Opens in a new tab

Home » Integrated Circuits ICs » SN74HCT574DWR

SN74HCT574DWR

Octal D-type flip-flop, 3-state, 4.5-5.5V, TTL, DIP/SO-20

3007

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HCT574DWR

Package:

SOIC-20

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74HCT574DWR from TI is an octal D-type edge-triggered flip-flop with 3-state outputs in the HCT (TTL-compatible input) family. The 3-state outputs enable bus sharing, and TTL-compatible inputs allow direct interfacing with bipolar or 5V TTL logic.

Key Specifications

Function Octal D-type flip-flop with 3-state output
Supply Voltage 4.5V to 5.5V
Propagation Delay 20 ns at 5V
Output Drive ±6 mA at 5V
Input Logic TTL compatible (HCT)
Package SOIC-20 (7.6×10.3mm)

Working Principle

On the rising edge of CLK, the 8 D inputs are captured and stored. The active-low OE controls 3-state outputs for bus sharing. When OE=HIGH, outputs are high-impedance. The HCT variant has TTL-compatible input thresholds (VIH=2V, VIL=0.8V) while maintaining CMOS output levels for noise margin.

Applications

  • 5V bus register with tri-state
  • Output port latch
  • Microprocessor I/O expansion
  • TTL-to-CMOS interface
Product Introduction: SN74HCT574DWR Product Introduction

The SN74HCT574DWR from TI is an octal D-type edge-triggered flip-flop with 3-state outputs in the HCT (TTL-compatible input) family. The 3-state outputs enable bus sharing, and TTL-compatible inputs allow direct interfacing with bipolar or 5V TTL logic.

Working Principle: SN74HCT574DWR Working Principle

On the rising edge of CLK, the 8 D inputs are captured and stored. The active-low OE controls 3-state outputs for bus sharing. When OE=HIGH, outputs are high-impedance. The HCT variant has TTL-compatible input thresholds (VIH=2V, VIL=0.8V) while maintaining CMOS output levels for noise margin.

Pin Description: SN74HCT574DWR Pin Definition and Functions
Pin Name Description
1 OE Output enable (active low)
2-9 D1-D8 Data inputs
10 GND Ground
11 CLK Clock
12-19 Q1-Q8 3-state outputs
20 VCC 5V supply
Application Scenarios: In which products and applications is SN74HCT574DWR used
  • 5V bus register with tri-state
  • Output port latch
  • Microprocessor I/O expansion
  • TTL-to-CMOS interface
Alternative Models: What chips are recommended as replacements for SN74HCT574DWR
Model Manufacturer Key Difference
74HC574 Nexperia CMOS input version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1