Opens in a new tab

Home » Microcontrollers (MCU) » STM32F302RCT6

STM32F302RCT6

ARM Cortex-M4 72MHz MCU, 256KB Flash, 40KB SRAM, dual ADC 5Msps, 4 comparators, 2 op-amps, CAN, USB, LQFP-64

8742

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F302RCT6

Package:

LQFP-64 (10x10x1.4 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F302RCT6 from STMicroelectronics is a mainstream mixed-signal MCU based on the ARM Cortex-M4 core with FPU, operating at up to 72 MHz. It features 256 KB Flash, 40 KB SRAM, dual 12-bit ADCs at 5 Msps, four comparators, two op-amps, DAC, and CAN/USB interfaces in a 64-pin LQFP package.

Key Specifications

Core ARM Cortex-M4 with FPU, up to 72 MHz
Flash Memory 256 KB
SRAM 40 KB (first 16 KB with HW parity)
ADC 2x 12-bit, 5 Msps, up to 17 channels
DAC 1x 12-bit channel
Comparators 4x rail-to-rail
Op-Amps 2x (PGA mode capable)
Supply Voltage 2.0 V to 3.6 V
Interfaces CAN 2.0B, USB 2.0 FS, 3x SPI, 2x I2C, 5x USART/UART
Timers 11 (1x 32-bit, advanced motor control)
I/Os Up to 51 fast I/Os
Package LQFP-64 (10x10x1.4 mm)
Operating Temperature -40°C to +85°C

Features

  • ARM Cortex-M4 32-bit CPU with FPU and DSP instructions at 72 MHz
  • Dual 12-bit ADCs at 5 Msps with selectable resolution and differential input
  • Four rail-to-rail analog comparators and two PGA-capable op-amps
  • Advanced motor control timer with dead-time generation and emergency stop
  • Touch-sensing capability with up to 24 capacitive sensing channels
  • CAN 2.0B and USB 2.0 full-speed communication interfaces

Applications

  • Motor control and power conversion with integrated analog peripherals
  • Industrial automation with CAN bus communication
  • Consumer appliances requiring touch sensing and motor drive
Product Introduction: STM32F302RCT6 Product Introduction

The STM32F302RCT6 from STMicroelectronics is a mainstream mixed-signal microcontroller based on the high-performance ARM Cortex-M4 32-bit RISC core with floating-point unit (FPU) operating at a frequency of up to 72 MHz. The device embeds 256 Kbytes of Flash memory and 40 Kbytes of SRAM with hardware parity check on the first 16 Kbytes. The STM32F302RCT6 integrates a rich set of analog peripherals including two fast 12-bit ADCs (5 Msps) with selectable resolution of 12/10/8/6 bits and differential input capability, one 12-bit DAC channel, four rail-to-rail analog comparators, and two operational amplifiers that can be configured in programmable gain amplifier (PGA) mode with all terminals accessible. The advanced-control timer with complementary PWM outputs, dead-time generation, and emergency stop makes this device particularly well-suited for motor control applications. Communication interfaces include CAN 2.0B Active, USB 2.0 full-speed, up to three SPIs (two with I2S), two I2C Fast Mode Plus, and up to five USART/UARTs.

Working Principle: STM32F302RCT6 Working Principle

The STM32F302RCT6 operates as a 32-bit ARM Cortex-M4 microcontroller with integrated mixed-signal peripherals. The Cortex-M4 core with FPU supports single-precision floating-point operations compliant with IEEE 754, enabling efficient DSP algorithm implementation. The dual ADCs use a switched-capacitor successive approximation architecture sampling at up to 5 Msps. The comparators provide rail-to-rail input with programmable hysteresis and output filtering. The op-amps can be internally connected to ADC inputs and DAC outputs in PGA mode, enabling analog signal conditioning without external components. The TIM1 advanced motor control timer generates up to 6 complementary PWM channels with programmable dead-time and break inputs for emergency shutdown.

Pin Description: STM32F302RCT6 Pin Definition and Functions
Pin Group Pins Function
Power VDD, VDDA, VSS, VSSA Digital and analog supply/ground
Reset/Clock NRST, OSC_IN, OSC_OUT Reset, HSE oscillator
Boot BOOT0 Boot mode selection
GPIO PA0-PA15, PB0-PB15, PC0-PC15, PD0-PD2 Up to 51 fast I/Os, 5V-tolerant
USB PA11(USBDM), PA12(USBDP) USB 2.0 full-speed
CAN PB8(CANRX), PB9(CANTX) CAN 2.0B interface
Application Scenarios: In which products and applications is STM32F302RCT6 used
  • Motor control with integrated op-amps, comparators, and advanced PWM timer
  • Industrial automation with CAN bus and capacitive touch sensing
  • Power conversion with dual ADCs and PGA-configurable analog front-end
Alternative Models: What chips are recommended as replacements for STM32F302RCT6
Manufacturer Part Number Package Notes
ST STM32F303RCT6 LQFP-64 4 ADCs, 72MHz, more analog
ST STM32F302RDT6 LQFP-64 384KB Flash, more RAM
ST STM32G473RBT6 LQFP-64 170MHz, next-gen analog

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1