Product Overview
The SP3232ECY-L/TR from MaxLinear (formerly Sipex/Exar) is a true +3.0V to +5.5V RS-232 transceiver that complies with EIA/TIA-232-F standards. It features 2 drivers and 2 receivers with an integrated high-efficiency charge pump that requires only four 0.1uF external capacitors. The device delivers robust ESD protection of plus/minus 15kV (HBM) and plus/minus 8kV (IEC 61000-4-2 contact discharge), making it highly reliable for industrial and commercial communication interfaces.
Key Specifications
| Supply Voltage | +3.0V to +5.5V |
| Drivers / Receivers | 2 / 2 |
| Data Rate | 120 kbps minimum under full load |
| ESD Rating (HBM) | +/-15kV |
| ESD Rating (IEC Contact) | +/-8kV |
| External Capacitors | 4 x 0.1uF |
| Operating Temperature | 0 to 70°C (ECY suffix) |
| Package | TSSOP-16 |
| Packaging | Tape & Reel |
Features
- True RS-232 performance from a single +3.0V to +5.5V supply
- Integrated charge pump requires only 0.1uF capacitors
- Enhanced ESD protection: +/-15kV HBM, +/-8kV IEC contact
- Operates down to +2.7V supply with RS-232 interoperability
- Low-power shutdown mode (SP3222E variant)
- Meets EIA/TIA-232-F and V.28 standards
- RS-232 serial communication ports in embedded systems
- Industrial automation and process control interfaces
- Portable computing devices and PDAs
- Point-of-sale terminals and payment systems
- Networking and telecom equipment console ports
- RS-232 serial communication in embedded and industrial control systems
- Console and debug ports in networking and telecom equipment
- Point-of-sale terminals and barcode scanner interfaces
- Portable instrumentation requiring low-voltage RS-232 connectivity
- Legacy serial peripheral interfaces in modern 3.3V-only designs
Applications
Product Introduction: SP3232ECY-L/TR Product Introduction
The SP3232ECY-L/TR is an RS-232 transceiver solution from MaxLinear designed for portable and handheld applications. The device integrates a high-efficiency charge pump power supply that requires only 0.1uF capacitors in 3.3V operation, reducing board space and component count. The 2-driver/2-receiver configuration supports full RS-232 serial communication with data rates up to 120 kbps. Enhanced ESD protection exceeding +/-15kV (HBM) ensures robust operation in electrically harsh environments. The TSSOP-16 package provides a compact footprint suitable for space-constrained designs.
Working Principle: SP3232ECY-L/TR Working Principle
The SP3232ECY-L/TR operates by converting TTL/CMOS logic levels to RS-232 compliant voltage levels using an integrated dual charge pump. The first charge pump is a voltage doubler that generates approximately +5.5V from the VCC supply, while the second charge pump is a voltage inverter that generates approximately -5.5V. These boosted voltages power the RS-232 driver outputs, ensuring compliance with EIA/TIA-232-F amplitude requirements even at 3.0V supply. The receivers perform the opposite function, converting RS-232 input levels to TTL/CMOS output levels with approximately 300mV of hysteresis for noise immunity. A 5kOhm pulldown resistor on each receiver input ensures a defined logic high output when the input is floating.
Pin Description: SP3232ECY-L/TR Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | Charge Pump | Voltage doubler capacitor positive terminal |
| 2 | V+ | Output | +5.5V charge pump output |
| 3 | C1- | Charge Pump | Voltage doubler capacitor negative terminal |
| 4 | C2+ | Charge Pump | Voltage inverter capacitor positive terminal |
| 5 | C2- | Charge Pump | Voltage inverter capacitor negative terminal |
| 6 | V- | Output | -5.5V charge pump output |
| 7 | T2OUT | Output | RS-232 Driver 2 output |
| 8 | R2IN | Input | RS-232 Receiver 2 input |
| 9 | R2OUT | Output | TTL/CMOS Receiver 2 output |
| 10 | T2IN | Input | TTL/CMOS Driver 2 input |
| 11 | T1IN | Input | TTL/CMOS Driver 1 input |
| 12 | R1OUT | Output | TTL/CMOS Receiver 1 output |
| 13 | R1IN | Input | RS-232 Receiver 1 input |
| 14 | T1OUT | Output | RS-232 Driver 1 output |
| 15 | GND | Ground | Ground |
| 16 | VCC | Power | +3.0V to +5.5V supply |
Application Scenarios: In which products and applications is SP3232ECY-L/TR used
Alternative Models: What chips are recommended as replacements for SP3232ECY-L/TR
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| TI | MAX3232CWE | SOIC-16 | Pin compatible, 3.0-5.5V, +/-15kV ESD |
| MaxLinear | SP3232EEN-L/TR | SSOP-16 | Same function, SSOP package |
| MaxLinear | SP3232ECT-L/TR | WSOIC-16 | Same function, WSOIC package |
| TI | MAX3232IDR | SOIC-16 | Industry standard 3.3V RS-232 |
| ST | ST3232EBPR | TSSOP-16 | Low power, 3.0-5.5V RS-232 |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






