Opens in a new tab

Home » Integrated Circuits ICs, Video ICs » SN74LVC1G123DBVR

SN74LVC1G123DBVR

Single retriggerable monostable multivibrator, Schmitt-trigger, SOT-23-8

15000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LVC1G123DBVR

Package:

SOT-23-8 (2.9 x 1.6 x 1.45 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LVC1G123DBVR from Texas Instruments is a single retriggerable monostable multivibrator with Schmitt-trigger inputs, 1.65V-5.5V operation, and programmable pulse width in SOT-23-8 package.

Key Specifications

Channels 1
Supply Voltage 1.65 V to 5.5 V
Propagation Delay (tpd) 8 ns max @ 3.3V
Output Drive Current 32 mA (sink/source)
Input Type Schmitt-Trigger on A-bar and B
Output Type Push-Pull (Q and Q-bar)
Supply Current (ICC) 20 uA max
Trigger Modes Rising edge on B, falling edge on A-bar, or CLR high
Retriggerable Yes (up to 100% duty cycle)
Overriding Clear Yes (active low CLR terminates pulse)
IOff Support Yes (partial power-down, live insertion)
Package SOT-23-8 (DBV suffix)
Operating Temperature -40 to +125 C

Features

  • Schmitt-trigger inputs for slow edge tolerance
  • Three trigger methods: A-bar low + B rising, B high + A-bar falling, CLR high
  • Retriggerable for long pulses up to 100% duty cycle
  • Overriding clear terminates output pulse immediately
  • Glitch-free power-up reset on outputs

Applications

  • Pulse generation and timing delay circuits
  • Debounce and one-shot pulse conditioning
  • Frequency divider and missing pulse detector
  • AV receivers and Blu-ray player timing
  • Industrial control sequential timing
Product Introduction: SN74LVC1G123DBVR Product Introduction

The SN74LVC1G123DBVR from Texas Instruments is a single retriggerable monostable multivibrator with Schmitt-trigger inputs in SOT-23-8 package. The device operates from 1.65V to 5.5V supply and provides programmable output pulse duration via external resistor (REXT) and capacitor (CEXT). Three trigger methods are supported: A-bar low with B rising edge, B high with A-bar falling edge, or CLR going high. The Schmitt-trigger inputs handle slow input transition rates without jitter. The retriggerable feature allows extending the output pulse up to 100% duty cycle. The overriding clear (CLR) input can terminate the output pulse at any time. The DBVR suffix denotes SOT-23-8 package with tape and reel packaging.

Working Principle: SN74LVC1G123DBVR Working Principle

The SN74LVC1G123DBVR operates as a retriggerable monostable (one-shot) multivibrator. (1) In the quiescent state, the Q output is low and Q-bar is high. When a valid trigger event occurs (rising edge on B with A-bar low, or falling edge on A-bar with B high), the output Q goes high for a duration determined by the external timing components. The pulse width is approximately tw = REXT x CEXT x 0.33 (typical). The external capacitor connects between Cext and Rext/Cext pins, and the external resistor connects between Rext/Cext and VCC. (2) The retriggerable feature means that if a new trigger event occurs while the output pulse is still active, the pulse duration is extended from the new trigger point. This allows achieving very long output pulses or even 100% duty cycle by continuously retriggering before the pulse expires. Conversely, taking CLR low immediately terminates the output pulse regardless of the timing, providing an overriding reset function. (3) The Schmitt-trigger inputs on A-bar and B provide hysteresis that eliminates output jitter caused by slow or noisy input edges. This is critical in applications where the trigger signal comes from a mechanical switch (with contact bounce) or a slowly rising signal from an RC network. The IOff circuitry ensures the outputs are high-impedance when VCC is 0V, preventing back-drive damage in hot-swap or partial-power-down applications.

Pin Description: SN74LVC1G123DBVR Pin Definition and Functions
Pin Name Function
1 A-bar Active-low trigger input (Schmitt)
2 B Active-high trigger input (Schmitt)
3 CLR-bar Active-low clear (overrides pulse)
4 GND Ground
5 Q-bar Complementary output
6 Q Normal output (pulse high)
7 Cext External capacitor (positive terminal)
8 Rext/Cext External resistor/capacitor junction
Application Scenarios: In which products and applications is SN74LVC1G123DBVR used
  • Pulse generation and timing delay circuits with programmable width via REXT/CEXT
  • Switch debounce and one-shot pulse conditioning with Schmitt-trigger inputs
  • Frequency divider and missing pulse detector using retriggerable feature
  • AV receivers and Blu-ray player timing control
  • Industrial control sequential timing and watchdog pulse generation
Alternative Models: What chips are recommended as replacements for SN74LVC1G123DBVR
Model Manufacturer Key Difference
74LVC1G123DC-Q100 Nexperia AEC-Q100, VSSOP-8
SN74LVC1G123DCTR TI Same, SSOP-8 package
74LVC1G123GW Nexperia SOT-353-5, smaller package
CD74HC4538EE4 TI Dual monostable, DIP-16
74HC123D Nexperia Dual monostable, SO-16

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1