Opens in a new tab

STF26NM60N

N-CH 600V MDmesh II MOSFET, 20A, 135mΩ Ron, 60nC Qg, avalanche rated, TO-220FP insulated

3200

Effective Inventory

Image for reference only

Manufacturer Part:

STF26NM60N

Package:

TO-220FP (insulated)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STF26NM60N from STMicroelectronics is an N-channel 600V MDmesh II power MOSFET with 135 mΩ typical on-resistance and 20A drain current in a TO-220FP package. Using second-generation MDmesh strip-layout technology, it delivers low gate charge and excellent avalanche capability for high-efficiency switching power converters.

Key Specifications

  • Channel Type: N-Channel
  • VDS: 600V
  • VGS: ±30V
  • ID: 20A (TC=25°C), 12.6A (TC=100°C)
  • IDM: 80A (pulsed)
  • RDS(on): 135 mΩ typ, 165 mΩ max @ VGS=10V, ID=10A
  • VGS(th): 2V ~ 4V (ID=250µA)
  • Qg: 60 nC typ @ VDD=480V, ID=20A, VGS=10V
  • Qgd: 30 nC typ
  • Ciss: 1800 pF
  • Coss: 115 pF
  • Crss: 1.1 pF
  • EAS: 610 mJ (single pulse avalanche)
  • PTOT: 35W (TC=25°C)
  • Rth(j-c): 3.6°C/W
  • VISO: 2500V RMS (insulated package)
  • Operating Temperature: -55°C ~ 150°C
  • Package: TO-220FP (insulated)

Features

  • MDmesh II second-generation strip-layout technology
  • 100% avalanche tested for robustness
  • Low gate charge for efficient high-frequency switching
  • Low input capacitance and Crss for fast transitions
  • Insulated TO-220FP package (2500V RMS isolation)
  • Internal gate resistance of 2.8 Ω for EMI control

Applications

  • Switch-mode power supplies (SMPS)
  • Power factor correction (PFC) stages
  • Motor drive inverters
  • Lighting ballasts
  • Induction heating
Product Introduction: STF26NM60N Product Introduction

The STF26NM60N from STMicroelectronics is a high-voltage N-channel power MOSFET built on the second-generation MDmesh technology platform. The MDmesh (Multiple Drain mesh) architecture uses a vertical stripe layout where the source and body regions are arranged as narrow stripes, dramatically reducing the gate-drain charge (Qgd = 30 nC) while maintaining low on-resistance (135 mΩ typical). This makes the device particularly efficient in hard-switching applications such as PFC stages and half-bridge converters where switching losses dominate. The TO-220FP package provides 2500V RMS insulation from all leads to the heat sink, eliminating the need for external insulating washers and simplifying assembly. The 610 mJ avalanche energy rating ensures robustness during unclamped inductive switching events.

Working Principle: STF26NM60N Working Principle

The STF26NM60N uses STMicroelectronics’ MDmesh II technology where multiple vertical PN junctions (drain-body diodes) are formed in parallel using a stripe layout. During off-state, these PN junctions support the high drain voltage. During turn-on, the gate signal creates an inversion layer under each stripe, forming parallel conduction channels. The stripe geometry reduces the gate-drain overlap area, resulting in the low 30 nC gate-drain charge that minimizes switching losses during the Miller plateau region. The 1.1 pF reverse transfer capacitance (Crss) is exceptionally low for a 600V device, reducing the dv/dt coupling between drain and gate that can cause parasitic turn-on in bridge configurations. The integrated Zener diode between gate and source provides ESD protection during handling.

Pin Description: STF26NM60N Pin Definition and Functions
Pin Name Function
1 Gate Gate terminal (drive with 10-15V for lowest RDS(on))
2 Drain Drain terminal (tab is drain, internally connected)
3 Source Source terminal
Tab Drain Drain tab (insulated from heat sink mounting surface)
Application Scenarios: In which products and applications is STF26NM60N used

The STF26NM60N is commonly used in the primary side of offline SMPS where the 600V rating provides margin for 230VAC rectified mains (325VDC peak plus transient overshoot). In PFC boost converters, the low Qgd (30 nC) minimizes switching losses at switching frequencies of 65-100 kHz. For motor drive inverters, the insulated TO-220FP package simplifies heat sink mounting without external insulators. In induction heating, the 610 mJ avalanche rating provides robustness against the high-energy voltage spikes generated by the resonant tank circuit. The 135 mΩ RDS(on) makes it suitable for output power levels up to 300W in half-bridge configurations.

Alternative Models: What chips are recommended as replacements for STF26NM60N
Model Manufacturer Key Difference
STF26N60M2 STMicroelectronics MDmesh M2, lower Qg (34nC), same package
IRFB20N60K Infineon 600V, 20A, 190mΩ, TO-220
FCH26N60N onsemi 600V, 26A, 120mΩ, TO-247

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1