Opens in a new tab

STM32F303CBT6

Cortex-M4F 72MHz, 128KB, 4xADC 5Msps, 7 comp, 4 op-amp, LQFP-48

7689

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F303CBT6

Package:

LQFP-48 (7 x 7 x 1.4 mm, T package, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F303CBT6 from STMicroelectronics is a mixed-signal 32-bit MCU with Cortex-M4F at 72MHz, 128KB Flash, 40KB RAM, four 12-bit 5MSPS ADCs, 7 comparators, 4 op-amps, and 2 DACs in a 48-pin LQFP package.

Key Specifications

Core ARM Cortex-M4 with FPU and DSP
Max Frequency 72 MHz
Flash Memory 128 KB
SRAM 40 KB (32KB + 8KB CCM)
ADC 4 x 12-bit, 5 MSPS, up to 39 channels
DAC 2 x 12-bit
Comparators 7 (rail-to-rail, fast)
Op-Amps 4 (PGA mode, all terminals accessible)
Touch Sensing Up to 24 capacitive channels
Timers 13 (including 2x motor control PWM)
Communication 3x USART, 2x UART, 2x I2C, 3x SPI, CAN, USB
Supply Voltage 2.0V to 3.6V
Package LQFP-48 (7x7mm)
Operating Temperature -40 to +85 C

Features

  • Four 5MSPS 12-bit ADCs for simultaneous sampling
  • Seven fast rail-to-rail comparators
  • Four op-amps with PGA mode
  • Two 12-bit DAC channels
  • Dual motor control timers with dead-time
  • 24-channel capacitive touch sensing

Applications

  • Motor control and drive systems
  • Power conversion and inverters
  • Industrial sensing and measurement
  • Medical instrumentation
Product Introduction: STM32F303CBT6 Product Introduction

The STM32F303CBT6 from STMicroelectronics is a mainstream mixed-signal microcontroller from the STM32F3 series, based on the ARM Cortex-M4 core with floating-point unit (FPU) and DSP instructions operating at up to 72MHz. What distinguishes the STM32F303 from other STM32 families is its exceptional analog peripheral integration: four independent 12-bit ADCs capable of 5MSPS each (enabling simultaneous sampling of multiple signals), seven fast rail-to-rail comparators, four operational amplifiers with programmable gain (PGA mode), and two 12-bit DAC channels. This rich analog subsystem makes the STM32F303 ideal for mixed-signal applications that require both digital processing and precision analog interfacing in a single chip. The four ADCs can be triggered simultaneously from different timer sources, enabling precise multi-channel measurement for motor control (three-phase current sensing) and power conversion applications. The seven comparators provide fast overcurrent and overvoltage protection with minimal latency, critical for motor drive and power converter safety. The four internal op-amps eliminate external amplifier circuits for signal conditioning, with all terminals accessible for flexible configuration as inverting/non-inverting amplifiers, followers, or PGA with programmable gains of 2, 4, 8, 16, 32, or 64. The two advanced motor control timers with PWM generation, dead-time insertion, and emergency stop support Field Oriented Control (FOC) of brushless DC motors and PMSM motors.

Working Principle: STM32F303CBT6 Working Principle

The STM32F303CBT6 operates as a mixed-signal Cortex-M4 microcontroller. Key subsystems include: (1) Cortex-M4F Core – a 32-bit RISC processor with single-cycle DSP instructions (MAC, SIMD) and single-precision FPU; the FPU accelerates floating-point motor control algorithms (Park/Clarke transforms, PID); 90 DMIPS performance from the CCM RAM; (2) Four ADCs – four independent 12-bit successive-approximation ADCs, each with 5MSPS conversion rate and up to 10 external channels; the ADCs can operate in dual or triple interleaved mode for higher effective sampling rates; each ADC has its own trigger source from different timers, enabling simultaneous multi-channel sampling; the 12/10/8/6-bit resolution is configurable for speed vs. accuracy tradeoff; (3) Op-Amps – four internal rail-to-rail operational amplifiers with all terminals (inverting input, non-inverting input, output) accessible on external pins; each op-amp can be configured as a voltage follower, inverting amplifier, or PGA with programmable gain; the PGA mode amplifies small sensor signals (e.g., current shunt voltage) before ADC conversion, improving signal-to-noise ratio; (4) Comparators – seven rail-to-rail comparators with programmable hysteresis and speed/power tradeoff; the fast mode provides 30ns propagation delay for overcurrent protection; the output can be connected to timer break inputs for immediate PWM shutdown; (5) Motor Control Timers – two advanced 16-bit timers (TIM1 and TIM20) with up to 6 PWM channels, complementary outputs with programmable dead-time, and break input for emergency shutdown; the break input from comparators provides hardware-level overcurrent protection with minimal latency.

Pin Description: STM32F303CBT6 Pin Definition and Functions
Pin Group Count Function
VDD/VSS 2 pairs Power and ground
VDDA/VSSA 1 pair Analog power and ground
VBAT 1 Battery backup for RTC
NRST 1 Reset (active low)
BOOT0 1 Boot mode selection
SWDIO/SWCLK 2 Serial Wire Debug
GPIO/AF 39 General I/O with alternate functions (ADC, DAC, op-amp, comp, timers, UART, SPI, I2C, CAN, USB)
Application Scenarios: In which products and applications is STM32F303CBT6 used
  • BLDC motor FOC: 3 ADCs simultaneously sample phase currents, op-amps amplify shunt voltage, comp for overcurrent, timer PWM with dead-time
  • Power inverter: 4 ADCs sample voltage and current, DAC generates reference, comp for fault protection, CAN for communication
  • Medical ECG: op-amps amplify bio-potential, 12-bit ADC digitizes, DSP filters, USB transmits data to PC
  • Industrial sensor: 4 ADCs read multiple sensor channels simultaneously, PGA amplifies low-level signals, touch sense for user interface
Alternative Models: What chips are recommended as replacements for STM32F303CBT6
Manufacturer Part Number Package Notes
ST STM32F303CCT6 LQFP-48 256KB Flash version
ST STM32F303RBT6 LQFP-64 64-pin, more I/O and ADC channels
TI TMS320F28027PTR TQFP-48 C28x DSP, motor control focused
Microchip dsPIC33EP64MC504-I/PT TQFP-44 16-bit dsPIC, motor control

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1