Opens in a new tab

SMBJ33CA

TVS Diode, 600W Bi-dir, 33V WM, 53.3V Clamp, SMB

23456

Effective Inventory

Image for reference only

Manufacturer Part:

SMBJ33CA

Package:

SMB / DO-214AA (5.3 x 3.6 x 2.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SMBJ33CA from Littelfuse is a 600W bidirectional TVS diode with 33V working voltage and 53.3V clamping voltage in an SMB (DO-214AA) package with improved thermal performance.

Key Specifications

Type 600W Bidirectional TVS Diode
Peak Pulse Power (PPPM) 600 W @ 10/1000 us
Working Voltage (VRWM) 33 V
Breakdown Voltage (VBR) 36.7 V (min) ~ 40.6 V (max)
Clamping Voltage (VC) 53.3 V @ IPP=11.3A
Peak Pulse Current (IPP) 11.3 A
Leakage Current (IR) 1 uA (max) @ VRWM
Configuration Bidirectional (CA suffix)
Package SMB (DO-214AA)
Operating Temperature -55C to +150C

Features

  • 600W peak pulse power dissipation
  • 33V bidirectional protection
  • SMB package with better thermal performance than SMA
  • Low 1uA leakage current
  • Bidirectional (CA suffix)

Applications

  • 24V/28V power line transient protection
  • Automotive electrical system protection
  • Industrial surge protection
  • Telecom line protection
Product Introduction: SMBJ33CA Product Introduction

The SMBJ33CA from Littelfuse is a 600W bidirectional TVS diode in an SMB (DO-214AA) package, electrically identical to the SMAJ33CA but with a larger package that provides better thermal performance and higher average power dissipation capability. The SMB package’s larger solder footprint and increased body size reduce the thermal resistance from junction to PCB, allowing the device to absorb repetitive transients with lower temperature rise. The 33V working voltage suits 24V and 28V industrial and automotive systems. The bidirectional configuration clamps both positive and negative transients. For applications where PCB space allows, the SMBJ version is preferred over the SMAJ for improved long-term reliability under repetitive surge conditions.

Working Principle: SMBJ33CA Working Principle

The SMBJ33CA operates identically to the SMAJ33CA, using back-to-back avalanche diodes for bidirectional clamping. The key difference is in the package thermal characteristics: the SMB package has lower thermal resistance (Rth(j-a) approximately 75 K/W vs 100 K/W for SMA) due to its larger body and solder area. This means the device can absorb repetitive transients with less junction temperature rise, or equivalently, can handle higher average power dissipation. The silicon die itself is the same as in the SMAJ version. The clamping mechanism is identical: when the transient voltage exceeds VBR, the avalanche multiplication creates a low-impedance path that limits the voltage across the protected circuit to VC (53.3V at 11.3A).

Pin Description: SMBJ33CA Pin Definition and Functions
Pin Name Type Function
1 Anode Terminal Terminal 1 (bidirectional)
2 Cathode Terminal Terminal 2 (bidirectional)
Application Scenarios: In which products and applications is SMBJ33CA used
  • 28V automotive power distribution with repetitive load dump transients
  • 24V DIN rail power supply output protection with SMB thermal margin
  • Telecom -48V bus bidirectional surge protection (use SMBJ58CA)
  • Motor drive power stage transient voltage clamping
Alternative Models: What chips are recommended as replacements for SMBJ33CA
Manufacturer Part Number Package Notes
Littelfuse SMAJ33CA SMA Same specs, smaller SMA package
onsemi SMBJ33CA SMB Pin-compatible equivalent
Bourns SMBJ33CA SMB Pin-compatible equivalent
Littelfuse SMBJ33A SMB Unidirectional version
Littelfuse SMBJ36CA SMB 36V version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1