Opens in a new tab

SN65HVD230

3.3V CAN transceiver, 1Mbps, slope control, standby, ISO 11898-2, SOIC-8

23321

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD230

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN65HVD230 from Texas Instruments is a 3.3V CAN bus transceiver compatible with ISO 11898-2 in an 8-pin SOIC package. With 1Mbps data rate, slope control for EMC optimization, standby mode with 370uA current, and +/-16kV bus ESD protection, it is designed for 3.3V microcontroller CAN interfaces.

Key Specifications

Protocol CAN (ISO 11898-2)
Data Rate 1 Mbps (max)
Supply Voltage 3.0V to 3.6V
Common-Mode Range -2V to +7V on bus
Bus ESD Protection +/-16 kV HBM
Standby Current 370 uA (typ)
Nodes per Bus Up to 120
Operating Temperature -40 to +85 C
Package SOIC-8

Features

  • 3.3V single supply operation
  • ISO 11898-2 compatible CAN transceiver
  • 1Mbps data rate
  • Slope control via RS pin for EMC optimization
  • Low-current standby mode (370uA)
  • Listen-only mode (receiver active, driver off)
  • VCC/2 reference output on VREF pin
  • +/-16kV bus pin ESD protection
  • Cross-wire, loss-of-ground, and overvoltage protection
  • Thermal shutdown protection
  • Unpowered node does not disturb the bus
  • Pin-compatible with PCA82C250 footprint

Applications

  • 3.3V MCU CAN bus interfaces
  • Industrial automation and control
  • Motor and robotics control
  • Building and HVAC control
Product Introduction: SN65HVD230 Product Introduction

The SN65HVD230 from Texas Instruments is a 3.3V CAN bus transceiver compatible with the ISO 11898-2 high-speed CAN physical layer standard in an 8-pin SOIC package. Designed specifically for use with 3.3V microcontrollers and DSPs, it eliminates the need for a 5V supply typically required by 5V CAN transceivers like the PCA82C250. The RS (pin 8) provides three operating modes: high-speed mode (RS=GND), slope-control mode (RS=resistor to GND), and low-power standby mode (RS=HIGH). In standby mode, the driver is disabled but the receiver remains active (listen-only), consuming only 370uA. The VREF pin provides a VCC/2 reference voltage for CAN controller threshold comparison. With +/-16kV bus ESD protection, thermal shutdown, and fault-tolerant design, it operates reliably in harsh industrial environments.

Working Principle: SN65HVD230 Working Principle

The SN65HVD230 operates through four subsystems: (1) CAN Transmitter: A differential driver converts the single-ended TXD input to a CAN bus differential signal (CANH – CANL > 0.9V for dominant, < 0.5V for recessive). The driver output slope is controlled by the RS pin to optimize EMC performance. In high-speed mode (RS=GND), the driver switches as fast as possible. With a resistor to GND, the slew rate is proportional to the current flowing out of RS. (2) CAN Receiver: A differential receiver converts the bus signal to a single-ended RXD output. The receiver operates over a -2V to +7V common-mode range and can withstand +/-25V common-mode transients. Open-circuit fail-safe design ensures recessive output when the bus is floating. (3) Mode Control (RS Pin): RS=GND selects high-speed mode. RS=resistor to GND selects slope-control mode (10kOhm gives ~15V/us, 100kOhm gives ~2V/us). RS=HIGH selects standby mode where the driver is disabled but the receiver continues monitoring the bus. (4) Protection: Thermal shutdown disables the driver above 165C. Cross-wire protection, loss-of-ground, and overvoltage protection ensure robustness. An unpowered node presents high impedance to the bus, not disturbing other nodes.

Pin Description: SN65HVD230 Pin Definition and Functions
Pin Name Type Description
1 D Input Transmit data input (from MCU CAN controller)
2 GND Power Ground
3 VCC Power 3.3V supply voltage
4 R Output Receive data output (to MCU CAN controller)
5 VREF Output Reference voltage output (VCC/2)
6 CANL I/O CAN bus low line
7 CANH I/O CAN bus high line
8 RS Input Mode select/slope control (GND=high-speed, R=slope, HIGH=standby)
Application Scenarios: In which products and applications is SN65HVD230 used
  • 3.3V MCU CAN interface with slope control for EMC-compliant industrial automation networks
  • Motor control CAN bus with 370uA standby mode for battery-powered portable equipment
  • Building HVAC CAN network with +/-16kV ESD protection and thermal shutdown
  • Automotive diagnostic CAN with VREF output for CAN controller reference threshold
Alternative Models: What chips are recommended as replacements for SN65HVD230
Model Manufacturer Supply Standby Notes
SN65HVD231 TI 3.3V 40nA Sleep mode (both RX and TX off)
SN65HVD232 TI 3.3V N/A Basic transceiver, no mode pin
MCP2551-I/SN Microchip 5V N/A 5V alternative
TJA1050T NXP 5V N/A 5V high-speed CAN

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1