Opens in a new tab

Home » Integrated Circuits ICs, MOSFETs » SUP53P06-20-E3

SUP53P06-20-E3

P-ch 60V 20A MOSFET, 20mOhm RDS(on), D2PAK, load switch and power management

5269

Effective Inventory

Image for reference only

Manufacturer Part:

SUP53P06-20-E3

Package:

D2PAK / TO-263-3 (10.4 x 9.35 x 4.6mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SUP53P06-20-E3 from Vishay Siliconix is a P-channel power MOSFET rated at -60V VDS and -20A ID with low 20mOhm RDS(on) at VGS=-10V. Designed for load switching and power management in a D2PAK (TO-263) package.

Key Specifications

VDS (Max) -60V
ID (Continuous, TC=25C) -20A
RDS(on) Max @ VGS=-10V 20 mOhm
RDS(on) Max @ VGS=-4.5V 30 mOhm
VGS(th) -1.0V to -3.0V
Qg (Typical) 48 nC
PD (TC=25C) 62.5W
Operating Temperature -55 to 175 C
Package D2PAK (TO-263-3)

Features

  • Low 20mOhm RDS(on) for high-efficiency switching
  • -60V drain-source voltage rating
  • Logic-level gate threshold (-1.0 to -3.0V)
  • 100% avalanche tested
  • Trench MOSFET technology

Applications

  • Battery disconnect switches
  • Load switching and power routing
  • Reverse polarity protection
  • Motor H-bridge drivers
  • Power supply OR-ing
Product Introduction: SUP53P06-20-E3 Product Introduction

The SUP53P06-20-E3 from Vishay Siliconix is a P-channel trench MOSFET rated at -60V and -20A with 20mOhm maximum on-resistance at -10V gate drive. The low RDS(on) and high current capability make it ideal for battery disconnect switches, load switching, and reverse polarity protection in automotive and industrial systems. The D2PAK package provides excellent thermal dissipation (62.5W at TC=25C) and is suitable for high-power surface-mount applications. Logic-level gate threshold (-1.0 to -3.0V) enables direct drive from 3.3V or 5V microcontrollers.

Working Principle: SUP53P06-20-E3 Working Principle

The SUP53P06-20-E3 operates as a P-channel enhancement-mode power MOSFET using Vishay’s trench technology. **P-Channel Operation**: Unlike N-channel MOSFETs, the P-channel device turns ON when the gate is pulled below the source (negative VGS for P-ch). This makes it naturally suited for high-side switching – the MOSFET sits between the supply and the load, and a logic-low signal turns it ON. **Low RDS(on)**: Trench gate technology creates vertical channels with high cell density, achieving 20mOhm on-resistance. This minimizes conduction losses (I2R) during load switching. **Body Diode**: The intrinsic body diode between drain and source can conduct reverse current, which is useful in applications like reverse polarity protection where the diode blocks current in the wrong direction. **High-Side Switch**: P-channel MOSFETs are preferred for high-side switching because they don’t require a gate voltage above the supply rail (unlike N-channel high-side switches that need bootstrapped gate drive). A simple logic-level signal referenced to the supply rail controls the switch.

Pin Description: SUP53P06-20-E3 Pin Definition and Functions
Pin Name Description
1 Gate Gate control terminal
2 Drain Drain terminal (connected to tab)
3 Source Source terminal
Tab Drain Thermal tab, electrically connected to Drain
Application Scenarios: In which products and applications is SUP53P06-20-E3 used
  • Battery Disconnect: High-side switch for Li-ion battery pack disconnect in EVs and UPS
  • Reverse Protection: P-channel MOSFET as ideal diode for reverse polarity protection
  • Load Switch: Power routing between multiple supply sources in battery-powered systems
  • Motor H-Bridge: P-channel high-side + N-channel low-side in half-bridge configurations
  • Power OR-ing: Redundant power supply selection using P-channel OR-ing MOSFETs
Alternative Models: What chips are recommended as replacements for SUP53P06-20-E3
Model Manufacturer Key Difference
FQP27P06 onsemi -60V, -27A, 35mOhm, TO-220
IRFR5305TRPBF Infineon -55V, -17A, 30mOhm, DPAK
AOD4185 Alpha & Omega -40V, -50A, 7mOhm, D2PAK
SI4435DY-T1-E3 Vishay -30V, -8.2A, 20mOhm, SO-8
FDS4559 onsemi -30V, -12A, 12mOhm, SO-8

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1