Opens in a new tab

STM32F101V8T6

Cortex-M3 36MHz MCU, 64KB Flash, 10KB RAM, 1 ADC, LQFP-100, access line, low cost

9642

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F101V8T6

Package:

LQFP-100 (14.0 x 14.0 x 1.60 mm, 0.50mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F101V8T6 from STMicroelectronics is a medium-density access line MCU with ARM Cortex-M3 core at 36MHz, 64KB Flash and 10KB SRAM in LQFP-100. It targets cost-sensitive applications requiring basic processing and communication.

Key Specifications

Core ARM Cortex-M3, 36 MHz
Flash Memory 64 KB
SRAM 10 KB
I/O Pins 80 (5V-tolerant)
ADC 1 x 12-bit, 1us, up to 16 channels
Communication 3x USART, 2x SPI, 2x I2C
Supply Voltage 2.0 V to 3.6 V
Operating Temperature -40C to +85C

Features

  • 36MHz Cortex-M3 with low power consumption for cost-sensitive designs
  • 64KB Flash and 10KB SRAM for moderate firmware requirements
  • 12-bit ADC with up to 16 channels and temperature sensor
  • 3 USARTs with LIN, IrDA, and Smartcard support
  • 7-channel DMA controller for peripheral data transfer
  • 6 timers including 3x 16-bit general-purpose and 2x watchdog

Applications

  • Application control and user interface
  • Medical and handheld equipment
  • PC peripherals and gaming platforms
  • Industrial PLCs and HVAC controllers
Product Introduction: STM32F101V8T6 Product Introduction

The STM32F101V8T6 from STMicroelectronics is a medium-density access line 32-bit microcontroller based on the ARM Cortex-M3 core operating at up to 36MHz. As part of the access line (value-oriented) sub-family, the STM32F101 provides essential peripherals at a reduced cost compared to the performance line STM32F103. The device integrates 64KB of Flash memory and 10KB of SRAM. A single 12-bit ADC with up to 16 channels and 1us conversion time handles analog sensing. Communication interfaces include three USARTs (supporting LIN, IrDA, and ISO 7816 Smartcard), two SPIs (up to 18Mbit/s), and two I2Cs (SMBus/PMBus compatible). Six timers provide PWM generation, input capture, and watchdog functions. A 7-channel DMA controller offloads data transfer from the CPU. The 80 I/O pins in LQFP-100 package are nearly all 5V-tolerant and mappable to 16 external interrupt vectors. Low-power modes (Sleep, Stop, Standby) with VBAT backup extend battery life in portable applications.

Working Principle: STM32F101V8T6 Working Principle

The STM32F101V8T6 operates on the ARM Cortex-M3 core at reduced frequency for power efficiency. (1) Core: The Cortex-M3 executes Thumb-2 instructions with the NVIC supporting maskable interrupts and configurable priority levels. The 36MHz maximum clock is achieved through an internal PLL multiplying the external crystal (4-16MHz) or internal 8MHz RC oscillator. (2) Memory Bus: The AHB bus matrix connects the CPU and DMA to Flash, SRAM, and peripheral bridges. The 7-channel DMA supports memory-to-peripheral and peripheral-to-memory transfers for USART, SPI, I2C, and ADC. (3) ADC: The 12-bit successive-approximation ADC converts in 1us per channel. An analog watchdog feature generates an interrupt when the converted value falls outside programmed thresholds. An internal temperature sensor is connected to ADC channel 16. (4) Low Power: Sleep mode stops the CPU but keeps peripherals running. Stop mode halts all clocks and reduces current to microamp range. Standby mode powers down the core with only RTC and backup register retention via VBAT.

Pin Description: STM32F101V8T6 Pin Definition and Functions
Pin Group Count Function
PORTA 16 GPIO, USART, SPI, I2C, ADC, TIM
PORTB 16 GPIO, USART, SPI, I2C, TIM, ADC
PORTC 16 GPIO, USART, TIM, ADC
PORTD 16 GPIO, USART, TIM
PORTE 16 GPIO, TIM, ADC
VDD/VSS Multiple Power supply and ground
VBAT 1 Battery backup for RTC
NRST 1 Reset (active low)
BOOT0 1 Boot mode selection
Application Scenarios: In which products and applications is STM32F101V8T6 used
  • Application control and user interface with 80 I/O at 36MHz
  • Medical and handheld equipment with low-power Stop/Standby modes
  • PC peripherals and gaming platforms with 3 USARTs and USB-less design
  • Industrial PLCs and HVAC controllers with 12-bit ADC and DMA
Alternative Models: What chips are recommended as replacements for STM32F101V8T6
Manufacturer Part Number Package Notes
ST STM32F101VBT6 LQFP-100 128KB Flash, same package
ST STM32F103V8T6 LQFP-100 72MHz, USB, CAN upgrade
GigaDevice GD32F101V8T6 LQFP-100 Pin-compatible clone
ST STM32F101R8T6 LQFP-64 64-pin, smaller footprint

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1