Opens in a new tab

Home » Integrated Circuits ICs » SN74LS245N

SN74LS245N

Octal bus transceiver, 3-state, DIR control, LS-TTL, PDIP-20

14799

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS245N

Package:

PDIP-20 (24.3 x 6.35 mm, 2.54mm pitch)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS245N from Texas Instruments is an octal bus transceiver with 3-state outputs and direction control, designed for asynchronous two-way communication between data buses.

Key Specifications

Manufacturer Texas Instruments
Bits 8 (octal)
Direction Control DIR pin
Output Enable Active low (OE)
Propagation Delay 12 ns typical
Supply Voltage 4.75V to 5.25V
Output Current 24 mA sink
Technology 74LS (Low-power Schottky)
Package PDIP-20
Operating Temperature 0°C to +70°C

Features

  • Octal bidirectional bus transceiver
  • 3-state outputs
  • Direction control (DIR)
  • Output enable (active low)
  • Non-inverting data path
  • Standard LS-TTL logic levels

Applications

  • Microprocessor bus interface
  • Memory bank switching
  • Data bus buffering
  • Board-level bus isolation
Product Introduction: SN74LS245N Product Introduction

The SN74LS245N from Texas Instruments is an octal bidirectional bus transceiver with 3-state outputs, designed for interfacing two data buses. The DIR pin controls data flow direction, while the active-low OE pin enables or disables all outputs. The non-inverting data path makes it ideal for buffering microprocessor buses, memory interfaces, and I/O port expansion in 5V TTL systems.

Working Principle: SN74LS245N Working Principle

The 74LS245 contains eight bidirectional transceiver elements. When OE is LOW and DIR is HIGH, data flows from A to B. When OE is LOW and DIR is LOW, data flows from B to A. When OE is HIGH, both A and B outputs are in high-impedance state, effectively disconnecting the two buses. The LS-TTL Schottky-clamped design provides fast switching with moderate power consumption.

Pin Description: SN74LS245N Pin Definition and Functions
Pin Group Name Function
1 DIR Direction control
2-9 A1-A8 Bus A I/O
10 GND Ground
11-18 B8-B1 Bus B I/O
19 OE Output enable (active low)
20 VCC 5V supply
Application Scenarios: In which products and applications is SN74LS245N used
  • Microprocessor data bus buffering
  • Memory interface transceivers
  • I/O expansion board isolation
  • Multi-master bus arbitration
Alternative Models: What chips are recommended as replacements for SN74LS245N
Manufacturer Part Number Notes
TI SN74HC245N CMOS version (2-6V)
TI SN74LVC245AN 3.3V CMOS version
Nexperia 74HC245D SOIC version

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1