Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » SN74AVC2T245RSWR

SN74AVC2T245RSWR

2-bit dual-supply transceiver, 2 DIR pins, 500Mbps, 1.2-3.6V, UQFN-10

6200

Effective Inventory

Image for reference only

Manufacturer Part:

SN74AVC2T245RSWR

Package:

UQFN-10 / RSW-10 (1.80 x 1.40 x 0.5mm, 0.4mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74AVC2T245RSWR from Texas Instruments is a dual-bit dual-supply bus transceiver with configurable voltage translation and 2 independent direction-control pins in a 10-pin UQFN (1.8 x 1.4mm) package. Each channel has independent direction control, supporting 500Mbps data rate for 1.8V-to-3.3V level shifting.

Key Specifications

Number of Bits 2
Direction Control 2 independent DIR pins
Data Rate (max) 500 Mbps (1.8V to 3.3V)
VCCA Range 1.2V to 3.6V
VCCB Range 1.2V to 3.6V
I/O Voltage Tolerance 4.6V (over-voltage tolerant)
Supply Current (max) 16 µA
Ioff Support Yes (partial power-down)
VCC Isolation Yes (both ports Hi-Z if either VCC = GND)
ESD Protection 5000V HBM
Operating Temperature -40 to +85°C
Package UQFN-10 (RSW suffix)

Features

  • 2-bit dual-supply transceiver with configurable level shifting
  • 2 independent DIR pins for per-channel direction control
  • 500Mbps at 1.8V to 3.3V; 240Mbps at 1.2V translation
  • Both ports operate over full 1.2V to 3.6V range
  • 4.6V tolerant I/Os
  • Control inputs referenced to VCCA
  • VCC isolation — both ports Hi-Z if either supply is GND
  • Ioff for partial power-down support
  • 3-state outputs
  • 100mA latch-up (JESD 78 Class II)

Applications

  • JTAG level translation
  • Multi-voltage bus bridging
  • FPGA/CPU interface voltage adaptation
  • Portable device mixed-voltage communication
Product Introduction: SN74AVC2T245RSWR Product Introduction

The SN74AVC2T245RSWR from TI is a 2-bit dual-supply bus transceiver with independent direction control per channel in UQFN-10 (1.8×1.4mm). Each port operates from 1.2-3.6V with 4.6V tolerant I/Os. 500Mbps data rate for 1.8V-to-3.3V translation. Two DIR pins (DIR1, DIR2) allow each channel to operate independently. RSW suffix denotes UQFN-10, R suffix denotes tape-and-reel. Ideal for JTAG and multi-voltage bus bridging in space-constrained applications.

Working Principle: SN74AVC2T245RSWR Working Principle

The SN74AVC2T245 uses direction-controlled architecture where each of the two channels has its own DIR pin. When DIR is high, data flows from A port to B port; when DIR is low, data flows from B port to A port. The OE pin (referenced to VCCA) enables or disables both channels simultaneously — when OE is high, both output ports are in 3-state (Hi-Z). The dual-supply architecture allows each port to operate at a different voltage, with the voltage translation occurring internally. The 4.6V tolerant I/Os allow connection to higher-voltage nodes even when VCC is as low as 1.2V. The VCC isolation feature ensures both ports enter Hi-Z if either VCC is at GND, critical for hot-swap and power-sequencing scenarios.

Pin Description: SN74AVC2T245RSWR Pin Definition and Functions
Pin Name Type Function
1 VCCA Power A-port supply (1.2-3.6V)
2 A1 I/O A-port data bit 1
3 A2 I/O A-port data bit 2
4 OE# Input Output enable (active low, referenced to VCCA)
5 GND Ground Ground
6 DIR2 Input Direction control channel 2 (referenced to VCCA)
7 VCCB Power B-port supply (1.2-3.6V)
8 B2 I/O B-port data bit 2
9 B1 I/O B-port data bit 1
10 DIR1 Input Direction control channel 1 (referenced to VCCA)
Application Scenarios: In which products and applications is SN74AVC2T245RSWR used
  • JTAG TDI/TDO level translation between 1.8V MCU and 3.3V JTAG header
  • Dual-channel SPI MOSI/MISO voltage bridging with independent directions
  • 1.2V FPGA to 3.3V peripheral bus adapter at 500Mbps
  • Portable device I2C-over-USB bridge with voltage adaptation
Alternative Models: What chips are recommended as replacements for SN74AVC2T245RSWR
Manufacturer Part Number Package Notes
TI SN74AVC2T245DCUR UCSP-10 Smaller 1.45×1.0mm package
TI SN74AVC4T245RSWR UQFN-16 4-bit version with same architecture
NXP 74AVC2T245GF XQFN-10 Pin-compatible alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1