Opens in a new tab

STM32L052K6U6

Ultra-low-power Cortex-M0+ MCU, 32KB Flash, 8KB RAM, USB, ADC, DAC, UFQFPN-32

9340

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L052K6U6

Package:

UFQFPN-32 (5 x 5 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32L052K6U6 is an ultra-low-power ARM Cortex-M0+ microcontroller from STMicroelectronics with 32KB Flash, 8KB RAM, 2KB EEPROM, USB 2.0 crystal-less, 12-bit ADC, DAC, and touch sensing in a 32-pin UFQFPN (5x5mm) package.

Key Specifications

Core ARM Cortex-M0+ (32-bit)
Max Clock Speed 32 MHz
Flash Memory 32 KB (with ECC)
RAM 8 KB
Data EEPROM 2 KB (with ECC)
USB 2.0 crystal-less with LPM
ADC 12-bit, 1.14 Msps, up to 10 channels
DAC 12-bit, 1 channel
Comparators 2 ultra-low-power with window mode
Communication 2x USART, 1x LPUART, 2x I2C, 1x SPI, USB
Supply Voltage 1.65 V to 3.6 V
Run Current 88 µA/MHz
Standby Mode 0.27 µA
Operating Temperature -40°C to +85°C
Package UFQFPN-32 (5 x 5 mm)

Features

  • Ultra-low-power: 0.27 µA standby, 0.4 µA stop, 88 µA/MHz run
  • Crystal-less USB 2.0 with battery charging detection
  • 12-bit ADC with hardware oversampling
  • 12-bit DAC with output buffer
  • 2KB data EEPROM with ECC (unique in class)
  • Up to 24 capacitive touch sensing channels
  • Pre-programmed bootloader (USART/SPI)
  • True random number generator (RNG)

Applications

  • USB peripherals and human interface devices
  • Portable medical instruments
  • Smart meters and energy harvesting
  • Touch-enabled user interfaces
  • Industrial sensors and actuators
Product Introduction: STM32L052K6U6 Product Introduction

The STM32L052K6U6 is an ultra-low-power microcontroller from STMicroelectronics based on the ARM Cortex-M0+ 32-bit RISC core operating at up to 32 MHz. It integrates 32KB Flash with ECC, 8KB SRAM, and a unique 2KB data EEPROM with ECC. The device features a crystal-less USB 2.0 interface with battery charging detection and Link Power Management, a 12-bit 1.14 Msps ADC with hardware oversampling, a 12-bit DAC, two ultra-low-power comparators, and up to 24 capacitive touch sensing channels. Multiple communication interfaces include 2 USARTs, 1 LPUART, 2 I2C, and SPI. Ultra-low-power modes achieve 0.27 µA standby and 0.4 µA stop current with sub-5 µs wakeup.

Working Principle: STM32L052K6U6 Working Principle

The STM32L052K6U6 is built on ST ultra-low-power platform with optimized power management. The Cortex-M0+ core executes Thumb instructions at 0.95 DMIPS/MHz with a 2-stage pipeline and optional MPU for memory protection. The voltage regulator adapts internally to minimize power consumption across the 1.65-3.6V range. Multiple clock sources include a 16 MHz HSI RC (plus or minus 1%), a 37 kHz LSI, and a multi-speed MSI (65 kHz to 4.2 MHz) that can be trimmed using LSE. The USB interface uses an internal 48 MHz RC oscillator calibrated from USB SOF packets, eliminating the need for an external crystal. Low-power modes progressively disable clock domains: Stop mode keeps SRAM and registers while stopping the CPU clock (0.4 µA); Standby mode powers down everything except the RTC and backup registers (0.27 µA). The on-chip EEPROM uses a charge pump for write/erase operations, providing byte-level write capability without Flash page-erase overhead.

Pin Description: STM32L052K6U6 Pin Definition and Functions
Pin Group Function Description
PA0-PA7 GPIO/ADC/Touch Port A with ADC, touch, USART2, SPI1 alternate functions
PB0-PB7 GPIO/ADC/I2C Port B with ADC, I2C1, I2C2, LPUART1 functions
PC14-PC15 GPIO/OSC Port C with LSE crystal oscillator connections
NRST System Reset input (active low)
BOOT0 System Boot mode selection
VDD/VSS Power Supply and ground (multiple pins)
VDDUSB Power USB transceiver supply (3.0-3.6V)
Application Scenarios: In which products and applications is STM32L052K6U6 used
  • USB Peripherals: Crystal-less USB 2.0 with LPM simplifies HID, CDC, and custom USB device designs
  • Portable Medical: 0.27 µA standby and 88 µA/MHz run current extend battery life in glucose monitors and pulse oximeters
  • Touch UI Devices: 24 capacitive sensing channels add touch buttons/sliders without external touch controller
  • Data Logging: 2KB on-chip EEPROM stores calibration and configuration data without Flash page-erase complexity
  • Smart Sensors: Low-power modes, 12-bit ADC, DAC, and compact UFQFPN package fit wireless sensor nodes
Alternative Models: What chips are recommended as replacements for STM32L052K6U6
Model Manufacturer Key Difference Package Specs
STM32L052K8U6 ST 64KB Flash version, same package – –
STM32L051K6U6 ST Same without USB and DAC – –
STM32L031K6U6 ST 32KB Flash, no USB, lower cost – –
SAMD21E15A-MUT Microchip 48MHz M0+, 32KB Flash, TQFP-32 – –
LPC824M201JHI33 NXP 30MHz M0+, 32KB Flash, HVQFN-33 – –

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1