Opens in a new tab

SMUN5313DW1T1G

Dual NPN/PNP pre-biased digital transistor, 50V, 100mA, R1=R2=47kΩ, SOT-363, AEC-Q101

11947

Effective Inventory

Image for reference only

Manufacturer Part:

SMUN5313DW1T1G

Package:

SOT-363 (SC-88) (2.0 x 1.25 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The onsemi SMUN5313DW1T1G is a dual complementary pre-biased digital transistor integrating one NPN and one PNP transistor with built-in bias resistors in a single SOT-363 (SC-88) package. Designed for AEC-Q101 automotive applications, it simplifies circuit design by eliminating external bias resistors, with R1 = R2 = 47 kΩ for both transistors.

Key Specifications

Configuration Dual (1 NPN + 1 PNP)
VCEO Max 50 V (both polarities)
IC Max 100 mA
R1 (Input Resistor) 47 kΩ (both)
R2 (Emitter Resistor) 47 kΩ (both)
hFE Min 80
VCE(sat) Max 0.25 V
Ptot Max 385 mW
Operating Temperature -55 °C to +150 °C
Package SOT-363 (SC-88)

Features

  • Dual complementary NPN/PNP pre-biased transistors in one package
  • Built-in bias resistors (R1 = R2 = 47 kΩ) reduce component count
  • AEC-Q101 qualified for automotive applications
  • Low saturation voltage: 0.25 V max at IC = 10 mA
  • Wide operating temperature: -55 °C to +150 °C
  • MSL 1 (unlimited floor life)
  • Pb-free, RoHS compliant

Applications

  • Automotive digital signal switching and inverter circuits
  • LED indicator drivers
  • Logic-level interface circuits
  • General-purpose digital switching in space-constrained designs
Product Introduction: SMUN5313DW1T1G Product Introduction

The onsemi SMUN5313DW1T1G is a dual complementary pre-biased digital transistor that integrates one NPN and one PNP transistor with built-in 47 kΩ bias resistors in a compact SOT-363 (SC-88) package. The integrated R1 (input) and R2 (base-emitter) resistors eliminate the need for external bias components, reducing PCB area and BOM cost. With a collector-emitter voltage rating of 50 V for both polarities and continuous collector current of 100 mA, the device is suitable for driving small loads and interfacing logic signals. The complementary NPN/PNP pair enables push-pull output stages and signal inversion in a single package. AEC-Q101 qualification ensures automotive-grade reliability across the -55 °C to +150 °C temperature range. The device features a minimum DC current gain (hFE) of 80 and maximum collector-emitter saturation voltage of 0.25 V, providing efficient switching performance.

Working Principle: SMUN5313DW1T1G Working Principle

The SMUN5313DW1T1G integrates two independent pre-biased transistor circuits within a single 6-pin SOT-363 package. Each transistor has a built-in series base resistor (R1 = 47 kΩ) that limits base current when a logic-level input is applied, and a parallel base-emitter resistor (R2 = 47 kΩ) that provides a defined turn-off path for leakage current and stored charge. When the input voltage exceeds the turn-on threshold (approximately 0.9 V for NPN, 1.0 V for PNP at IC = 10 mA), current flows through R1 into the base, turning on the transistor. When the input goes low, R2 discharges the base-emitter capacitance, ensuring fast and reliable turn-off. The NPN and PNP transistors are electrically independent, allowing them to be used in complementary configurations such as push-pull drivers, signal inverters, or as two independent switches. The 47 kΩ / 47 kΩ resistor ratio (R1/R2 = 1) provides balanced switching characteristics.

Pin Description: SMUN5313DW1T1G Pin Definition and Functions
Pin Name Type Function
1 B1 Input NPN base input (via R1=47kΩ)
2 E2 Output PNP emitter
3 C2 Output PNP collector
4 B2 Input PNP base input (via R1=47kΩ)
5 E1 Ground NPN emitter
6 C1 Output NPN collector
Application Scenarios: In which products and applications is SMUN5313DW1T1G used
  • Automotive logic signal inversion and level shifting
  • LED indicator driver circuits in dashboard displays
  • Push-pull output stage for relay and solenoid control
  • Space-saving digital switching in body electronics
Alternative Models: What chips are recommended as replacements for SMUN5313DW1T1G
Manufacturer Part Number Package Notes
Infineon BCR08PNH6327XTSA1 SOT-363 Dual NPN/PNP, R1=2.2kΩ/R2=47kΩ
Rohm UMH3NTN SOT-363 Dual NPN/PNP pre-biased
Nexperia PMBT3904 SOT-23 Single NPN alternative (no bias resistors)
Diodes Inc DAN202K SOT-363 Dual NPN digital transistor

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1