Opens in a new tab

STM32G070KBT6

Cortex-M0+ MCU, 64MHz, 128KB Flash, LQFP-32

12300

Effective Inventory

Image for reference only

Manufacturer Part:

STM32G070KBT6

Package:

32-LQFP (7 x 7 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32G070KBT6 from STMicroelectronics is a 64MHz Arm Cortex-M0+ MCU with 128KB Flash, 36KB RAM, and comprehensive peripherals in 32-pin LQFP package.

Key Specifications

Core Arm Cortex-M0+ (64 MHz max)
Flash Memory 128 KB
RAM 36 KB
I/O Pins 27
ADC 1x 12-bit, 16 channels
Timers 1x 32-bit, 3x 16-bit, 2x 16-bit basic
Communication 2x USART, 2x SPI, 2x I2C
DMA 7-channel DMA
Supply Voltage 2.0V to 3.6V
Supply Current (Run) 58 uA/MHz typical
Supply Current (Stop) 5.5 uA typical
Package 32-LQFP (KBT6 suffix, 7x7mm)
Operating Temperature -40 to +85 C

Features

  • 64MHz Cortex-M0+ with DSP instructions and hardware divide
  • 128KB Flash with dual-bank architecture for concurrent R/W
  • 36KB SRAM with parity check for safety applications
  • Comprehensive USART/SPI/I2C connectivity
  • 58uA/MHz ultra-low power consumption

Applications

  • Industrial control and automation
  • Consumer appliance motor control
  • Smart home and IoT devices
  • Power tool and battery management
  • Health and wellness monitoring
Product Introduction: STM32G070KBT6 Product Introduction

The STM32G070KBT6 from STMicroelectronics is a mainstream Arm Cortex-M0+ microcontroller running at up to 64MHz with 128KB Flash and 36KB SRAM in a 32-pin LQFP package. The STM32G0 series introduces a new era of value-line MCUs with features normally found in higher-end devices: dual-bank Flash for concurrent read/write, hardware AES-256 encryption, and SRAM with parity check for functional safety. The device integrates two USARTs, two SPIs, two I2Cs, a 12-bit ADC with 16 channels, multiple timers, and a 7-channel DMA controller. The 58uA/MHz dynamic current and 5.5uA Stop mode current enable energy-efficient operation. The KBT6 suffix denotes 32-LQFP package with 128KB Flash and industrial temperature range.

Working Principle: STM32G070KBT6 Working Principle

The STM32G070KBT6 operates as an Arm Cortex-M0+ microcontroller. (1) The Cortex-M0+ core executes Thumb-2 instruction set with 64MHz maximum frequency, providing 0.95 DMIPS/MHz performance. The NVIC supports up to 32 external interrupts with configurable priority. The hardware divide unit completes 32-bit division in 2-12 cycles. The integrated SysTick timer supports RTOS scheduling. (2) The memory subsystem features 128KB dual-bank Flash and 36KB SRAM with parity check. The dual-bank architecture allows concurrent read and write operations: one bank can be programmed or erased while the other bank is executing code. The SRAM parity check detects single-bit errors for safety-critical applications. The 7-channel DMA controller offloads data transfer from the CPU. (3) The peripheral set includes two USARTs with smartcard and IrDA support, two SPIs up to 16MHz, two I2Cs with SMBus/PMBus support, a 12-bit ADC with hardware oversampling and self-calibration, and multiple timers including a 32-bit general-purpose timer and a 16-bit advanced timer for motor control PWM generation.

Pin Description: STM32G070KBT6 Pin Definition and Functions
Pin Group Name Function
1-8 PA0-PA7 Port A: ADC/USART/SPI/TIM
9-16 PA8-PA15 Port A: TIM/I2C/SPI/MCO
17-24 PB0-PB7 Port B: ADC/USART/I2C/TIM
25-32 PB8-PB15/VDD/VSS Port B: I2C/TIM, power, NRST
Application Scenarios: In which products and applications is STM32G070KBT6 used
  • Industrial control and automation with 12-bit ADC and multiple timers
  • Consumer appliance motor control with advanced PWM timer
  • Smart home and IoT devices with 58uA/MHz low power
  • Power tool and battery management with dual-bank Flash
  • Health and wellness monitoring with SRAM parity check
Alternative Models: What chips are recommended as replacements for STM32G070KBT6
Model Manufacturer Key Difference
STM32G071KBT6 ST Same + op-amp, comparators
STM32G070CBT6 ST Same, 48-LQFP package
STM32F070CBT6 ST Cortex-M0, 48MHz, older series
LPC824M201JHI33 NXP M0+, 30MHz, 33-HVQFN
SAMD21G18A-AUT Microchip M0+, 48MHz, 48-TQFP

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1