Opens in a new tab

STM32L052C8T6

Cortex-M0+ 32MHz ultra-low-power MCU, 64KB Flash, USB FS, 0.4uA standby, LQFP-48

14279

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L052C8T6

Package:

LQFP-48 (7.00 x 7.00 x 1.40 mm, 0.50mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32L052C8T6 from STMicroelectronics is an ultra-low-power Cortex-M0+ MCU with 64KB Flash, 8KB SRAM, and 12-bit ADC in LQFP-48. With multiple low-power modes down to 0.4uA, it targets battery-powered and energy-harvesting applications.

Key Specifications

Core ARM Cortex-M0+, 32 MHz
Flash Memory 64 KB
SRAM 8 KB + 2KB EEPROM
ADC 12-bit, 1.14 MSPS
DAC 1 x 12-bit
Communication USB 2.0 FS, 2x USART, 2x SPI, 2x I2C
Supply Voltage 1.65 V to 3.6 V
Standby Current 0.4 uA (typical)
Operating Temperature -40C to +85C

Features

  • 0.4uA standby current with RTC for ultra-long battery life
  • 64KB Flash with 8KB SRAM and 2KB true EEPROM emulation
  • USB 2.0 full-speed device with crystal-less USB oscillator
  • 12-bit ADC at 1.14MSPS and 12-bit DAC for analog processing
  • Cortex-M0+ core at 32MHz for energy-efficient processing
  • Multiple low-power modes: Sleep, Stop, Standby with fast wake-up

Applications

  • Wearable devices and fitness trackers with 0.4uA standby
  • Wireless sensor nodes and energy-harvesting systems
  • Portable medical devices with USB connectivity
  • Smart meters and building automation sensors
Product Introduction: STM32L052C8T6 Product Introduction

The STM32L052C8T6 from STMicroelectronics is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core operating at up to 32MHz in an LQFP-48 package. The device is part of the STM32L0 series, specifically optimized for battery-powered and energy-harvesting applications with multiple low-power modes. In Standby mode with RTC, the device draws only 0.4uA typical, enabling years of operation from a coin cell. In Stop mode with RTC, current is approximately 0.8uA with full SRAM and register retention and 3.5us wake-up time. The 64KB Flash and 8KB SRAM provide adequate code and data space for typical low-power applications. An additional 2KB of true EEPROM emulation area allows storage of calibration data and configuration without Flash wear concerns. The 12-bit ADC at 1.14MSPS with hardware oversampling supports precise analog measurement. A 12-bit DAC enables analog waveform generation. USB 2.0 full-speed device capability with internal 48MHz crystal-less oscillator simplifies USB design. Communication interfaces include two USARTs, two SPIs, and two I2Cs for sensor and actuator connectivity.

Working Principle: STM32L052C8T6 Working Principle

The STM32L052C8T6 operates on the ARM Cortex-M0+ core with optimized power management. (1) Core: The Cortex-M0+ is a 2-stage pipeline processor optimized for low power and low gate count, executing Thumb instructions. The 32MHz maximum clock provides adequate processing for sensor acquisition, data processing, and communication protocols. (2) Power Modes: Run mode operates at full speed with all peripherals. Sleep mode stops the CPU but keeps peripherals running. Low-Power Run mode reduces the CPU clock to below 2MHz with the internal MSI oscillator, drawing approximately 60uA/MHz. Stop mode halts all clocks and the CPU, retaining SRAM and registers with sub-microamp current. Standby mode powers down everything except the RTC, backup registers, and wakeup logic, drawing 0.4uA. (3) Voltage Scaling: Three voltage ranges (Range 1/2/3) scale the internal regulator output to match the required performance, reducing power at lower clock speeds. (4) USB: The internal 48MHz oscillator eliminates the external crystal for USB, saving BOM cost and PCB space.

Pin Description: STM32L052C8T6 Pin Definition and Functions
Pin Group Count Function
PORTA 12 GPIO, USART, SPI, I2C, USB, ADC, DAC, TIM
PORTB 12 GPIO, USART, SPI, I2C, TIM, ADC
PORTC 8 GPIO, USART, TIM, ADC
PORTD 2 GPIO
VDD/VSS Multiple Power supply and ground
VBAT 1 Battery backup for RTC
NRST 1 Reset (active low)
BOOT0 1 Boot mode selection
Application Scenarios: In which products and applications is STM32L052C8T6 used
  • Wearable devices and fitness trackers with 0.4uA standby and USB
  • Wireless sensor nodes and energy-harvesting systems at 60uA/MHz
  • Portable medical devices with USB FS and 12-bit ADC/DAC
  • Smart meters and building automation sensors with EEPROM emulation
Alternative Models: What chips are recommended as replacements for STM32L052C8T6
Manufacturer Part Number Package Notes
ST STM32L052K8T6 LQFP-32 Same, 32-pin smaller
ST STM32L072CZT6 LQFP-48 32MHz, 128KB, USB FS
Silicon Labs EFM32TG11B120F48G-EQFP48 QFP-48 Gecko, 48MHz, low power
Nordic nRF52810-QCAA QFN-48 Cortex-M4, BLE 5.0

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1