Product Overview
The SN65LVDM176DGKR is a high-speed differential line transceiver from Texas Instruments, packaged in an 8-pin VSSOP (DGK) package. It operates in half-duplex mode with one driver and one receiver, supporting signaling rates up to 400 Mbps. The device uses LVDM (Low-Voltage Differential Multipoint) signaling with doubled output current compared to standard LVDS, providing 350 mV typical differential output into a 50 Ω load.
Key Specifications
| Function | Half-Duplex LVDM Differential Transceiver |
| Data Rate | 400 Mbps |
| Configuration | 1 driver + 1 receiver (half-duplex) |
| Signaling | LVDM (LVDS-compatible, doubled current) |
| Output Voltage | 350 mV (typ) differential into 50 Ω |
| Input Sensitivity | 50 mV differential |
| Propagation Delay | 1.7 ns (driver typ), 3.7 ns (receiver typ) |
| ESD Protection | > 15 kV HBM on bus pins |
| Supply | 3.3V (3.0-3.6V) |
| Package | VSSOP-8 (3.0 × 4.9 mm) |
| Operating Temperature | -40°C to +85°C |
Features
- LVDM signaling with doubled output current for multipoint bus applications
- Half-duplex or multipoint baseband data transmission
- Backplane and cable differential bus interfaces
- Industrial automation fieldbus communication
- Telecom rack inter-board signaling
- Video surveillance camera data links
- Multipoint LVDS backplane bus in telecom chassis with multiple board slots
- Half-duplex industrial fieldbus over twisted-pair cable at 400 Mbps
- Video surveillance camera bidirectional data link over Cat5e cable
- Server rack inter-board high-speed signaling with multipoint topology
- Automotive infotainment backbone bus with half-duplex LVDM transceivers
Applications
Product Introduction: SN65LVDM176DGKR Product Introduction
The SN65LVDM176 is a high-speed differential line transceiver that combines one LVDM driver and one LVDM receiver in a single 8-pin VSSOP package for half-duplex communication. The LVDM (Low-Voltage Differential Multipoint) signaling standard is compatible with LVDS but provides twice the output current drive, enabling multipoint bus configurations where multiple transceivers share the same differential bus. The driver delivers a 350 mV typical differential output voltage into a 50 Ω load, and the receiver features 50 mV input sensitivity with open-circuit fail-safe. The device supports signaling rates up to 400 Mbps, making it suitable for high-speed backplane, cable, and point-to-point interconnects.
Working Principle: SN65LVDM176DGKR Working Principle
The SN65LVDM176 driver converts a single-ended LVTTL/LVCMOS input (D pin) into a differential current-mode output (Y/Z pins). The driver sources approximately 8 mA of current into a 100 Ω termination resistor between the Y and Z outputs, producing a 350 mV (8 mA × 50 Ω) differential voltage swing. This doubled current (compared to standard 3.5 mA LVDS) allows the signal to drive multipoint buses with multiple 100 Ω terminations. The receiver detects differential voltages as small as 50 mV on the A/B bus pins and converts them to a single-ended LVTTL/LVCMOS output on the R pin. An open-circuit fail-safe feature ensures the receiver output is high when the bus inputs are floating. The driver and receiver enable pins (DE and RE) control the direction for half-duplex operation — when DE is low and RE is high, both driver and receiver are disabled, and the bus pins present a high-impedance load to the shared bus.
Pin Description: SN65LVDM176DGKR Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | Output | Receiver data output (LVTTL/LVCMOS) |
| 2 | RE_N | Input | Receiver enable — active low |
| 3 | DE | Input | Driver enable — active high |
| 4 | D | Input | Driver data input (LVTTL/LVCMOS) |
| 5 | GND | Power | Ground |
| 6 | Y | Output | Driver non-inverting output (LVDM bus) |
| 7 | Z | Output | Driver inverting output (LVDM bus) |
| 8 | VCC | Power | 3.3V supply |
Application Scenarios: In which products and applications is SN65LVDM176DGKR used
Alternative Models: What chips are recommended as replacements for SN65LVDM176DGKR
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| TI | SN65LVDS179DGKR | VSSOP-8 | LVDS version, standard 3.5 mA drive |
| TI | SN65LVDM180DGKR | VSSOP-8 | Full-duplex LVDM transceiver pair |
| Maxim | MAX9156 | SOIC-8 | 400Mbps LVDS repeater |
| Renesas | PI90LV047A | SOIC-8 | Quad LVDS driver |
| onsemi | NBS1LVDS31 | SOIC-8 | Single LVDM driver |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






