Opens in a new tab

STCS1PUR

1.5A constant current LED driver, 4.5-40V, PWM dimming, DFN-8 3x3mm

4046

Effective Inventory

Image for reference only

Manufacturer Part:

STCS1PUR

Package:

DFN-8 (3.0 x 3.0 x 0.88 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STCS1PUR from STMicroelectronics is a 1.5A BiCMOS constant current LED driver in a DFN-8 (3x3mm) package. With 4.5-40V input range, 100mV feedback reference voltage, PWM dimming input, and LED disconnection diagnostic, it provides a precise and integrated solution for driving high-brightness LEDs.

Key Specifications

Topology Linear Constant Current Source
Input Voltage 4.5V to 40V
Output Current Up to 1.5A
Current Accuracy +/-10%
Feedback Voltage 100 mV
Voltage Overhead <0.5V
PWM Dimming Frequency DC to 50 kHz
Shutdown Current <1 uA
Quiescent Current 450 uA (typ)
Operating Temperature -40 to +150 C
Package DFN-8 (3 x 3 x 0.88 mm)

Features

  • 1.5A maximum output current
  • 100mV feedback voltage for low power dissipation
  • Current set by single external resistor
  • PWM dimming input up to 50kHz
  • Shutdown pin with <1uA current
  • LED disconnection diagnostic output
  • Less than 0.5V voltage overhead
  • 4.5V to 40V input voltage range

Applications

  • Low-voltage LED lighting (5V/12V/24V)
  • Automotive interior and exterior lighting
  • General LED illumination
  • Display backlighting
Product Introduction: STCS1PUR Product Introduction

The STCS1PUR from STMicroelectronics is a BiCMOS constant current LED driver that replaces discrete component solutions for driving LEDs from low-voltage sources (5V, 12V, or 24V). The PUR suffix denotes the DFN-8 3x3mm package with tape and reel packaging. Current is set by a single external sense resistor (RF = 100mV / ILED) with +/-10% accuracy. The 100mV feedback voltage minimizes power dissipation in the sense resistor. Features include PWM dimming up to 50kHz, shutdown with less than 1uA current, and an open-drain diagnostic output that detects LED string disconnection.

Working Principle: STCS1PUR Working Principle

The STCS1 operates through four subsystems: (1) Current Regulation: An internal MOSFET pass element regulates LED current by comparing the voltage across the external sense resistor (connected to FB pin) against a precision 100mV internal reference. The resulting current is ILED = 100mV / RF with +/-10% accuracy. (2) PWM Dimming: The PWM pin directly controls the main pass switch. When PWM is high, current flows to LEDs. When low, the switch opens. The 4us rise/fall time supports dimming up to 50kHz. The internal bias remains active during PWM off-time for fast response. (3) Diagnostic: When enabled, the DISC pin monitors the DRAIN voltage. If below 75mV (indicating LED string open), DISC pulls low to alert the system. (4) Thermal Management: The DFN-8 exposed pad provides 38 C/W RthJA, allowing up to 2W dissipation at 50C ambient.

Pin Description: STCS1PUR Pin Definition and Functions
Pin Name Type Description
1 VCC Power Supply voltage (4.5-40V)
2 DRAIN Output Internal MOSFET drain (connect to LED cathode)
3 DISC Output Diagnostic output (open-drain, low = LED disconnected)
4 FB Input Feedback / current sense (connect sense resistor to GND)
5 GND Power Ground
6 EN Input Enable (high = on, low = shutdown <1uA)
7 PWM Input PWM dimming input (high = LED on)
8 Pad Thermal Exposed thermal pad (connect to GND)
Application Scenarios: In which products and applications is STCS1PUR used
  • 12V automotive LED lighting with 1.5A constant current and PWM dimming
  • 24V industrial LED illumination with LED disconnect diagnostic feedback
  • 5V USB-powered LED strips with 100mV low-dissipation current sensing
  • RGB LED driver stages with 50kHz PWM dimming for color mixing
Alternative Models: What chips are recommended as replacements for STCS1PUR
Model Manufacturer Iout Vin Notes
STCS1PHR ST 1.5A 4.5-40V PowerSO-8 package
AL8805WTTR Diodes Inc 1A 6-30V Buck LED driver
PT4115E89E Microchip 1.2A 8-30V Buck LED driver
TLC5940NT TI 60mA/ch 3-5.5V 16-ch PWM LED driver

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1