Opens in a new tab

Home » Integrated Circuits ICs » SN74ACT244DBR

SN74ACT244DBR

Octal buffer/line driver, 3-state, TTL-level, SO-20

12323

Effective Inventory

Image for reference only

Manufacturer Part:

SN74ACT244DBR

Package:

SSOP-20

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74ACT244DBR from TI is an octal buffer/line driver with 3-state outputs in the ACT family (TTL inputs, CMOS outputs, ±24 mA drive). Two independent 4-bit sections with separate enables provide bus buffering and driving for high-capacitance loads.

Key Specifications

Function Octal buffer/line driver with 3-state
Supply Voltage 4.5V to 5.5V
Propagation Delay 8 ns at 5V
Output Drive ±24 mA (ACT)
Input Logic TTL compatible
Package SSOP-20 (5.3×7.2mm)

Working Principle

Two 4-bit sections each have an active-low output enable (1OE, 2OE). When enabled, outputs follow inputs with 8 ns propagation delay. When disabled, outputs are high-impedance for bus sharing. ACT family combines TTL-compatible input thresholds with high-drive CMOS outputs for robust 5V bus interfacing.

Applications

  • 5V bus buffering
  • Address/data driver
  • Memory interface
  • Capacitive load driving
Product Introduction: SN74ACT244DBR Product Introduction

The SN74ACT244DBR from TI is an octal buffer/line driver with 3-state outputs in the ACT family (TTL inputs, CMOS outputs, ±24 mA drive). Two independent 4-bit sections with separate enables provide bus buffering and driving for high-capacitance loads.

Working Principle: SN74ACT244DBR Working Principle

Two 4-bit sections each have an active-low output enable (1OE, 2OE). When enabled, outputs follow inputs with 8 ns propagation delay. When disabled, outputs are high-impedance for bus sharing. ACT family combines TTL-compatible input thresholds with high-drive CMOS outputs for robust 5V bus interfacing.

Pin Description: SN74ACT244DBR Pin Definition and Functions
Pin Name Description
1 1OE Section 1 output enable
2-5,16-19 I/O Inputs/outputs
10 GND Ground
20 VCC 5V supply
Application Scenarios: In which products and applications is SN74ACT244DBR used
  • 5V bus buffering
  • Address/data driver
  • Memory interface
  • Capacitive load driving
Alternative Models: What chips are recommended as replacements for SN74ACT244DBR
Model Manufacturer Key Difference
74HC244 Nexperia Lower drive (±5mA)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1