Opens in a new tab

STM32L071RZT6

Ultra-low-power Cortex-M0+ MCU, 32MHz, 192kB Flash, 6kB EEPROM, 0.29µA Standby, LQFP-64

5410

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L071RZT6

Package:

LQFP-64 (10 x 10 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM32L071RZT6 from STMicroelectronics is an ultra-low-power Arm Cortex-M0+ microcontroller operating at 32 MHz with 192 kB of Flash memory and 20 kB of SRAM. It features 6 kB of data EEPROM with ECC and is packaged in a 64-pin LQFP. The device offers extensive low-power modes including 0.29 µA Standby and 0.43 µA Stop mode.

Key Specifications

Core ARM Cortex-M0+ (32-bit)
Max Clock Frequency 32 MHz
Flash Memory 192 kB (with ECC, dual-bank read-while-write)
SRAM 20 kB
Data EEPROM 6 kB (with ECC)
Supply Voltage 1.65V to 3.6V
Standby Mode 0.29 µA (3 wakeup pins)
Stop Mode 0.43 µA (16 wakeup lines)
Run Mode 93 µA/MHz
Operating Temperature -40°C to +125°C
Package LQFP-64 (10 x 10 mm)
I/O Pins 52

Features

  • Ultra-low-power platform with 5 µs wakeup from Flash
  • 12-bit ADC at 1.14 Msps with hardware oversampling
  • Two ultra-low-power comparators
  • Low-power UART (LPUART) for always-on communication
  • Low-power timer (LPTIM) for autonomous operation
  • Up to 3x I2C, 2x SPI, 1x I2S, 4x USART, 1x LPUART
  • Real-time clock (RTC) with calendar and alarm
  • Pre-programmed bootloader (USART, I2C, SPI)
  • 84 fast I/Os (78 are 5V tolerant)

Applications

  • Battery-powered IoT sensor nodes
  • Smart meters (water, gas, electricity)
  • Wearable health monitoring devices
  • Building automation and HVAC controllers
  • Portable medical instruments
  • Asset tracking and beaconing
Product Introduction: STM32L071RZT6 Product Introduction

The STM32L071RZT6 is an access line ultra-low-power microcontroller from STMicroelectronics, incorporating the Arm Cortex-M0+ 32-bit RISC core operating at 32 MHz. It features up to 192 kB of Flash program memory with ECC and dual-bank read-while-write capability, 6 kB of data EEPROM with ECC for non-volatile parameter storage, and 20 kB of RAM. The device provides exceptional power efficiency with 0.29 µA Standby mode, 0.43 µA Stop mode, and 93 µA/MHz in Run mode. A comprehensive set of power-saving modes, including a 5 µs wakeup time from Flash, enables the design of long-life battery-powered applications. The STM32L071RZT6 operates from 1.65V to 3.6V over a -40°C to +125°C temperature range.

Working Principle: STM32L071RZT6 Working Principle

The STM32L071RZT6 operates through four key subsystems:

1. Core & Memory: The Cortex-M0+ core runs at 32 MHz (0.95 DMIPS/MHz) with an MPU for application security. Flash memory supports ECC and dual-bank operation for read-while-write firmware updates. The 6 kB EEPROM with ECC provides reliable non-volatile storage for configuration data without external components. A 20-byte backup register set survives Standby mode.

2. Ultra-Low-Power Architecture: Multiple low-power modes are available: Run (93 µA/MHz), Sleep, Stop (0.43 µA with 16 wakeup lines, 0.86 µA with RTC and RAM retention), and Standby (0.29 µA with 3 wakeup pins). An internal voltage adaptation circuit optimizes power consumption. The 5 µs wakeup time from Flash enables frequent sleep cycles.

3. Analog Peripherals: A 12-bit ADC with 1.14 Msps sampling and hardware oversampling supports up to 16 channels, consuming only 41 µA at 10 ksps. Two ultra-low-power comparators enable threshold detection in Stop mode. An internal voltage reference and temperature sensor are also available.

4. Communication & Timing: The device includes 3x I2C, 2x SPI, 1x I2S, 4x USART, and a low-power UART (LPUART) for always-on communication at minimal current. A low-power timer (LPTIM) operates autonomously in Stop mode. The RTC with calendar and alarm provides timekeeping in all low-power modes.

Pin Description: STM32L071RZT6 Pin Definition and Functions
Pin Name Type Function
1 VBAT Power Battery backup for RTC and backup registers
2 PC13 I/O GPIO / RTC_OUT / RTC_TAMP
3 PC14 I/O GPIO / OSC32_IN
4 PC15 I/O GPIO / OSC32_OUT
5 VSS_IN Power Input ground (for VDD_IN)
6 VDD_IN Power Input supply (1.65–3.6V)
7 PH0 I/O GPIO / OSC_IN
8 PH1 I/O GPIO / OSC_OUT
9 NRST I/O Reset (active low)
10 PC0 I/O GPIO / ADC_IN10
12 PA0 I/O GPIO / WKUP1 / USART2_CTS / ADC_IN0
16 PA4 I/O GPIO / SPI1_NSS / USART2_CK / DAC_OUT
20 PA8 I/O GPIO / USART1_CK / TIM1_CH1
24 PA12 I/O GPIO / USART2_RX / SPI2_MOSI
31 PA15 I/O GPIO / SPI1_NSS / USART2_RX
32 PC10 I/O GPIO / USART3_TX / UART4_TX
37 VDDA Power Analog supply (1.65–3.6V)
38 VSSA Power Analog ground
44 BOOT0 Input Boot mode selection
48 VDD Power Digital supply (1.65–3.6V)
Application Scenarios: In which products and applications is STM32L071RZT6 used
  • Battery-powered IoT nodes: 0.29 µA Standby mode with 5 µs wakeup enables coin-cell operation for years in remote sensor applications
  • Smart meters: 6 kB EEPROM with ECC stores calibration and billing data without external memory; dual-bank Flash supports OTA firmware updates
  • Wearable devices: Low-power UART and LPTIM enable always-on activity monitoring at sub-µA current levels
  • Building automation: Multiple I2C/SPI/UART interfaces support sensor aggregation with 41 µA ADC conversion at 10 ksps
  • Portable medical instruments: 12-bit ADC with hardware oversampling and ultra-low-power comparators for vital sign monitoring
Alternative Models: What chips are recommended as replacements for STM32L071RZT6
Manufacturer Part Number Package Notes
STMicroelectronics STM32L071RBT6 LQFP-64 128 kB Flash version
STMicroelectronics STM32L071VZT6 LQFP-100 Same features, 100-pin package
STMicroelectronics STM32L072RZT6 LQFP-64 Adds USB FS device and AES
STMicroelectronics STM32L081RZT6 LQFP-64 Adds AES-128 hardware crypto
NXP LPC812M101JD20 SOIC-20 Cortex-M0+, 16 kB Flash, smaller package
Silicon Labs EFM32TG11B120F128GM48 QFN-48 Cortex-M0+, 128 kB Flash, low-power

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1