Opens in a new tab

SPM6530T-2R2M

2.2uH shielded power inductor, 30A Isat, SMD 6.5×6.5mm

10696

Effective Inventory

Image for reference only

Manufacturer Part:

SPM6530T-2R2M

Package:

SMD (6.5×6.5×3.0mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SPM6530T-2R2M from TDK is a 2.2uH shielded SMD power inductor rated at 30A saturation current in a 6.5×6.5mm package for DC-DC converter output filters.

Key Specifications

Package SMD (6.5×6.5×3.0mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: SPM6530T-2R2M Product Introduction

The SPM6530T-2R2M from TDK is a 2.2uH shielded SMD power inductor rated at 30A saturation current in a 6.5×6.5mm package for DC-DC converter output filters.

Working Principle: SPM6530T-2R2M Working Principle

The SPM6530T-2R2M is a 2.2uH shielded power inductor from TDK in a 6.5×6.5×3.0mm SMD package. It uses a metal composite core (soft magnetic powder compacted around the winding), which provides high saturation current and low core losses at switching frequencies from 100kHz to 5MHz. The shielded construction means the magnetic flux is largely contained within the core, minimizing EMI radiation and preventing coupling to nearby traces or components. Key specifications: saturation current Isat = 30A (at which inductance drops 30% from nominal), rated current Irms = 10.5A (at which temperature rise is 40C above ambient), DC resistance DCR = 2.8mOhm typical. The distinction between Isat and Irms is critical: Isat defines the magnetic limit (core saturation), while Irms defines the thermal limit (copper heating). In a buck converter, the peak inductor current must stay below Isat, and the RMS current below Irms. The 2.2uH inductance at 500kHz switching frequency with 12V input and 3.3V output results in approximately 3.2A peak-to-peak ripple current at 10A load. The metal composite core has lower core loss than ferrite at high frequencies (above 1MHz), making it suitable for modern high-frequency DC-DC converters. The SPM6530 series footprint is compatible with other 6.5×6.5mm inductors. The -2R2M suffix specifies 2.2uH, +/-20% tolerance.

Pin Description: SPM6530T-2R2M Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Power Winding start (connects to switching node)
2 Terminal 2 Power Winding end (connects to output or input)
Application Scenarios: In which products and applications is SPM6530T-2R2M used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for SPM6530T-2R2M
    Manufacturer Part Number Package Notes
    TDK SLF7045T-2R2M1R3 7.0×4.5mm 2.2uH, 1.3A, shielded, similar
    Wurth 74404022200 6.0×6.0mm 2.2uH, 20A Isat, shielded power
    Bourns SRR1260-2R2M 12.5×6.0mm 2.2uH, 20A, shielded, higher current
    Coilcraft XAL6060-222ME 6.0×6.0mm 2.2uH, 22A Isat, shielded
    Murata 1277AS-H-2R2M 6.5×6.5mm 2.2uH, 30A, shielded, same size

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1