Opens in a new tab

Home » Integrated Circuits ICs » SN74HC595DR

SN74HC595DR

8-bit shift register with 3-state output latches, 2-6V, SOIC-16

3679

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HC595DR

Package:

SOIC-16 (D) (9.9 x 3.9 x 1.58 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74HC595DR from Texas Instruments is an 8-bit serial-in/parallel-out shift register with output latches and 3-state outputs. It is one of the most widely used logic ICs for expanding output capabilities of microcontrollers. Using only 3 GPIO pins (data, clock, latch), it can control 8 output lines, and multiple devices can be daisy-chained for virtually unlimited expansion. The device operates from 2V to 6V and is housed in a 16-pin SOIC package for surface-mount applications.

Key Specifications

Bits 8-bit shift register + 8-bit storage register
Supply Voltage 2V to 6V
Output Type 3-state (high, low, high-impedance)
Output Drive +/-6mA at 5V
Max Clock Frequency 24MHz at 5V
Propagation Delay 13ns typical at 5V
Supply Current 80uA max (ICC)
Input Current 1uA max
Operating Temperature -40 to 85°C
Package SOIC-16 (D)

Features

  • 8-bit serial-in, parallel-out shift register with output storage register
  • Separate clocks for shift and storage registers
  • Direct overriding clear (SRCLR) input
  • 3-state outputs can drive up to 15 LSTTL loads
  • Serial output (QH’) for daisy-chaining multiple devices
  • Low power consumption: 80uA max ICC
  • Wide operating voltage range: 2V to 6V

Applications

  • LED display and matrix driving
  • Microcontroller I/O expansion
  • 7-segment display multiplexing
  • Relay and solenoid driver control
  • Digital logic delay and storage circuits
Product Introduction: SN74HC595DR Product Introduction

The SN74HC595DR from Texas Instruments is a classic 8-bit shift register with output storage register and 3-state outputs, belonging to the 74HC logic family. It is one of the most popular logic ICs in embedded design, used to expand the number of digital outputs available from a microcontroller. Using just three control signals (SER, SRCLK, RCLK), a single device provides 8 output lines, and multiple devices can be cascaded through the serial output (QH’) pin for unlimited expansion. The separate shift and storage registers allow new data to be shifted in while the current output remains stable, preventing flicker in display applications. The SOIC-16 surface-mount package is suitable for automated PCB assembly.

Working Principle: SN74HC595DR Working Principle

The SN74HC595DR contains two 8-bit registers operating in tandem. The shift register accepts serial data on the SER input, clocked in on each rising edge of SRCLK. After 8 bits have been shifted in, the RCLK (register clock) rising edge transfers the shift register contents to the storage register, which directly drives the 8 parallel outputs (QA-QH). The SRCLR (shift register clear) input resets the shift register independently of the storage register. The OE (output enable) input, when high, places all outputs in a high-impedance state, while internal register data and the QH’ serial output remain unaffected. The QH’ output provides the 9th and subsequent shift register bits for daisy-chaining additional 595 devices. This dual-register architecture ensures glitch-free output transitions since outputs only update when RCLK is pulsed.

Pin Description: SN74HC595DR Pin Definition and Functions
Pin Name Type Function
1 QB Output Storage register output B
2 QC Output Storage register output C
3 QD Output Storage register output D
4 QE Output Storage register output E
5 QF Output Storage register output F
6 QG Output Storage register output G
7 QH Output Storage register output H
8 GND Ground Ground
9 QH’ Output Serial output for cascading
10 SRCLR Input Shift register clear (active low)
11 SRCLK Input Shift register clock
12 RCLK Input Storage register clock (latch)
13 OE Input Output enable (active low)
14 SER Input Serial data input
15 QA Output Storage register output A
16 VCC Power Supply voltage (2-6V)
Application Scenarios: In which products and applications is SN74HC595DR used
  • LED matrix and 7-segment display driving with multiplexed control
  • Microcontroller I/O expansion for relay, solenoid, and actuator control
  • Daisy-chained shift register networks for large-scale digital output systems
  • Shift-and-store data buffering in digital communication interfaces
  • Hobbyist and educational projects for GPIO expansion on Arduino/Raspberry Pi
Alternative Models: What chips are recommended as replacements for SN74HC595DR
Manufacturer Part Number Package Notes
TI SN74HC595N DIP-16 Through-hole version
TI SN74HCS595DR SOIC-16 Schmitt trigger inputs version
NXP 74HC595D SOIC-16 Pin compatible equivalent
Microchip 74HC595 SOIC-16 Generic HC595 equivalent
ST M74HC595M1R SOIC-16 Pin compatible, same function

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1