Opens in a new tab

SN74LS20N

Dual 4-input NAND gate, LS TTL, PDIP-14

5000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS20N

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LS20N from Texas Instruments contains two independent 4-input NAND gates in a 14-pin PDIP package — essential for decoding and multi-condition gating where all four conditions must be met.

Key Specifications

Number of Gates 2 (dual 4-input NAND)
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Propagation Delay 10-15ns typical
Output Drive IOL = 8mA, IOH = -0.4mA
Operating Temperature 0°C to +70°C
Package PDIP-14 (19.3 x 6.35mm)

Features

  • Dual 4-input NAND gates
  • Output LOW only when ALL four inputs are HIGH
  • Active-LOW output enables multi-condition decoding
  • 10-15ns propagation delay

Applications

  • Address decoding (4 conditions → 1 chip select)
  • Multi-condition gating
  • Control logic
  • General TTL logic
Product Introduction: SN74LS20N Product Introduction

The SN74LS20N from Texas Instruments contains two independent 4-input NAND gates. Each gate implements Y = NOT(A AND B AND C AND D); the output goes LOW only when all four inputs are HIGH. This is the 4-input extension of the 2-input NAND (7400) and is critical for address decoding and multi-condition logic. In address decoding, the 4-input NAND can decode a specific 4-bit address pattern: connect the 4 address lines (or their complements) so that the NAND output goes LOW only for the target address. For example, to decode address 1011: connect A3 (direct), A2 (inverted), A1 (direct), A0 (direct) to the NAND inputs; the output goes LOW only when A3=1, A2=0, A1=1, A0=1. The 4-input NAND provides 16 possible input combinations; only one produces a LOW output. The N suffix denotes the PDIP-14 through-hole package.

Working Principle: SN74LS20N Working Principle

Each 4-input NAND gate in the SN74LS20N performs Y = (A·B·C·D)’. The output is LOW only when all four inputs A, B, C, and D are simultaneously HIGH. For any other combination (at least one input LOW), the output is HIGH. The 4-input NAND is essentially an AND function followed by inversion, but implemented as a single gate for lower delay. By DeMorgan’s theorem: Y = A’ + B’ + C’ + D’ (OR of complements). This means the NAND output is HIGH if ANY input is LOW — making it useful as an ‘any-inactive’ detector. For address decoding: connect address lines (direct or inverted) so that the target address presents all HIGH inputs; the NAND output goes LOW, selecting the target device. For multi-condition gating: all four conditions must be active (HIGH) for the output to go LOW (active); any inactive condition forces the output HIGH. Unused inputs on a 4-input NAND should be tied HIGH (VCC) to not affect the logic; tying them LOW would force the output permanently HIGH.

Pin Description: SN74LS20N Pin Definition and Functions
Pin Name Type Description
1 1A Input Gate 1 input A
2 1B Input Gate 1 input B
3 NC — No connection
4 1C Input Gate 1 input C
5 1D Input Gate 1 input D
6 1Y Output Gate 1 output
7 GND Power Ground
8 2Y Output Gate 2 output
9 2A Input Gate 2 input A
10 2B Input Gate 2 input B
11 NC — No connection
12 2C Input Gate 2 input C
13 2D Input Gate 2 input D
14 VCC Power Supply (5V)

SN74LS20N uses the PDIP-14 package with standard 74LS TTL pinout: VCC at Pin 14, GND at Pin 7. Each NAND gate has four inputs and one open-collector output — Gate 1: Pins 1-4 (inputs), Pin 6 (output); Gate 2: Pins 9-12 (inputs), Pin 8 (output). Pins 5 and 13 are not connected. The LS technology provides typical propagation delay of 15ns. The open-collector outputs allow wired-AND connections and level shifting to higher voltages. For push-pull active pull-up outputs, use SN74HC20N or SN74HCT20N which maintain the same pinout. The 5400 military-grade variant offers -55°C to +125°C operation.

Application Scenarios: In which products and applications is SN74LS20N used
  • 4-Bit Address Decode: 4 address lines (with inverters as needed) → A,B,C,D; Y goes LOW only for target address; Y → chip select (active-LOW)
  • Multi-Condition Enable: 4 enable conditions → A,B,C,D; Y = LOW only when ALL enables are active; any condition missing = Y HIGH
  • 2-to-4 Line Decoder: 2 address lines and their complements → two NAND gates; Y1 decodes address 00, Y2 decodes address 11; partial decoding
  • Combined with 7410: 7420 (4-input) + 7410 (3-input) NAND gates create complex decode logic for multi-bit addresses
Alternative Models: What chips are recommended as replacements for SN74LS20N
Model Manufacturer Key Difference Package Supply
74LS20N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-14 5V TTL
74LS20D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-14 5V TTL
74HC20D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-14 2-6V CMOS
74HC20N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-14 2-6V CMOS
74HCT20D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-14 4.5-5.5V TTL-in
74HCT20N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-14 4.5-5.5V TTL-in
74AC20D TI/Nexperia Advanced CMOS with 2-6V supply and higher output drive current (24mA vs 6mA for HC) SOIC-14 2-6V CMOS
74AC20N TI/Nexperia Through-hole DIP version of AC family for prototyping and repair DIP-14 2-6V CMOS
74LVC20D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-14 1.65-3.6V CMOS
74LVC20N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-14 1.65-3.6V CMOS

The 7420 is a Dual 4-Input NAND Gate. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1