Opens in a new tab

STM32F105VBT6

72MHz Cortex-M3 MCU with USB OTG, dual CAN 2.0B, 128KB Flash, 64KB SRAM in LQFP-100

9768

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F105VBT6

Package:

LQFP-100 (14.00 x 14.00 x 1.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F105VBT6 from STMicroelectronics is an ARM Cortex-M3 microcontroller running at 72MHz with 128KB Flash, 64KB SRAM, USB 2.0 full-speed OTG, and dual CAN 2.0B controllers in a 100-pin LQFP package. Part of the STM32 Connectivity line, it is designed for applications requiring USB and CAN interfaces.

Key Specifications

CPU Core ARM Cortex-M3, 72MHz
Flash Memory 128 KB
SRAM 64 KB
USB USB 2.0 Full-Speed OTG
CAN 2x CAN 2.0B
ADC 2 x 12-bit, 1Msps
Communication 5x USART, 3x SPI, 2x I2C
Supply Voltage 2.0V ~ 3.6V
Package LQFP-100 (14x14mm)
Operating Temperature -40°C ~ +85°C

Features

  • ARM Cortex-M3 core with hardware divide and single-cycle multiply
  • USB 2.0 full-speed OTG with integrated PHY
  • Dual CAN 2.0B controllers for automotive and industrial networking
  • 5 USARTs with SmartCard mode, IrDA, and LIN support
  • 2 x 12-bit ADC with up to 16 channels total
  • 7 timers including advanced-control and general-purpose types
  • Embedded CRC calculation unit

Applications

  • Industrial automation with CAN and USB connectivity
  • Medical diagnostic equipment
  • Building automation controllers
  • Automotive body electronics
  • USB-CAN protocol gateways
Product Introduction: STM32F105VBT6 Product Introduction

The STM32F105VBT6 is a member of the STMicroelectronics STM32 Connectivity line, featuring an ARM Cortex-M3 processor core running at 72MHz. This line is specifically designed for applications that require USB and CAN connectivity. The device integrates 128KB of Flash program memory and 64KB of SRAM. The USB 2.0 full-speed OTG interface includes an integrated PHY and supports host, device, and OTG modes. Two CAN 2.0B controllers provide connectivity for automotive and industrial networks. A comprehensive set of communication peripherals includes 5 USARTs, 3 SPI ports, and 2 I2C interfaces. The dual 12-bit ADC subsystem can sample at up to 1Msps.

Working Principle: STM32F105VBT6 Working Principle

The STM32F105VBT6 operates around the ARM Cortex-M3 core with its NVIC supporting up to 43 maskable interrupt channels. The multi-layer AHB bus matrix provides simultaneous access to Flash, SRAM, and peripherals from the core and DMA. The USB OTG controller integrates a full-speed PHY and supports SRP and HNP for OTG operation. The dual CAN controllers implement the CAN 2.0B protocol with hardware message filtering and transmit FIFOs. The ADC subsystem uses a 12-bit successive approximation architecture with configurable scan, continuous, and discontinuous modes. Power management includes multiple low-power modes (sleep, stop, standby) with wakeup sources from interrupts, CAN, USB, and external pins.

Pin Description: STM32F105VBT6 Pin Definition and Functions
Pin Name Function
1-8 PE0-PE7 GPIO/ADC/TIM
9 VDD 3.3V digital supply
10 VSS Ground
11-18 PA0-PA7 GPIO/USART/SPI/ADC/TIM
19-26 PB0-PB7 GPIO/I2C/CAN/TIM/ADC
27-34 PC0-PC7 GPIO/USART/SPI/ADC
35-42 PD0-PD7 GPIO/USART/CAN
43-50 PE8-PE15 GPIO/TIM
51-66 PA8-PA15, PB8-PB15 GPIO/USART/TIM/I2C/USB/CAN
67-82 PC8-PC15, PD8-PD15 GPIO/USART/TIM
83 VDDA Analog supply
84 VSSA Analog ground
85 VBAT Battery backup
86 NRST Reset
Application Scenarios: In which products and applications is STM32F105VBT6 used
  • USB-CAN Protocol Gateway: Dual CAN controllers and USB OTG enable protocol conversion between USB and CAN bus for automotive diagnostics
  • Industrial PLC Controller: 5 USARTs connect to multiple serial field devices; CAN provides deterministic bus communication
  • Medical Diagnostic Device: USB OTG supports both data download and peripheral control; dual ADC channels acquire sensor data
  • Building Automation Controller: 72MHz Cortex-M3 handles BACnet protocol; CAN connects to field bus; USB for configuration
Alternative Models: What chips are recommended as replacements for STM32F105VBT6
Model Manufacturer Key Difference
STM32F107VCT6 ST Same family with Ethernet MAC, 256KB Flash
STM32F105RCT6 ST Same, LQFP-64, fewer GPIO
LPC1759FBD80 NXP 120MHz Cortex-M3, USB, CAN, Ethernet
AT32F407VGT7 Artery 240MHz Cortex-M4, compatible, Ethernet
GD32F205VCT6 GigaDevice 120MHz Cortex-M3, USB OTG, CAN

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1