Opens in a new tab

STM32L151C8T6

Cortex-M3 32MHz ultra-low-power MCU, 64KB Flash, USB FS, LCD, 0.28uA standby, LQFP-48

11335

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L151C8T6

Package:

LQFP-48 (7.00 x 7.00 x 1.40 mm, 0.50mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32L151C8T6 from STMicroelectronics is an ultra-low-power Cortex-M3 MCU with 64KB Flash, 10KB SRAM, 12-bit ADC and DAC in LQFP-48. With multiple low-power modes down to 0.28uA, it targets long-life battery applications.

Key Specifications

Core ARM Cortex-M3, 32 MHz
Flash Memory 64 KB
SRAM 10 KB + 4KB EEPROM
ADC 12-bit, 1 MSPS
DAC 2 x 12-bit
Communication 3x USART, 2x SPI, 2x I2C, USB FS
Standby Current 0.28 uA (typical)
Operating Temperature -40C to +85C

Features

  • 0.28uA standby current with RTC for ultra-long battery operation
  • 64KB Flash with 10KB SRAM and 4KB true EEPROM
  • 12-bit ADC at 1MSPS and two 12-bit DACs for analog processing
  • USB 2.0 full-speed device with crystal-less internal oscillator
  • Multiple low-power modes with fast wake-up (under 10us from Stop)
  • LCD controller for segment display driving (up to 4×40 segments)

Applications

  • Smart meters with LCD display and long battery life
  • Portable medical devices with dual DAC and USB
  • Building automation sensors and thermostats
  • Industrial handheld instruments with EEPROM data logging
Product Introduction: STM32L151C8T6 Product Introduction

The STM32L151C8T6 from STMicroelectronics is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M3 core operating at up to 32MHz in an LQFP-48 package. Part of the STM32L1 series, the device offers significantly more processing power than the Cortex-M0+ STM32L0 series while maintaining excellent low-power characteristics. The 64KB Flash and 10KB SRAM provide adequate code and data space, while 4KB of true EEPROM enables reliable storage of calibration data and configuration parameters without Flash wear concerns. Two 12-bit DACs enable dual analog output channels, useful for waveform generation and control loops. An integrated LCD controller drives segment displays with up to 4×40 segments, ideal for metering and instrumentation applications. The 12-bit ADC at 1MSPS with hardware oversampling supports precise analog measurement. USB 2.0 full-speed device with crystal-less internal 48MHz oscillator simplifies USB connectivity. Low-power modes include Sleep (6.4uA), Stop (0.5uA with RTC), and Standby (0.28uA with RTC), with Stop-to-Run wake-up in under 10us.

Working Principle: STM32L151C8T6 Working Principle

The STM32L151C8T6 operates on the ARM Cortex-M3 core with optimized low-power design. (1) Core: The Cortex-M3 provides higher performance than M0+ cores with hardware divide, bit-band operation, and more efficient interrupt handling, while the 32MHz clock keeps dynamic power consumption low. (2) Voltage Regulator: An internal voltage regulator provides three output ranges. Range 1 (1.8V) supports full 32MHz operation. Range 2 (1.5V) supports up to 16MHz with lower power. Range 3 (1.2V) supports up to 4MHz with minimum power. The range is selected based on the required clock speed. (3) Low-Power Modes: Sleep mode stops the CPU while peripherals run. Stop mode halts all clocks, retaining SRAM and register contents. LP Stop mode additionally reduces the voltage regulator output for sub-microamp current. Standby mode powers down everything except the RTC and wakeup logic. (4) EEPROM: The 4KB EEPROM area uses a dedicated charge pump and write mechanism separate from the Flash, supporting 100K erase/write cycles and 10-year data retention at 85C. (5) LCD Controller: The integrated LCD controller generates the segment and common drive waveforms for direct LCD glass connection, eliminating external display drivers.

Pin Description: STM32L151C8T6 Pin Definition and Functions
Pin Group Count Function
PORTA 12 GPIO, USART, SPI, I2C, USB, ADC, DAC, TIM
PORTB 12 GPIO, USART, SPI, I2C, TIM, ADC, LCD
PORTC 8 GPIO, USART, TIM, ADC, LCD
PORTD 2 GPIO, LCD
PORTE 2 GPIO, LCD
VDD/VSS Multiple Power supply and ground
VBAT 1 Battery backup for RTC
Application Scenarios: In which products and applications is STM32L151C8T6 used
  • Smart meters with LCD display and 0.28uA standby battery life
  • Portable medical devices with dual DAC and USB FS connectivity
  • Building automation sensors and thermostats with EEPROM storage
  • Industrial handheld instruments with Cortex-M3 processing at low power
Alternative Models: What chips are recommended as replacements for STM32L151C8T6
Manufacturer Part Number Package Notes
ST STM32L152C8T6 LQFP-48 Same + LCD segment driver
ST STM32L151CBT6 LQFP-48 128KB Flash version
ST STM32L052C8T6 LQFP-48 Cortex-M0+, lower cost
Silicon Labs EFM32LG230F256G-EQFP48 QFP-48 Gecko, LCD, 64KB RAM

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1