The STM32F407VGT6TR from STMicroelectronics is a high-performance ARM Cortex-M4F microcontroller in a 100-pin LQFP package with tape-and-reel packaging. It features 168 MHz CPU frequency, 1 MB Flash, 192+4 KB SRAM (including 64 KB CCM), FPU, DSP instructions, ART Accelerator, 3x 12-bit ADC (2.4 MSPS), 2x 12-bit DAC, 14 timers, USB OTG FS+HS, 10/100 Ethernet MAC, 2x CAN, FSMC, DCMI, and TRNG. Operating voltage is 1.8-3.6 V with industrial temperature range (-40C to +85C). TR suffix denotes tape-and-reel packaging.
Home » Clock & Timing ICs, Integrated Circuits ICs » STM32F407VGT6TR
STM32F407VGT6TR
ARM Cortex-M4F MCU, 168MHz, 1MB Flash, 192KB SRAM, FPU, USB HS+FS, ETH, 2xCAN, LQFP100 T&R
Effective Inventory
Manufacturer Part:
STM32F407VGT6TR
Package:
LQFP-100 (14 x 14 x 1.4 mm, 0.5mm pitch, gull-wing)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: STM32F407VGT6TR Product Introduction
The STM32F407VGT6TR from STMicroelectronics is the tape-and-reel version of the STM32F407VGT6, a high-performance ARM Cortex-M4F microcontroller in a 100-pin LQFP package. It belongs to the STM32F407xx family, which is one of the most popular ARM Cortex-M4 microcontroller families in the embedded industry.
The Cortex-M4F core operates at up to 168 MHz with single-precision floating-point unit (FPU) supporting all ARM single-precision data-processing instructions. The core also implements a full set of DSP instructions (MAC, SAT, SIMD) and a Memory Protection Unit (MPU). ST’s ART (Adaptive Real-Time) Accelerator enables 0-wait-state execution from Flash memory at 168 MHz, delivering 210 DMIPS performance.
Memory includes 1 MB Flash, 192 KB SRAM (128 KB main + 64 KB CCM data RAM), 4 KB backup SRAM, and 512 bytes OTP. The CCM (Core Coupled Memory) provides zero-wait-state data access for time-critical routines. The Flexible Static Memory Controller (FSMC) supports external SRAM, PSRAM, NOR, and NAND memories.
Analog peripherals include three 12-bit ADCs (2.4 MSPS each, up to 7.2 MSPS in triple interleaved mode with 24 channels total), two 12-bit DACs, and two analog comparators. The 14 timers include twelve 16-bit timers (two for motor control PWM), two 32-bit timers, and a SysTick timer.
Communication interfaces are extensive: USB 2.0 full-speed device/host/OTG with on-chip PHY, USB 2.0 high-speed/full-speed device/host/OTG with dedicated DMA and ULPI, 10/100 Ethernet MAC with IEEE 1588v2 hardware support, 2x CAN 2.0B, 3x I2C, 3x SPI (42 Mbps, 2 with I2S), 4x USART + 2x UART (10.5 Mbps), SDIO, and 8-14 bit camera interface (DCMI).
The 82 GPIO pins are 5 V tolerant with interrupt capability and configurable speed up to 84 MHz. Debug interfaces include SWD and JTAG with Cortex-M4 Embedded Trace Macrocell.
The STM32F407VGT6TR is Active status at ST and widely available from distributors. The TR suffix indicates tape-and-reel packaging for automated SMT assembly. The tray-packaged version is STM32F407VGT6.
Working Principle: STM32F407VGT6TR Working Principle
**Cortex-M4F Core:** The ARM Cortex-M4F is a 32-bit RISC processor with 3-stage pipeline, hardware FPU (single-precision IEEE 754), DSP instructions (MAC, SAT, SIMD), and MPU. The FPU accelerates floating-point calculations critical for motor control, audio processing, and sensor fusion. DSP instructions enable efficient FIR/IIR filter implementation.
**ART Accelerator:** The Adaptive Real-Time Accelerator uses an instruction cache and literal pool cache to enable 0-wait-state Flash access at 168 MHz. Without the ART accelerator, the 3-cycle Flash access time would limit performance to approximately 56 MHz (168/3). The 128-bit wide Flash interface prefetches up to 4 instructions per access, achieving near-zero wait-state performance.
**Memory Architecture:** The multi-AHB bus matrix provides parallel access paths between the core, DMA, and peripherals. The 64 KB CCM RAM is directly coupled to the core via the I-bus/D-bus, providing zero-wait-state access independent of the bus matrix. The main 128 KB SRAM is accessible by both the core and DMA controllers via the bus matrix.
**DMA Controller:** The 16-stream DMA controller with FIFOs and burst support offloads data transfers from the CPU. Each stream can be configured for peripheral-to-memory, memory-to-peripheral, or memory-to-memory transfers. The double-buffer mode enables seamless circular DMA operation.
**Power Management:** The device supports Sleep, Stop, and Standby low-power modes. The VBAT domain powers the RTC, backup registers, and backup SRAM when the main supply is removed. The internal regulator generates the 1.2 V core voltage from the 1.8-3.6 V supply.
Pin Description: STM32F407VGT6TR Pin Definition and Functions
| Pin Group | Name | Type | Description |
|---|---|---|---|
| Multiple | VDD | P | Digital supply; 1.8-3.6V; multiple VDD pins must all be connected; decouple each with 100nF + 4.7uF; powers core and I/O |
| Multiple | VSS | G | Digital ground; multiple VSS pins; connect all to ground plane; return path for I/O and core current |
| 1 | VBAT | P | Battery backup supply; powers RTC, backup registers, backup SRAM when VDD is off; 1.65-3.6V; connect to VDD or battery; decouple with 100nF |
| 1 | VDDA | P | Analog supply; 1.8-3.6V; powers ADC, DAC, comparators, PLL, reset; must be clean; decouple with 100nF + 1uF; connect to VDD via ferrite bead for noise isolation |
| 1 | VSSA | G | Analog ground; return for ADC/DAC; connect to ground plane at single point near VSSA; star grounding recommended |
| Multiple | BOOT0 | I | Boot mode selection; LOW = boot from Flash; HIGH = boot from system memory (bootloader); connect with 10k pull-down and optional jumper |
| 2 | NRST | I/O | System reset; active-low; open-drain with internal pull-up; Schmitt trigger input; can be driven externally; internal power-on reset |
| 82 | GPIO | I/O | General-purpose I/O; 5V tolerant; configurable as input/output/alternate-function/analog; up to 84MHz toggle speed; programmable pull-up/pull-down; interrupt capability on all pins |
| Dedicated | OSC_IN/OUT | I/O | External crystal oscillator; 4-26 MHz; also configurable as external clock input; bypass with 2x22pF load capacitors |
| Dedicated | OSC32_IN/OUT | I/O |
Application Scenarios: In which products and applications is STM32F407VGT6TR used
| Application | Description |
|---|---|
| Industrial Motor Control | 3-phase motor control with FOC algorithm; FPU accelerates Park/Clarke transforms; 3x ADC for simultaneous current sensing; 2x motor-control PWM timers; CAN for fieldbus; Ethernet for remote monitoring |
| Networked Data Acquisition | Multi-channel sensor acquisition with Ethernet connectivity; 3x ADC for up to 24 channels; DMA for continuous sampling; Ethernet MAC with IEEE 1588 for time-stamping; USB for local data download |
| Consumer Audio/Video Device | Audio processing with I2S interface; FPU for audio DSP; USB HS for audio streaming; DCMI for camera input; 168MHz handles audio decode in real-time; DAC for audio output |
Alternative Models: What chips are recommended as replacements for STM32F407VGT6TR
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| STM32F407VGT6 | ST | Same Part (Tray) | Identical function; tray packaging (90 units); same LQFP100 footprint; use for manual assembly or low-volume production |
| STM32F417VGT6 | ST | Higher Security | Same as STM32F407 with added hardware crypto (AES, DES, HASH); same pinout and Flash/RAM; use when encryption/hash needed |
| STM32F427VGT6 | ST | Performance Upgrade | 180 MHz; 256KB SRAM; Chrom-ART accelerator for 2D graphics; same LQFP100; use when higher performance needed; not fully pin-compatible (check errata) |
| STM32H743VIT6 | ST | Next-Gen Platform | 400 MHz Cortex-M7; 2MB Flash; 1MB SRAM; much higher performance; LQFP100; use for new designs needing more performance; different toolchain |
Recommend Parts

RK73B2ATTD100J
10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm
IN STOCK: 26435pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPL5010DDCR
Nano-power watchdog timer with power good, SOT-23-6
Brand: TI
Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)
IN STOCK: 12122pcs
Cargo cycle: 3-7 Days
The minimum order is 1

NCP302045MNTWG
45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8
Brand: ON
Package: DFN-8 (3x3mm, 0.65mm pitch)
IN STOCK: 4759pcs
Cargo cycle: 3-7 Days
The minimum order is 1

AD9912ABCPZ
1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64
Brand: ADI
Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)
IN STOCK: 3719pcs
Cargo cycle: 3-7 Days
The minimum order is 1








