Opens in a new tab

Home » Integrated Circuits ICs » STM32G030K6T6

STM32G030K6T6

Cortex-M0+ MCU, 32KB Flash, 8KB RAM, 64MHz, 12-bit ADC, LQFP-32

9506

Effective Inventory

Image for reference only

Manufacturer Part:

STM32G030K6T6

Package:

LQFP-32 (7 x 7 x 1.4 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32G030K6T6 from STMicroelectronics is a mainstream value-line Arm Cortex-M0+ microcontroller with 32KB Flash, 8KB RAM, 64MHz CPU, 12-bit ADC, 2x USART, 2x SPI, 2x I2C in a 32-pin LQFP package.

Key Specifications

Core Arm Cortex-M0+ 32-bit
Max CPU Frequency 64 MHz
Flash Memory 32 KB
SRAM 8 KB (with HW parity)
Supply Voltage 2.0V to 3.6V
I/O Pins 29 (5V-tolerant)
ADC 12-bit, 2.5 MSps, up to 16 channels
Timers 1x advanced PWM, 4x 16-bit GP, 2x WDG, SysTick
USART 2 (one with ISO7816, LIN, IrDA, auto-baud)
SPI 2 (32 Mbit/s, one with I2S)
I2C 2 (FM+ 1Mbit/s, one with SMBus)
DMA 5-channel
RTC Yes (with alarm, wakeup from Stop/Standby)
Debug SWD (Serial Wire Debug)
Package LQFP-32 (7x7mm)
Operating Temperature -40 to +85 C

Features

  • Cost-effective Cortex-M0+ entry-level MCU
  • 5V-tolerant I/Os for mixed-voltage designs
  • Hardware parity check on SRAM for reliability
  • Low-power modes: Sleep, Stop, Standby
  • VBAT pin for RTC backup
  • 16 MHz RC with PLL, 32 kHz RC oscillator
  • Memory Protection Unit (MPU)
  • CRC calculation unit

Applications

  • Consumer appliances
  • Industrial sensor nodes
  • LED lighting control
  • IoT end devices
  • Cost-sensitive embedded systems
Product Introduction: STM32G030K6T6 Product Introduction

The STM32G030K6T6 from STMicroelectronics is an entry-level 32-bit microcontroller from the STM32G0 Value Line family, based on the Arm Cortex-M0+ core operating at up to 64MHz. With 32KB of Flash memory and 8KB of SRAM with hardware parity check, the device provides essential processing capability for cost-sensitive embedded applications in consumer, industrial, and IoT domains. The STM32G030K6 integrates a rich set of peripherals including a 12-bit ADC with 2.5 MSps conversion rate and up to 16 external channels, two USARTs (one supporting ISO7816 smart card, LIN, and IrDA), two SPIs (up to 32 Mbit/s, one with I2S), and two I2C interfaces supporting Fast-mode Plus at 1 Mbit/s. The advanced-control PWM timer with complementary outputs supports motor control and power conversion applications. Multiple 5V-tolerant I/O pins simplify mixed-voltage system design by allowing direct connection to 5V peripherals without level shifters. Low-power modes (Sleep, Stop, Standby) combined with optimized dynamic consumption enable battery-powered applications. The VBAT pin maintains RTC and backup register operation when the main supply is removed. The device operates from 2.0V to 3.6V supply voltage in the -40 to +85C temperature range and is available in a compact 32-pin LQFP package. Development is supported by the STM32CubeG0 MCU Package, STM32CubeIDE, and NUCLEO-G031K8 evaluation board.

Working Principle: STM32G030K6T6 Working Principle

The STM32G030K6T6 operates as a 32-bit embedded microcontroller based on the Arm Cortex-M0+ architecture. Key subsystems include: (1) Cortex-M0+ Core – a 2-stage pipeline 32-bit RISC processor executing Thumb/Thumb-2 instruction set at up to 64MHz; the MPU (Memory Protection Unit) allows privileged software to define memory regions with access permissions; (2) Flash Memory Controller – 32KB of embedded Flash with read/write protection and option bytes for configuration; prefetch buffer improves instruction fetch performance at higher clock frequencies; (3) SRAM with Parity – 8KB of SRAM with hardware parity checking; if a parity error is detected, an interrupt can be generated for safety-critical applications; (4) Clock System – internal 16 MHz RC oscillator (with +/-1% accuracy after calibration) feeds a PLL that generates the 64MHz system clock; external 4-48 MHz crystal oscillator and 32 kHz crystal/RC are also available; clock security system (CSS) detects HSE failure and switches to HSI automatically; (5) DMA Controller – 5-channel DMA transfers data between peripherals and memory without CPU intervention, reducing CPU load for ADC conversion, SPI communication, and memory-to-memory operations; (6) ADC – 12-bit successive-approximation ADC with 2.5 MSps maximum conversion rate; hardware oversampling up to 16-bit equivalent resolution; up to 16 external channels plus 3 internal channels (VREFINT, VBAT, temperature sensor); (7) Low-Power Modes – Sleep mode stops CPU but keeps peripherals running; Stop mode stops CPU and most clocks, preserving SRAM and register contents; Standby mode powers down everything except RTC and backup registers, consuming only a few microamps.

Pin Description: STM32G030K6T6 Pin Definition and Functions
Pin Group Count Function
VDD/VSS 2 pairs Power supply and ground
VBAT 1 Battery backup for RTC
NRST 1 Reset input (active low)
BOOT0 1 Boot mode selection
SWDIO/SWCLK 2 Serial Wire Debug interface
GPIO/AF 29 General-purpose I/O with alternate function mapping
Application Scenarios: In which products and applications is STM32G030K6T6 used
  • LED lighting controller: 12-bit ADC reads analog dimmer, PWM timer drives LED strings, USART for DMX512
  • Industrial sensor node: ADC reads 4-20mA sensors, I2C to digital sensors, USART to Modbus RTU
  • Smart appliance: I2C for capacitive touch, PWM for motor/triac control, USART for Wi-Fi module
  • IoT endpoint: SPI to Sub-GHz radio, I2C to temperature/humidity sensor, RTC for timed wakeups
Alternative Models: What chips are recommended as replacements for STM32G030K6T6
Manufacturer Part Number Package Notes
ST STM32G030K8T6 LQFP-32 64KB Flash, same family
ST STM32G031K6T6 LQFP-32 G031 adds comparator and DAC
NXP LPC812M101JDH20 TSSOP-20 Cortex-M0+, smaller flash
Microchip SAMD20E15A-MUT QFN-32 Cortex-M0+, 32KB Flash

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1