Opens in a new tab

STM32F765VIT6

Cortex-M7 216MHz, 2MB Flash, 512KB SRAM, DP-FPU, L1 cache, Ethernet, LQFP-100

14321

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F765VIT6

Package:

LQFP-100 (14.00 x 14.00 x 1.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F765VIT6 from STMicroelectronics is a high-performance ARM Cortex-M7 MCU with 2MB Flash and 512KB SRAM in a LQFP-100 package. Running at 216MHz with double-precision FPU, L1 cache, and Art Accelerator, it delivers 462 DMIPS for demanding DSP and graphics applications.

Key Specifications

Core ARM Cortex-M7 with DP-FPU
Max Frequency 216 MHz
Flash 2 MB (dual-bank)
SRAM 512 KB + 16KB ITCM + 4KB backup
L1 Cache 16 KB I/D cache
ADC 3x 12-bit, 2.4 MSPS
Ethernet 10/100 MAC with IEEE 1588v2
Operating Temperature -40C to +85C

Features

  • Cortex-M7 at 216MHz with double-precision FPU and DSP instructions
  • Art Accelerator with 16KB L1 cache for 0-wait Flash execution
  • 2MB dual-bank Flash with read-while-write capability
  • Chrom-ART (DMA2D) graphic accelerator and hardware JPEG codec
  • 10/100 Ethernet MAC with IEEE 1588v2 hardware timestamp
  • USB 2.0 HS/FS OTG with on-chip PHY and ULPI

Applications

  • Industrial HMI with LCD-TFT and graphics acceleration
  • Networking gateways with Ethernet and USB connectivity
  • Motor control with FPU and three 12-bit ADCs
  • Audio processing with SAI and SPDIFRX interfaces
Product Introduction: STM32F765VIT6 Product Introduction

The STM32F765VIT6 from STMicroelectronics is a high-performance ARM Cortex-M7 32-bit microcontroller in a LQFP-100 package. Operating at up to 216MHz with a double-precision floating-point unit (FPU) and full DSP instruction set, the device delivers 462 DMIPS performance. The Art Accelerator with 16KB L1 instruction/data cache enables 0-wait-state execution from both embedded Flash and external memories. The 2MB dual-bank Flash supports read-while-write operation, and the 512KB SRAM includes 128KB of data TCM RAM for deterministic real-time data access and 16KB of instruction TCM RAM for critical routines. Advanced peripherals include three 12-bit 2.4MSPS ADCs, two 12-bit DACs, a Chrom-ART (DMA2D) graphic accelerator, hardware JPEG codec, LCD-TFT controller, 10/100 Ethernet MAC with IEEE 1588v2, USB 2.0 HS/FS OTG, six SPIs, four I2Cs, eight USARTs, three CANs, two SDMMCs, dual-mode Quad-SPI, SAI audio interfaces, and SPDIFRX. An FMC supports external SDRAM, SRAM, NOR, and NAND memories.

Working Principle: STM32F765VIT6 Working Principle

The STM32F765VIT6 integrates a Cortex-M7 core with advanced memory and peripheral subsystems. (1) Core: The Cortex-M7 features a 6-stage superscalar pipeline with branch prediction, achieving 2.14 DMIPS/MHz. The double-precision FPU supports IEEE 754 single and double-precision operations in hardware. DSP instructions include SIMD, MAC, and saturating arithmetic. (2) Art Accelerator: A proprietary instruction prefetch and cache system with 16KB I-cache and 16KB D-cache eliminates wait states for linear code execution from Flash. An adaptive real-time accelerator prefetches branches. (3) TCM: The 128KB data TCM and 16KB instruction TCM provide deterministic, zero-wait-state access for time-critical data and code, independent of the cache. (4) DMA: Two 16-stream DMA controllers with FIFOs and burst support handle data transfers between peripherals and memory without CPU intervention. The Chrom-ART DMA2D provides hardware-accelerated 2D graphics operations. (5) Ethernet: The 10/100 MAC includes IEEE 1588v2 hardware timestamping for precise time synchronization in networked systems.

Pin Description: STM32F765VIT6 Pin Definition and Functions
Pin Group Name Type Function
1-25 PORTA I/O GPIO, ADC, ETH, USB, TIM
26-50 PORTB/C I/O GPIO, I2C, SPI, USART, CAN
51-75 PORTC/D/E I/O GPIO, FMC, ADC, TIM, SAI
76-100 PORTF/G + Power Mixed GPIO, FMC, VDD, VSS, BOOT
Application Scenarios: In which products and applications is STM32F765VIT6 used
  • Industrial HMI with LCD-TFT and Chrom-ART graphics acceleration at 216MHz
  • Networking gateways with 10/100 Ethernet and USB 2.0 HS connectivity
  • Motor control with DP-FPU and three 12-bit ADCs at 2.4MSPS
  • Audio processing with SAI, SPDIFRX, and 512KB SRAM buffering
Alternative Models: What chips are recommended as replacements for STM32F765VIT6
Manufacturer Part Number Package Notes
ST STM32F767VIT6 LQFP-100 Same + Ethernet MAC and camera
ST STM32H743VIT6 LQFP-100 Cortex-M7 at 480MHz, next-gen
NXP i.MX RT1062CVL5B LQFP-144 Cortex-M7 at 600MHz, crossover
Microchip SAME70Q21B-AUT LQFP-144 Cortex-M7, 300MHz, Ethernet

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1