peak pulse power dissipation
  • 33V bidirectional protection
  • 53.3V clamping voltage at 11.3A
  • Low 1uA leakage current at working voltage
  • SMA surface mount package
  • CA suffix: bidirectional protection

Applications

  • 24V/28V power line transient protection
  • Industrial control signal line protection
  • Automotive load dump protection
  • RS-485 bus ESD/surge protection
Product Introduction: SMAJ33CA Product Introduction

The SMAJ33CA from Littelfuse is a 600W bidirectional transient voltage suppression (TVS) diode in an SMA (DO-214AC) surface mount package. The device protects sensitive electronics from voltage transients caused by ESD, EFT, and surge events. The 33V working voltage (VRWM) is suitable for protecting 24V and 28V power rails. The bidirectional configuration (CA suffix) clamps both positive and negative transients, making it ideal for AC signal lines and bidirectional data buses. When the transient voltage exceeds the breakdown voltage (36.7-40.6V), the TVS diode avalanches and clamps the voltage to 53.3V at the peak pulse current of 11.3A. The 600W rating is specified for a 10/1000us waveform per IEC 61000-4-5. The 1uA maximum leakage current at the working voltage minimizes power consumption in always-on protection circuits.

Working Principle: SMAJ33CA Working Principle

The SMAJ33CA uses two back-to-back avalanche diodes in a single chip to provide bidirectional voltage clamping. In normal operation, both diodes are reverse-biased at voltages below VRWM (33V), drawing only the specified leakage current (1uA max). When a positive transient exceeds the breakdown voltage (VBR = 36.7-40.6V), one diode avalanches and the other diode conducts in the forward direction. The combined voltage is the clamping voltage (VC = 53.3V at 11.3A). For negative transients, the roles reverse. The avalanche mechanism is a quantum tunneling effect where the high electric field in the depletion region accelerates carriers to energies sufficient to create electron-hole pairs through impact ionization, creating a self-sustaining multiplication that rapidly increases current. The 600W peak pulse power is limited by the thermal mass of the silicon chip and the package, with the energy absorbed during the 10/1000us pulse raising the junction temperature to near its limit.

Pin Description: SMAJ33CA Pin Definition and Functions
Pin Name Type Function
1 Anode Terminal Terminal 1 (bidirectional)
2 Cathode Terminal Terminal 2 (bidirectional)
Application Scenarios: In which products and applications is SMAJ33CA used
  • 24V industrial power rail protection against IEC 61000-4-5 surge (600W)
  • RS-485 bus bidirectional ESD/surge protection with 33V standoff
  • 28V automotive accessory power load dump protection
  • PLC analog input channel bidirectional transient protection
Alternative Models: What chips are recommended as replacements for SMAJ33CA
Manufacturer Part Number Package Notes
Littelfuse SMBJ33CA SMB Same specs, larger SMB package
onsemi SMAJ33CA SMA Pin-compatible equivalent
Bourns SMAJ33CA SMA Pin-compatible equivalent
Littelfuse SMAJ33A SMA Unidirectional version
Littelfuse SMAJ30CA SMA 30V version for 24V rails

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1