Opens in a new tab

STM32F091RCT7

32-bit Cortex-M0 MCU, 256KB Flash, 8x USART, CAN, USB, LQFP-64, tape and reel

6538

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F091RCT7

Package:

LQFP-64 (10 x 10 x 1.4 mm, RC package, 0.5mm pitch, tape and reel)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F091RCT7 from STMicroelectronics is a 32-bit ARM Cortex-M0 MCU with 256KB Flash, 32KB SRAM, 12-bit ADC/DAC, 8 USARTs, CAN, and USB in a 64-pin LQFP package at 48MHz. The T7 suffix indicates tape-and-reel packaging.

Key Specifications

Core ARM Cortex-M0 (32-bit)
Max Frequency 48 MHz
Flash Memory 256 KB
SRAM 32 KB
I/O Pins 55 (5V tolerant)
ADC 12-bit, 1.0 us, 16 channels
DAC 12-bit, 2 channels
Communication 8x USART, 2x I2C, 3x SPI, 1x CAN 2.0B, 1x USB 2.0 FS
Timers 1x 32-bit + 5x 16-bit + 1x SysTick + 2x WDG
Supply Voltage 2.0V to 3.6V
Package LQFP-64 (10x10mm)
Packaging Tape and Reel (T7 suffix)
Operating Temperature -40 to +85 C

Features

  • 256KB Flash with dual-bank architecture for concurrent R/W
  • 8 USARTs with smartcard, LIN, and IrDA support
  • CAN 2.0B active interface
  • 12-bit ADC with 1.0us conversion time
  • 12-bit DAC with 2 output channels
  • USB 2.0 full-speed device

Applications

  • Industrial control and PLC
  • Handheld devices with USB connectivity
  • Motor control with sensor feedback
  • CAN bus communication nodes
Product Introduction: STM32F091RCT7 Product Introduction

The STM32F091RCT7 from STMicroelectronics is the tape-and-reel (T7 suffix) variant of the STM32F091RC, a high-value 32-bit ARM Cortex-M0 microcontroller in the STM32F0 series. The device offers an exceptional combination of 256KB Flash, 32KB SRAM, 8 USARTs, CAN 2.0B, and USB 2.0 full-speed in a single chip, making it one of the most feature-rich Cortex-M0 devices available. The 8 USARTs are a standout feature that enables simultaneous communication with multiple serial devices including RS-485 transceivers, GPS modules, wireless modems, and debug ports without needing external multiplexers. The CAN 2.0B active interface supports standard and extended frames at up to 1Mbps, suitable for automotive and industrial CAN networks. The USB 2.0 full-speed device interface with dedicated 512-byte SRAM buffer supports all USB transfer types (control, interrupt, bulk, isochronous). The 12-bit ADC with hardware oversampling provides up to 16-bit effective resolution without software averaging. The two 12-bit DAC channels enable analog waveform generation for motor control and audio applications. The 64-pin LQFP package provides 55 I/O pins, all 5V tolerant, allowing direct connection to 5V peripherals without level shifters. The T7 suffix indicates tape-and-reel packaging for automated SMT assembly, as opposed to the T6 suffix (tray) or TR suffix (tape and reel, alternate).

Working Principle: STM32F091RCT7 Working Principle

The STM32F091RCT7 operates as a 32-bit ARM Cortex-M0 microcontroller. Key subsystems include: (1) Cortex-M0 Core – a 32-bit ARMv6-M architecture processor with 16 general-purpose 32-bit registers; 2-stage pipeline; executes most Thumb-16 instructions in a single cycle at 48MHz (40 DMIPS); hardware multiply in 1 cycle, hardware divide in 2-12 cycles; nested Vectored Interrupt Controller (NVIC) with 32 interrupt lines and 4 priority levels; (2) Memory – 256KB Flash with dual-bank architecture enabling concurrent read from one bank while erasing/programming the other; 32KB SRAM with parity checking on certain regions; flexible memory remap allows execution from SRAM or system memory (bootloader); (3) USART – 8 independent USARTs supporting synchronous/asynchronous modes, smartcard (ISO 7816), LIN, IrDA, and SPI; each USART has its own baud rate generator; TX/RX DMA support enables high-throughput communication without CPU intervention; (4) CAN – a CAN 2.0B active controller with 3 transmit mailboxes, 2 receive FIFOs (each 3 stages deep), and 28 filter banks; supports standard (11-bit) and extended (29-bit) identifiers; time-triggered communication option; (5) USB – a USB 2.0 full-speed device controller with 8 endpoints (including EP0 for control); dedicated 512-byte SRAM packet buffer; supports all transfer types; CRC generation/checking in hardware; (6) ADC/DAC – 12-bit ADC with 1.0us conversion time, hardware oversampling (up to 256x) for enhanced resolution, analog watchdog; 2x 12-bit DAC with DMA and timer-triggered conversion for waveform generation.

Pin Description: STM32F091RCT7 Pin Definition and Functions
Pin Group Count Function
VDD/VSS 2 pairs Power (2.0-3.6V) and ground
VDDA/VSSA 1 pair Analog supply
VBAT 1 Battery backup for RTC
NRST 1 System reset (active low)
BOOT0 1 Boot mode selection
OSC_IN/OSC_OUT 2 Main oscillator
OSC32_IN/OSC32_OUT 2 32.768kHz RTC oscillator
GPIO/AF 55 5V-tolerant I/O with ADC, DAC, USART, SPI, I2C, CAN, USB, Timer
Application Scenarios: In which products and applications is STM32F091RCT7 used
  • Industrial PLC: 8 USARTs connect to RS-485 modbus, HMI display, barcode scanner, GPS, and debug port simultaneously; CAN connects to CANopen network; USB for programming
  • Automotive gateway: CAN bus reads vehicle data, USB connects to host PC, DAC generates analog feedback signals, 55 I/O pins interface with relay boards
  • Motor controller: 12-bit ADC reads 3-phase current, DAC outputs reference for comparators, 6 PWM channels from timers drive motor driver, CAN for fieldbus communication
Alternative Models: What chips are recommended as replacements for STM32F091RCT7
Manufacturer Part Number Package Notes
ST STM32F091RCT6 LQFP-64 Same device, tray packaging
ST STM32F091CCT6TR LQFP-48 48-pin, fewer I/O, same peripherals
ST STM32F072RBT6 LQFP-64 128KB Flash, same package, USB+CAN
GigaDevice GD32F190RCT6 LQFP-64 Pin-compatible clone, 48MHz

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1