Opens in a new tab

ST25R3916-AQWT

NFC universal device, EMVCo 3.0, >1.6W RF power, AAT, card emulation, 32-pin VFQFPN, -40 to +105C

12622

Effective Inventory

Image for reference only

Manufacturer Part:

ST25R3916-AQWT

Package:

32-pin VFQFPN (5 x 5 x 1.0 mm, wettable flanks)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ST25R3916-AQWT is a high-performance NFC universal device from STMicroelectronics, supporting NFC initiator, target, reader, and card emulation modes. Fully EMVCo 3.0 compliant, it integrates an advanced analog front end with high RF output power (>1.6W) for direct antenna driving. The -AQWT package is a 32-pin VFQFPN (5x5mm) with wettable flanks. It supports ISO 14443A/B, ISO 15693, FeliCa, and NFC peer-to-peer, with features like automatic antenna tuning (AAT) and noise suppression receiver (NSR).

Key Specifications

Operating Modes Reader/Writer, Card Emulation, Active/Passive P2P
NFC Protocols NFC-A/B/F/V, ISO 14443A/B, ISO 15693, FeliCa
Data Rates Up to 848 kbit/s (NFC-A/B), 424 kbit/s (NFC-F)
EMVCo 3.0 compliant (analog and digital)
RF Output Power >1.6W (differential antenna)
Antenna Tuning Automatic (AAT) via variable capacitor
Card Detection Capacitive and inductive sensors
Communication Interface SPI (10 Mbit/s), I2C (3.4 Mbit/s HS mode)
FIFO 512 bytes
Supply Voltage 2.4V to 5.5V
Package 32-pin VFQFPN (5x5x1 mm, wettable flanks)
Operating Temperature -40C to +105C
Part Status NRND

Features

  • High RF output power (>1.6W) for excellent read range without external amplifier
  • EMVCo 3.0 analog and digital compliance for POS terminal certification
  • Automatic antenna tuning (AAT) compensates for environmental detuning
  • Noise suppression receiver (NSR) for operation near noisy LCD displays
  • Active wave shaping (AWS) reduces RF overshoot for easier compliance
  • Low power capacitive and inductive card detection wake-up
  • NFC card emulation and active P2P for device pairing

Applications

  • EMVCo 3.0 contactless payment terminals
  • NFC reader for consumer and industrial devices
  • Device pairing and authentication
  • Wireless charging protection (Qi NFC)
  • Access control and e-government ID readers
Product Introduction: ST25R3916-AQWT Product Introduction

The ST25R3916-AQWT is a high-performance NFC universal device from STMicroelectronics, supporting all four NFC operating modes (reader, writer, card emulation, peer-to-peer) with full EMVCo 3.0 compliance. Its high RF output power (>1.6W) enables direct antenna driving without external amplifiers, while automatic antenna tuning (AAT) compensates for environmental changes. The noise suppression receiver (NSR) and active wave shaping (AWS) simplify regulatory compliance. Packaged in a 32-pin VFQFPN with wettable flanks, it operates from -40C to +105C.

Working Principle: ST25R3916-AQWT Working Principle

The ST25R3916-AQWT operates as a multi-mode NFC transceiver. In reader mode, the transmitter generates a 13.56MHz carrier via an integrated power amplifier that drives the antenna directly, producing >1.6W differential output. The ASK modulation depth is programmable from 5% to 40% via digital control. The receiver chain includes AM/PM and I/Q demodulators with automatic channel selection or baseband summation, followed by automatic gain control (AGC) and a noise suppression receiver (NSR) that rejects out-of-band interference. Active wave shaping (AWS) controls the transmitter output transition edges to minimize overshoot and undershoot. Automatic antenna tuning (AAT) uses integrated variable capacitors to maintain resonance at 13.56MHz even when the antenna environment changes (e.g., metal proximity). For card emulation mode, the device modulates the external reader field using a load modulation circuit. Low-power card detection uses capacitive and inductive sensors to detect card presence without activating the reader field, consuming minimal current. The 512-byte FIFO buffers data between the host MCU (via SPI or I2C) and the NFC protocol engine.

Pin Description: ST25R3916-AQWT Pin Definition and Functions
Pin Group Name Type Function
Power TVDD, AVDD, DVDD, PVDD Power Transmitter 5V, Analog 3.3V, Digital 3.3V, Peripheral 1.65-5.5V
Antenna ANT1, ANT2, ANTX1, ANTX2 Analog Differential antenna connection and transmit outputs
SPI SDI, SDO, SCK, CSN Digital SPI interface (up to 10 Mbit/s)
I2C SDA, SCL Digital I2C interface (up to 3.4 Mbit/s HS mode)
Interrupt IRQ Output Host interrupt (active low)
Crystal XTAL1, XTAL2 Analog 27.12 MHz crystal oscillator
AAT AAT1, AAT2 Analog Automatic antenna tuning capacitor outputs
Application Scenarios: In which products and applications is ST25R3916-AQWT used
Application Circuit Role Key Requirement
POS Terminal Contactless payment reader EMVCo 3.0, >1.6W, AAT, NSR
NFC Pairing Bluetooth/WiFi pairing aid P2P mode, card emulation, 512B FIFO
Access Control Smart card reader ISO 14443A/B, high power, -40~105C
Qi Protection NFC wireless charging auth Card emulation, low power detect
Industrial Tag Asset tracking reader ISO 15693, AAT, long range
Alternative Models: What chips are recommended as replacements for ST25R3916-AQWT
Model Manufacturer Key Difference
ST25R3916B-AQWT STMicroelectronics Updated revision (B), improved AWS
ST25R3917-AQWT STMicroelectronics Reduced feature set, no card emulation, no AAT
PN5180A0HN/C2 NXP NFC frontend, EMVCo 3.0, different interface
PN7150B0HN/C11002 NXP NFC controller with integrated firmware
TRF7970ARHBR TI NFC/RFID transceiver, 13.56MHz, 32-VQFN

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMC7101AIM5X/NOPB

Single CMOS RRIO op-amp, 1.4MHz, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 11389pcs

Cargo cycle: 3-7 Days

The minimum order is 1