Product Overview
The STF701-LF-T7 is an EMI filter with integrated TVS diode array from Protek Devices, designed for EMI filtering and ESD protection of high-speed signal lines. This T-filter configuration provides both common-mode and differential-mode noise filtering along with IEC 61000-4-2 compliant ESD protection (15kV air discharge, 8kV contact discharge). The LF-T7 suffix denotes lead-free construction in a SOT-23-6 package, suitable for protecting USB, HDMI, and other high-speed interface lines.
Key Specifications
| Filter Configuration | T-Filter (series inductor + shunt TVS) |
| ESD Protection (Air) | ±15 kV (IEC 61000-4-2) |
| ESD Protection (Contact) | ±8 kV (IEC 61000-4-2) |
| Clamping Voltage | 12 V (Typ) @ Ipp=1A |
| Capacitance | 10 pF (Typ) per line |
| Channel Count | 1 |
| Package | SOT-23-6 |
| Operating Temperature | -55°C to +150°C |
| Lead-Free | Yes (LF suffix) |
Features
- Integrated T-filter with TVS diode for combined EMI/ESD protection
- Low capacitance of 10pF per line for high-speed signal compatibility
- Compact SOT-23-6 package for space-constrained designs
- Lead-free construction meeting RoHS requirements
- Bidirectional TVS protection for AC signal compatibility
- USB 2.0/3.0 port ESD protection and EMI filtering
- HDMI and DisplayPort interface protection
- Mobile phone connector ESD/EMI protection
- LAN and Ethernet port surge protection
- Consumer electronics external interface protection
- USB 2.0/3.0 data line ESD protection and EMI filtering
- HDMI and DisplayPort interface transient protection
- Mobile device connector ESD/EMI suppression
- Ethernet PHY MDI interface protection
- Consumer electronics external port protection
Applications
Product Introduction: STF701-LF-T7 Product Introduction
The Protek Devices STF701-LF-T7 is an integrated EMI filter and TVS (Transient Voltage Suppressor) diode array designed to protect high-speed signal lines from both electromagnetic interference and electrostatic discharge events. The T-filter topology combines series impedance elements (inductors/resistors) with shunt TVS diodes to attenuate high-frequency noise while simultaneously clamping transient voltage spikes. The device provides IEC 61000-4-2 Level 4 ESD protection capable of withstanding ±15kV air discharge and ±8kV contact discharge. With a low 10pF typical capacitance per line, the STF701 maintains signal integrity on high-speed interfaces up to several hundred MHz. The LF suffix confirms lead-free RoHS-compliant construction, and the T7 suffix specifies the SOT-23-6 package configuration.
Working Principle: STF701-LF-T7 Working Principle
The STF701-LF-T7 combines two protective functions in a single device. The T-filter section uses series impedance elements (thin-film resistors or integrated inductors) to create a low-pass filter that attenuates high-frequency EMI noise above the signal bandwidth. The shunt TVS diodes provide transient voltage suppression by clamping voltage spikes from ESD events to safe levels. When an ESD strike occurs, the TVS diode rapidly avalanches, creating a low-impedance path that diverts the transient current away from the protected IC. The T-filter’s series elements limit the current through the TVS diode while also filtering the residual high-frequency energy. The bidirectional TVS configuration protects against both positive and negative polarity transients without distorting AC-coupled signals.
Pin Description: STF701-LF-T7 Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I/O 1 | I/O | Protected signal line (line side) |
| 2 | GND | Power | Ground connection |
| 3 | I/O 2 | I/O | Protected signal line (IC side) |
| 4 | I/O 3 | I/O | Protected signal line (IC side) |
| 5 | GND | Power | Ground connection |
| 6 | I/O 4 | I/O | Protected signal line (line side) |
Application Scenarios: In which products and applications is STF701-LF-T7 used
Alternative Models: What chips are recommended as replacements for STF701-LF-T7
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| Semtech | STF701TG | SC-88-6 | Original T-filter + TVS, same function |
| ON Semiconductor | NUP4202MR6 | SOT-23-6 | Quad TVS array, similar ESD protection |
| TI | TPD4E05U06 | USON-10 | Quad-channel ESD protection |
| Nexperia | PRTR5V0U2X | SOT-143 | Dual TVS + Zener for USB |
| STMicroelectronics | USB6B1 | SO-8 | Quad TVS for USB protection |
Recommend Parts

TMP275AIDR
0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC
Brand: TI
Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)
IN STOCK: 3681pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFS4227TRLPBF
IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)
Brand: infineon
Package: D2PAK (TO-263)
IN STOCK: 4334pcs
Cargo cycle: 3-7 Days
The minimum order is 1

CD4070BM96
Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14
Brand: TI
Package: SOIC-14 (8.75 x 3.9 x 1.5mm)
IN STOCK: 4245pcs
Cargo cycle: 3-7 Days
The minimum order is 1

LP2980IM5-5.0
50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)
IN STOCK: 2557pcs
Cargo cycle: 3-7 Days
The minimum order is 1








