Opens in a new tab

SN74LVC244ARWPR

8-ch buffer, 3-state, 5.5V input, TSSOP-20

11200

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LVC244ARWPR

Package:

20-Pin TSSOP (6.5 x 4.4 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LVC244ARWPR is a Texas Instruments 8-channel buffer/line driver with 3-state outputs, 1.65-3.6V supply, 5.5V tolerant inputs, and 4.5ns propagation delay. Packaged in TSSOP-20, -40C to +85C.

Key Specifications

Channels 8 (2x 4-bit groups)
Supply 1.65 V to 3.6 V
tpd 4.5 ns max at 3.3V
Input Tolerance Up to 5.5 V
Output 3-state
Package TSSOP-20

Features

  • 8-channel buffer/line driver
  • 3-state outputs per 4-bit group
  • 1.65V to 3.6V supply
  • 5.5V tolerant inputs
  • 4.5ns propagation delay
  • Bus hold on inputs
  • Ioff for partial-power-down

Applications

  • Bus buffer and address driver
  • Level translation
  • Memory interface
  • Peripheral I/O expansion
Product Introduction: SN74LVC244ARWPR Product Introduction

The SN74LVC244ARWPR is a Texas Instruments octal buffer/line driver with 3-state outputs in a 20-pin TSSOP package. The device is organized as two independent 4-bit buffer groups, each with its own output-enable (OE) input, providing flexible bus control. The 1.65V to 3.6V supply range supports 1.8V, 2.5V, and 3.3V logic systems. The 5.5V input tolerance allows direct interfacing with 5V logic devices without level-shifting, making the SN74LVC244A an excellent 5V-to-3.3V level translator. The 4.5ns maximum propagation delay at 3.3V provides high-speed address and data bus driving. The 3-state outputs allow multiple devices to share a common bus without contention, with the OE input controlling the high-impedance state. The bus-hold feature on data inputs eliminates the need for external pull-up or pull-down resistors on floating inputs. The Ioff feature disables the output circuitry during partial power-down, preventing backflow current from damaging the device. The LVC architecture provides low static power consumption. Packaged in TSSOP-20 rated for -40C to +85C.

Working Principle: SN74LVC244ARWPR Working Principle

The SN74LVC244A contains eight non-inverting buffers with 3-state output capability. Each 4-bit group (1Y1-1Y4 and 2Y1-2Y4) shares an active-low output enable (1OE and 2OE). When OE is low, the outputs follow the inputs (Y = A). When OE is high, the outputs are in the high-impedance (Hi-Z) state, effectively disconnecting the buffer from the bus. The 5.5V input tolerance is achieved by using input clamp diodes and high-voltage input transistors that can withstand voltages above VCC. The input stage uses a CMOS inverter with a trip point at approximately VCC/2 for LVC-level switching. The output stage uses a push-pull CMOS driver sized for 24mA drive capability at 3.3V. The bus-hold circuit consists of a weak PMOS pull-up and NMOS pull-down feedback network that holds the input at the last valid logic level when the driving source is disconnected. The Ioff circuit isolates the output transistors when VCC is 0V, preventing parasitic conduction paths.

Pin Description: SN74LVC244ARWPR Pin Definition and Functions
Pin Mnemonic Description
1 1OE Output enable 1 (active low)
2-5,13-16 1A/2A Data inputs
6-9,12,17-20 1Y/2Y Data outputs (3-state)
10 GND Ground
11 2OE Output enable 2 (active low)
Application Scenarios: In which products and applications is SN74LVC244ARWPR used
  • Address bus buffer for memory-mapped peripherals with 3-state control for bus sharing
  • 5V-to-3.3V level translation with 5.5V input tolerance and 4.5ns propagation
  • Memory interface buffer driving capacitive loads with 24mA output current
  • Peripheral I/O expansion with dual 4-bit enable groups for flexible bus routing
Alternative Models: What chips are recommended as replacements for SN74LVC244ARWPR
Model Manufacturer Key Difference
SN74LVC244APWPR TI TSSOP-20, different temp
SN74LVC541APWPR TI Single OE, all 8 bits
74LVC244APW Nexperia Similar function
NC7LV244A onsemi Similar LVC buffer

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1