Opens in a new tab

STM32L476JGY6TR

Ultra-low-power Cortex-M4, 80MHz, 1MB Flash, 128KB RAM, USB, UFBGA-72

9046

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L476JGY6TR

Package:

UFBGA-72 (4.50 x 4.50 x 0.60 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32L476JGY6TR from STMicroelectronics is an ultra-low-power ARM Cortex-M4 32-bit MCU with FPU, 1 MB Flash, 128 KB SRAM, USB OTG FS, LCD, and analog peripherals in a compact UFBGA-72 package. The 1 MB Flash variant offers maximum code capacity for complex ultra-low-power applications.

Key Specifications

Core ARM Cortex-M4 with FPU @ 80 MHz
Flash Memory 1 MB (dual-bank)
SRAM 128 KB (96 KB SRAM1 + 32 KB SRAM2)
Supply Voltage 1.71 V to 3.6 V
Operating Temperature -40°C to +85°C
Package UFBGA-72 (4.5 x 4.5 mm)

Features

  • 1 MB dual-bank Flash with read-while-write capability
  • Ultra-low-power: 30 nA Shutdown, 100 µA/MHz Run
  • 3 x 12-bit ADC, 2 x 12-bit DAC, 2 op-amps, 2 comparators
  • USB OTG FS, CAN 2.0B, LCD controller
  • Compact UFBGA-72 for space-constrained designs

Applications

  • Wearable health monitors
  • Smart meters with large firmware
  • Portable medical devices
  • Industrial wireless sensor nodes
  • Consumer electronics with LCD display
Product Introduction: STM32L476JGY6TR Product Introduction

The STM32L476JGY6TR from STMicroelectronics is the maximum-Flash-density variant of the STM32L476 ultra-low-power microcontroller family, featuring 1 MB of dual-bank Flash memory and 128 KB of SRAM in a compact 4.5 x 4.5 mm UFBGA-72 package. The ARM Cortex-M4 core with FPU operates at up to 80 MHz with 100 DMIPS performance. The device integrates the full STM32L476 peripheral set including three 12-bit ADCs at 5 Msps, two 12-bit DACs, two operational amplifiers with PGA, two ultra-low-power comparators, USB OTG Full-Speed, LCD controller, DFSDM, and 18 communication interfaces. The FlexPowerControl architecture enables ultra-low-power modes down to 30 nA in Shutdown. The 1 MB Flash supports large application code bases with over-the-air firmware update capability enabled by the dual-bank read-while-write architecture.

Working Principle: STM32L476JGY6TR Working Principle

The STM32L476JGY6TR shares the same core architecture as the STM32L476RET6, with the ARM Cortex-M4 core with FPU and ART Accelerator for zero-wait-state Flash execution at 80 MHz. The 1 MB Flash is organized as two 512 KB banks supporting concurrent read from one bank while erasing or programming the other bank, enabling firmware updates without interrupting application execution. The UFBGA-72 package provides 72 pins in a 4.5 x 4.5 mm footprint with 0.5 mm ball pitch, offering maximum I/O density for space-constrained designs. The ball map provides access to GPIO ports A through E with full alternate function mapping for all peripherals.

Pin Description: STM32L476JGY6TR Pin Definition and Functions
Pin Group Count Function
VDD/VDDA/VBAT/VSS 12 Power supply and ground (digital, analog, backup)
PORTA- PORTE 51 GPIO with alternate functions (ADC, DAC, TIM, USART, SPI, I2C, USB, CAN, LCD, SAI, DFSDM, OPAMP, COMP)
NRST 1 Reset input
BOOT0 1 Boot mode selection
OSC 4 HSE and LSE oscillator connections
Other 3 Ball configuration and reserved
Application Scenarios: In which products and applications is STM32L476JGY6TR used
  • Wearable Health Devices: Multi-sensor health monitors with large firmware for BLE stack, DSP algorithms, and over-the-air updates
  • Smart Metering: Multi-protocol utility meters requiring 1 MB Flash for protocol stacks, data logging, and encryption
  • Portable Medical: Battery-powered diagnostic devices with LCD interface and USB data transfer
  • Industrial IoT Gateway: Wireless sensor hub with Sub-GHz or BLE radio, DFSDM precision measurement, and CAN bus
  • Consumer Wearables: Smartwatch and fitness tracker with LCD, touch sensing, and multi-sensor fusion
Alternative Models: What chips are recommended as replacements for STM32L476JGY6TR
Model Manufacturer Flash RAM Package Notes
STM32L476RET6 ST 512 KB 128 KB LQFP-64 Half Flash, larger package
STM32L486JGY6TR ST 1 MB 128 KB UFBGA-72 AES-256 hardware crypto
STM32L4R9ZIJ6 ST 2 MB 640 KB BGA-144 STM32L4+, much more Flash/RAM
nRF52840 Nordic 1 MB 256 KB QFN-73 BLE SoC with integrated radio
SAMR34J18B Microchip 256 KB 40 KB QFN-48 Sub-GHz LoRa + Cortex-M0+

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1