Opens in a new tab

Home » Integrated Circuits ICs » SN74HC573APWR

SN74HC573APWR

Octal transparent D-latch, 3-state outputs, 2-6V, TSSOP-20

14320

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HC573APWR

Package:

TSSOP-20 (6.5 × 4.4 × 1.0 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74HC573APWR is an octal transparent D-type latch with 3-state outputs from Texas Instruments, packaged in a 20-pin TSSOP (PW) package. It features a single output enable and latch enable control, making it ideal for bus-oriented applications where data must be held while other devices access the bus. The HC family provides wide VCC range operation from 2V to 6V.

Key Specifications

Function Octal Transparent D-Type Latch
Bits 8
Supply Voltage 2V to 6V
Output Type 3-State
Propagation Delay 15ns (typ) at 4.5V
Enable Output Enable (OE) + Latch Enable (LE)
Package 20-pin TSSOP (6.5 × 4.4 mm)
Operating Temperature -40°C to +85°C

Features

  • Octal (8-bit) transparent latch in a single device
  • 3-state outputs for bus-oriented applications
  • Transparent latch operation — outputs follow inputs when LE is high
  • Output enable for bus sharing and isolation
  • Wide VCC operating range: 2V to 6V
  • HC family CMOS technology for low power consumption

Applications

  • Microprocessor address/data bus latching
  • I/O port expansion and bus buffering
  • Memory address register holding
  • LED display data latching
  • General-purpose data storage and isolation
Product Introduction: SN74HC573APWR Product Introduction

The SN74HC573A is an octal transparent D-type latch with 3-state outputs from Texas Instruments’ high-speed CMOS logic family. It features eight D-type latches with a common latch enable (LE) and output enable (OE) control. When LE is high, the Q outputs follow the D inputs (transparent mode). When LE goes low, the outputs are latched and retain the data that was present at the inputs before the transition. The 3-state output enable allows the device to be connected directly to a system bus, enabling bus sharing with other devices. The wide 2V to 6V VCC range and low power consumption make it versatile for both 3.3V and 5V systems.

Working Principle: SN74HC573APWR Working Principle

The SN74HC573A contains eight transparent D-type latches. When the latch enable (LE) input is high, data on the D inputs flows through to the Q outputs (transparent mode). When LE transitions from high to low, the data present at the D inputs at that moment is latched and held on the Q outputs. The output enable (OE) is an active-low control that, when asserted, places all eight outputs in a high-impedance (3-state) condition. This allows multiple devices to share a common bus without contention. When OE is high, the outputs are active and drive either high or low logic levels based on the latched data. The 3-state capability combined with the octal width makes this device ideal for microprocessor bus interfacing and data routing.

Pin Description: SN74HC573APWR Pin Definition and Functions
Pin Name Type Function
1 OE Input Output enable — active low, high-Z when high
2 D0 Input Data input 0
3 D1 Input Data input 1
4 D2 Input Data input 2
5 D3 Input Data input 3
6 D4 Input Data input 4
7 D5 Input Data input 5
8 D6 Input Data input 6
9 D7 Input Data input 7
10 GND Power Ground
11 LE Input Latch enable — high = transparent, low = latched
12 Q7 Output Data output 7
13 Q6 Output Data output 6
14 Q5 Output Data output 5
15 Q4 Output Data output 4
16 Q3 Output Data output 3
17 Q2 Output Data output 2
18 Q1 Output Data output 1
19 Q0 Output Data output 0
20 VCC Power Supply voltage (2-6V)
Application Scenarios: In which products and applications is SN74HC573APWR used
  • Microprocessor address bus latching in memory-mapped I/O
  • I/O port expansion for embedded controllers
  • Data bus isolation between processor and peripherals
  • LED display multiplexing data register
  • PLC digital I/O module data holding
Alternative Models: What chips are recommended as replacements for SN74HC573APWR
Manufacturer Part Number Package Notes
TI SN74HC573ADWR SOIC-20 Same function, wider SOIC package
TI SN74HC573ANSR SO-20 Same function, different package option
NXP 74HC573PW TSSOP-20 Pin-compatible equivalent
onsemi MC74HC573ADW SOIC-20 HC octal latch equivalent
Renesas 74HC573T TSSOP-20 Equivalent octal latch

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1