Opens in a new tab

SMD050F-2

500mA hold / 1A trip PTC resettable fuse, 15V, 1206 SMD, self-resetting

5034

Effective Inventory

Image for reference only

Manufacturer Part:

SMD050F-2

Package:

1206 (3.2 x 1.6 x 0.8mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SMD050F-2 from Bourns is a surface-mount PTC resettable fuse (Polyfuse) with a hold current of 500mA and trip current of 1.0A. It provides overcurrent protection that automatically resets when the fault is removed, in a compact 1206 chip package.

Key Specifications

Hold Current (IH) 500 mA
Trip Current (IT) 1.0 A
Max Voltage Rating 15V DC
Max Fault Current 40 A
Initial Resistance 0.15 Ohm (typical)
Trip Time (5x IH) 1.5s (max)
Operating Temperature -40 to 85 C
Package 1206 (3216 metric)

Features

  • Self-resetting overcurrent protection
  • Low initial resistance of 0.15 Ohm
  • Compact 1206 chip footprint
  • No mechanical parts to wear out
  • UL, CSA, and TUV recognized

Applications

  • USB port overcurrent protection
  • Speaker and audio line protection
  • Battery charger short-circuit protection
  • Motor stall protection
  • General-purpose circuit protection
Product Introduction: SMD050F-2 Product Introduction

The SMD050F-2 from Bourns is a surface-mount PTC (Positive Temperature Coefficient) resettable fuse that provides self-resetting overcurrent protection. With a hold current of 500mA and trip current of 1.0A, it protects circuits from overcurrent faults and automatically resets when the fault condition is removed. The device has low initial resistance (0.15 Ohm typical) and is rated for 15V DC maximum voltage. The compact 1206 chip package enables use in space-constrained applications such as USB ports and battery charger circuits.

Working Principle: SMD050F-2 Working Principle

The SMD050F-2 operates as a polymer-based PTC resettable fuse using a positive temperature coefficient material. **Normal Operation**: Below the hold current (500mA), the PTC element maintains low resistance (0.15 Ohm typical). Current flows normally with minimal voltage drop and power dissipation. **Overcurrent Trip**: When current exceeds the trip threshold (1.0A), resistive heating (I2R) raises the polymer temperature. At the Curie point, the crystalline polymer transitions to an amorphous state, causing the conductive particles embedded in the polymer to separate dramatically. This increases resistance by several orders of magnitude, effectively limiting the fault current to a small leakage value. **Reset Mechanism**: When the fault is removed and the device cools, the polymer recrystallizes and the conductive particles reconnect, restoring low resistance. This self-resetting behavior eliminates the need to replace fuses after overcurrent events. **Time-Current Characteristic**: The trip time depends on the fault current magnitude. At 5x hold current (2.5A), the device trips within 1.5 seconds maximum, providing fast protection for sensitive circuits.

Pin Description: SMD050F-2 Pin Definition and Functions
Pin Name Description
1 Terminal 1 One end of PTC element
2 Terminal 2 Other end of PTC element
Application Scenarios: In which products and applications is SMD050F-2 used
  • USB Protection: Self-resetting overcurrent protection for USB 2.0/3.0 ports (500mA limit)
  • Audio Protection: Speaker line protection against amplifier clipping and short circuits
  • Battery Charger: Short-circuit protection in Li-ion charger circuits with auto-recovery
  • Motor Drivers: Stall and locked-rotor current limiting for small DC motors
  • I/O Protection: General-purpose I/O port current limiting in embedded systems
Alternative Models: What chips are recommended as replacements for SMD050F-2
Model Manufacturer Key Difference
SMD075F-2 Bourns 750mA hold, 1.5A trip, same package
0ZCJ0050FF2E Bel Fuse 500mA hold, 1206 PTC
minismd075 TE Connectivity 750mA hold, 0805, smaller
PTCFUSE500MA Littelfuse 500mA hold, 1206 PTC
SMD100F-2 Bourns 1.0A hold, 1206, higher current

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1