Opens in a new tab

STM32L476VET6

80MHz Cortex-M4 MCU with FPU, 512kB Flash, 128kB SRAM, USB OTG, LCD, ultra-low-power, LQFP-100

6834

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L476VET6

Package:

LQFP-100 (14 x 14 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32L476VET6 from STMicroelectronics is an ultra-low-power Arm Cortex-M4 32-bit microcontroller with FPU operating at up to 80 MHz, featuring 512 kB flash, 128 kB SRAM, USB OTG FS, LCD controller, and rich analog peripherals in a 100-pin LQFP package. With FlexPowerControl enabling 30 nA shutdown mode and 100 μA/MHz run mode, it is optimized for battery-powered and energy-harvesting applications requiring high performance and extended battery life.

Key Specifications

CPU Core Arm Cortex-M4 with FPU, 100 DMIPS
Max Clock Speed 80 MHz
Flash Memory 512 kB (dual-bank, read-while-write)
SRAM 128 kB (incl. 32 kB with parity)
ADC 3x 12-bit, 5 Msps (up to 16-bit oversampled)
DAC 2x 12-bit
I/O Pins 82 (most 5V tolerant)
Supply Voltage 1.71 V to 3.6 V
Operating Temperature -40°C to +85°C

Features

  • Ultra-low-power FlexPowerControl: 30 nA shutdown, 120 nA standby, 100 μA/MHz run
  • Dual-bank flash with read-while-write capability for safe firmware updates
  • ART Accelerator enabling zero-wait-state execution from flash at 80 MHz
  • Rich analog: 3x ADC, 2x DAC, 2x op-amps, 2x comparators, voltage reference buffer
  • USB OTG 2.0 full-speed with LPM and BCD
  • LCD controller 8×40/4×44 with internal step-up converter

Applications

  • Wearable devices and health monitors with LCD display
  • Industrial sensors and metering with ultra-low-power modes
  • Portable medical instruments and data loggers
  • IoT edge nodes with USB connectivity
  • Consumer electronics with battery-powered operation
Product Introduction: STM32L476VET6 Product Introduction

The STM32L476VET6 is an ultra-low-power microcontroller from STMicroelectronics based on the high-performance Arm Cortex-M4 32-bit RISC core with floating-point unit (FPU) operating at up to 80 MHz. The Cortex-M4 core supports all Arm single-precision data-processing instructions, DSP instructions, and a memory protection unit (MPU). The device offers 512 kB dual-bank flash with read-while-write, 128 kB SRAM including 32 kB with hardware parity check, and an external memory interface for SRAM, PSRAM, NOR, and NAND. Rich analog peripherals include three 12-bit ADCs at 5 Msps, two 12-bit DACs, two operational amplifiers with built-in PGA, two comparators, and an internal voltage reference buffer. The integrated LCD controller supports 8×40 or 4×44 with an internal step-up converter.

Working Principle: STM32L476VET6 Working Principle

The STM32L476VET6 architecture centers on the Cortex-M4F core with a three-stage pipeline and single-cycle DSP instructions. (1) Memory Subsystem: The ART Accelerator uses a 64-line direct-mapped instruction cache and a prefetch queue to enable zero-wait-state flash execution at 80 MHz. Dual-bank flash allows read-while-write for safe firmware updates. (2) Power Management: FlexPowerControl provides multiple low-power modes — Shutdown (30 nA), Standby (120 nA), Stop2 (1.1 μA), and Low-Power Run — with fast 4 μs wakeup from Stop mode. An optional external SMPS supply reduces run current to 39 μA/MHz. (3) Analog Signal Chain: Three 12-bit SAR ADCs with hardware oversampling achieve up to 16-bit effective resolution. Two rail-to-rail op-amps with configurable internal feedback serve as PGA, filter, or follower stages. (4) Clock System: Multiple clock sources including 4-48 MHz HSE, 32 kHz LSE, 16 MHz HSI, and 32 kHz LSI, with three PLLs for system, USB, and audio clock generation.

Pin Description: STM32L476VET6 Pin Definition and Functions
Pin Name Type Function
1 VBAT Power Battery backup supply for RTC and backup registers
2 PC13 I/O GPIO / RTC_AF1 / WKUP2
3 PC14/OSC32_IN I/O GPIO / LSE oscillator input
4 PC15/OSC32_OUT I/O GPIO / LSE oscillator output
5 PH0/OSC_IN I/O GPIO / HSE oscillator input
6 PH1/OSC_OUT I/O GPIO / HSE oscillator output
7 NRST Input System reset (active low)
8 PC0 I/O GPIO / ADC1_IN1 / ADC2_IN1 / ADC3_IN1
Application Scenarios: In which products and applications is STM32L476VET6 used
  • Wearable health monitors with LCD display and ultra-low-power battery operation
  • Industrial sensor nodes with multi-channel ADC data acquisition and USB connectivity
  • Smart meters and data loggers leveraging RTC, low-power modes, and LCD controller
  • Portable medical instruments requiring precision analog front-end and FPU signal processing
  • Consumer electronics with touch sensing, USB, and energy-efficient Cortex-M4 performance
Alternative Models: What chips are recommended as replacements for STM32L476VET6
Manufacturer Part Number Package Notes
STMicroelectronics STM32L475VET6 LQFP-100 No LCD, lower cost option
STMicroelectronics STM32L476ZGT6 LQFP-144 1MB Flash, more I/O
NXP LPC54608J512ET180 LQFP-100 180MHz Cortex-M4, Ethernet
Microchip SAM4SD32CA-CU LQFP-100 120MHz Cortex-M4, dual-bank
Silicon Labs EFM32GG11B840F2048QFP100 LQFP-100 80MHz, 2MB Flash, LCD

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1