Opens in a new tab

SN74LS173N

4-bit D register, 3-state, dual data/output enable, async clear, LS TTL, PDIP-16

3000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS173N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LS173N from Texas Instruments is a 4-bit D-type register with 3-state outputs and dual input/output enable controls — the TTL equivalent of the CD4076 for bus-oriented register applications in a 16-pin PDIP package.

Key Specifications

Function 4-bit D-type register with 3-state outputs
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Register Bits 4
Clock Positive edge triggered
Data Enable G1̄, G2̄ (both LOW = data enabled; any HIGH = register holds)
Output Enable OE1̄, OE2̄ (both LOW = outputs active; any HIGH = high-Z)
Clear Asynchronous, active-HIGH (CLR)
Propagation Delay 20-30ns typical
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • 4-bit edge-triggered D register
  • 3-state outputs for bus connection
  • Dual data enable (G1̄, G2̄) — hold when disabled
  • Dual output enable (OE1̄, OE2̄) — high-Z when disabled
  • Asynchronous clear

Applications

  • Bus registers in microprocessor systems
  • I/O port registers
  • Multi-master bus isolation
  • Data buffering
Product Introduction: SN74LS173N Product Introduction

The SN74LS173N from Texas Instruments is a 4-bit positive-edge-triggered D register with 3-state outputs and separate input/output enable controls. It captures 4 bits of data on the rising clock edge and holds them until the next qualified clock. The data enable inputs (G1̄, G2̄, both active-LOW) control whether new data is loaded: when both are LOW, D0-D3 are loaded on the next rising CLK edge; when either is HIGH, the register holds its current value (ignoring D inputs and clock). This is different from the CD4076 which forces inputs to zero when disabled — the 74173 holds its value instead, which is usually more useful. The output enable inputs (OE1̄, OE2̄, both active-LOW) control the 3-state outputs: when both are LOW, Q0-Q3 drive the bus; when either is HIGH, Q0-Q3 go to high-impedance. The asynchronous clear (CLR=HIGH) resets all bits to 0. The 74173 is the standard TTL bus register for microprocessor systems where multiple registers share a common data bus. The N suffix denotes the PDIP-16 package.

Working Principle: SN74LS173N Working Principle

The SN74LS173N captures data on the rising edge of CLK, subject to the data enable inputs. When both G1̄ and G2̄ are LOW (data enabled): on the rising CLK edge, D0-D3 are stored in the flip-flops and appear on Q0-Q3 (if outputs are enabled). When either G1̄ or G2̄ is HIGH (data disabled): the register holds its current value on the next clock edge; D inputs are ignored. This ‘hold’ behavior is achieved by feeding the current Q output back to the D input when the enable is inactive. Output control: when both OE1̄ and OE2̄ are LOW, Q0-Q3 drive the bus (active). When either OE1̄ or OE2̄ is HIGH, Q0-Q3 go to high-impedance (disconnected). For multi-register bus systems: a 2-to-4 decoder drives the OE inputs of four 74173 registers; only one register’s outputs are enabled at a time; the selected register drives the shared bus. Clear: CLR=HIGH asynchronously resets all bits to 0, overriding clock and data inputs. Data enable can be used as a clock enable: tie G1̄ to an enable signal; G2̄ to LOW; the register only loads new data when the enable is active.

Pin Description: SN74LS173N Pin Definition and Functions
Pin Name Type Description
1 OE1̄ Input Output enable 1 (active-LOW; HIGH = high-Z)
2 Q0 Output Register output bit 0 (3-state)
3 Q1 Output Register output bit 1 (3-state)
4 Q2 Output Register output bit 2 (3-state)
5 Q3 Output Register output bit 3 (3-state)
6 GND Power Ground
7 OE2̄ Input Output enable 2 (active-LOW; HIGH = high-Z)
8 G2̄ Input Data enable 2 (active-LOW; HIGH = hold)
9 G1̄ Input Data enable 1 (active-LOW; HIGH = hold)
10 D3 Input Register data input bit 3
11 D2 Input Register data input bit 2
12 D1 Input Register data input bit 1
13 D0 Input Register data input bit 0
14 CLR Input Asynchronous clear (active-HIGH)
15 CLK Input Clock (positive edge)
16 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS173N used
  • Multi-Register Bus: Four 74173s share output bus; 2-to-4 decoder drives OE inputs; each register captures data from same input bus at different times; selected register drives output bus
  • Clock-Enabled Register: G1̄ = clock enable; G2̄ = LOW; register loads data only when enable active; holds when enable inactive
  • Output Port: MCU data bus → D0-D3; MCU write strobe → CLK; MCU address decode → OE1̄; register holds output data; drives peripheral bus
  • Input Port: Peripheral data → D0-D3; MCU read strobe → CLK (via address decode); OE enables bus drive; register buffers input to MCU bus
Alternative Models: What chips are recommended as replacements for SN74LS173N
Model Manufacturer Key Difference Package Supply
74LS173N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS173D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC173D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC173N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT173D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT173N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in

The 74173 is a 4-Bit D-Type Register with 3-State Output. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1