Opens in a new tab

SN74LS109N

Dual J-K flip-flop, positive-edge, preset/clear, LS TTL, PDIP-16

3000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS109N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LS109N from Texas Instruments contains two independent J-K positive-edge-triggered flip-flops with complementary outputs, preset and clear — the positive-edge version of the 7476 in a 16-pin PDIP package.

Key Specifications

Number of Flip-Flops 2 (dual, independent)
Logic Family LS (Low-power Schottky)
Trigger Type Positive-edge (rising edge of CLK)
Supply Voltage 4.75V to 5.25V
Max Clock Frequency 25MHz typical
Preset (PRE) Active-LOW (asynchronous, sets Q=1)
Clear (CLR) Active-LOW (asynchronous, sets Q=0)
Propagation Delay 16ns typical (CLK to Q)
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Dual J-K positive-edge-triggered flip-flops
  • Active-LOW preset and clear (asynchronous)
  • Complementary outputs (Q and NOT-Q)
  • Toggle mode: J=1,K=1
  • Same pinout as SN74LS73N but with preset

Applications

  • Synchronous counters
  • Toggle flip-flops / frequency dividers
  • Control logic
  • Data registers
Product Introduction: SN74LS109N Product Introduction

The SN74LS109N from Texas Instruments contains two independent J-K positive-edge-triggered flip-flops with direct preset (PRE, active-LOW) and clear (CLR, active-LOW). It combines the J-K functionality of the 7476 with the positive-edge triggering of the 7474 D flip-flop. On each rising clock edge, the Q output is updated based on the J and K inputs: J=0,K=0 → hold; J=1,K=0 → set (Q=1); J=0,K=1 → reset (Q=0); J=1,K=1 → toggle. The positive-edge triggering makes the 74109 compatible with synchronous counter designs where all flip-flops share a common clock and update simultaneously — unlike the 7476’s negative-edge triggering which can cause ripple delays in synchronous systems. The active-LOW preset and clear override the clocked operation. The 74109 is the preferred J-K flip-flop for synchronous counter design because the positive-edge triggering aligns with the standard clock convention. The N suffix denotes the PDIP-16 through-hole package.

Working Principle: SN74LS109N Working Principle

Each J-K flip-flop in the SN74LS109N captures the J and K input states on the rising edge of CLK and updates Q accordingly. Truth table (on rising CLK edge): J=0,K=0 → Q holds; J=1,K=0 → Q=1 (set); J=0,K=1 → Q=0 (reset); J=1,K=1 → Q toggles. The asynchronous inputs override: PRE=LOW forces Q=1; CLR=LOW forces Q=0. For normal operation, PRE and CLR must both be HIGH. The positive-edge triggering means all flip-flops in a synchronous system update at the same time when they share a common clock — critical for synchronous counter design where ripple delays would cause incorrect operation. For a synchronous 2-bit counter: both 74109 flip-flops share the same CLK; FF1 J=K=1 (always toggle); FF2 J=K=Q1 (toggle only when Q1=1); both update simultaneously on each clock edge, counting 00→01→10→11→00. This avoids the ripple delay of cascaded negative-edge counters (like 7476).

Pin Description: SN74LS109N Pin Definition and Functions
Pin Name Type Description
1 1CLR Input Flip-flop 1 clear (active LOW)
2 1J Input Flip-flop 1 J input
3 1K Input Flip-flop 1 K input (K̄ in some sources)
4 1CLK Input Flip-flop 1 clock (positive edge)
5 1PRE Input Flip-flop 1 preset (active LOW)
6 1Q Output Flip-flop 1 Q output
7 1NOT-Q Output Flip-flop 1 complementary output
8 GND Power Ground
9 2NOT-Q Output Flip-flop 2 complementary output
10 2Q Output Flip-flop 2 Q output
11 2PRE Input Flip-flop 2 preset (active LOW)
12 2CLK Input Flip-flop 2 clock (positive edge)
13 2K Input Flip-flop 2 K input
14 2J Input Flip-flop 2 J input
15 2CLR Input Flip-flop 2 clear (active LOW)
16 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS109N used
  • Synchronous 2-Bit Counter: Shared CLK; FF1: J=K=1; FF2: J=K=Q1; both update simultaneously; counts 00→01→10→11→00
  • Toggle / ÷2: J=K=1 (tied HIGH); clock on CLK; Q toggles each rising edge
  • Controlled Toggle: J=enable, K=enable; enable=HIGH → toggle; enable=LOW → hold
  • D Flip-Flop Substitute: J=data, K=NOT-data (via inverter); Q = data on rising CLK edge
Alternative Models: What chips are recommended as replacements for SN74LS109N
Model Manufacturer Key Difference Package Supply
74LS109N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS109D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC109D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC109N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT109D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT109N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in

The 74109 is a Dual J-K Positive-Edge-Triggered Flip-Flop. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1