Opens in a new tab

TAS6424MQDKQRQ1

75W 4-ch Class-D audio amp, automotive, HSSOP-56, TI

13535

Effective Inventory

Image for reference only

Manufacturer Part:

TAS6424MQDKQRQ1

Package:

HSSOP-56 (PowerPAD, 12.5 x 6.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TAS6424MQDKQRQ1 from Texas Instruments is an AEC-Q100 qualified 4-channel Class-D digital-input audio amplifier for automotive applications. Delivering 75W per channel into 4 Ohm from 25V supply, it features I2S/TDM digital input, I2C diagnostics, and comprehensive load fault detection including open/short circuit and output-to-battery shorts.

Key Specifications

Channels 4 BTL (or parallel PBTL)
Supply Voltage 4.5 – 26.4 V (40V load dump tolerant)
Output Power 75W/ch @ 4 Ohm, 25V, 10% THD
THD+N <0.03% @ 1W, 4 Ohm
Audio Input I2S or TDM (4/8 channel)
Control Interface I2C (4 address options)
Switching Frequency Up to 2.1 MHz
Protection OCP, OTP, UVP, OVP, DC offset, short circuit
Load Diagnostics Open/short, output-to-battery/ground short, AC diagnostic
Package HSSOP-56 (DKQ) with PowerPAD
AEC-Q100 Qualified

Features

  • AEC-Q100 automotive qualified Class-D amplifier
  • 75W per channel at 4 Ohm from 25V supply
  • Digital audio input: I2S or TDM (up to 8 channels)
  • I2C diagnostics with load fault detection
  • 40V load dump tolerance for automotive bus
  • DC offset protection for speaker safety
  • Switching frequency above AM band eliminates interference
  • PowerPAD heatsink pad for thermal management

Applications

  • Automotive head unit audio amplification
  • External amplifier modules for car audio
  • Premium automotive sound systems
  • Electric vehicle audio systems
  • Automotive emergency notification speakers
Product Introduction: TAS6424MQDKQRQ1 Product Introduction

The TAS6424MQDKQRQ1 from Texas Instruments is an AEC-Q100 qualified 4-channel Class-D digital-input audio amplifier designed for automotive applications. Delivering 75W per channel into 4 Ohm from a 25V supply with THD+N below 0.03%, it provides premium sound quality for car audio systems. The I2S/TDM digital audio input eliminates the need for external DACs, while I2C-controlled diagnostics detect speaker open/short circuits and output-to-battery faults. The 40V load dump tolerance ensures robustness on the automotive power bus. The HSSOP-56 PowerPAD package provides efficient thermal dissipation in space-constrained automotive modules.

Working Principle: TAS6424MQDKQRQ1 Working Principle

The TAS6424MQDKQRQ1 uses a bridge-tied-load (BTL) Class-D topology where each channel consists of two N-channel MOSFET half-bridges driven in anti-phase. The digital audio input (I2S or TDM) is processed by an internal DSP that performs interpolation, sigma-delta modulation, and power stage drive. The 2.1 MHz switching frequency can be set above the AM broadcast band to avoid interference with car radios. The I2C diagnostic engine continuously monitors the output pins using AC and DC measurements, detecting open circuits (up to 6 kOhm), short circuits, and output-to-battery/ground faults without audible pops. DC offset protection disables outputs if a DC voltage exceeding the threshold is detected on any channel, protecting speakers from damage.

Pin Description: TAS6424MQDKQRQ1 Pin Definition and Functions
Pin Name Type Function
1 SDOUT Output I2C data output / fault status
5 MCLK Input Master clock input
10 LRCLK Input I2S/LJ left-right clock
12 SDIN1 Input Serial audio data input 1
15 SCL Input I2C clock
16 SDA I/O I2C data
20 OUT1+ Output Bridge-tied-load output 1 positive
21 OUT1- Output Bridge-tied-load output 1 negative
28 PVDD Power Power supply 4.5-26.4V
40 BST1 Power Bootstrap capacitor for channel 1
50 FAULTZ Output Global fault output (active low)
55 PDN Input Power down (active low)
Application Scenarios: In which products and applications is TAS6424MQDKQRQ1 used
  • Automotive head unit audio amplification
  • External amplifier modules for car audio
  • Premium automotive sound systems
  • Electric vehicle audio systems
  • Automotive emergency notification speakers
Alternative Models: What chips are recommended as replacements for TAS6424MQDKQRQ1
Manufacturer Part Number Package Notes
TI TAS6422-Q1 HSSOP-44 2-channel automotive Class-D
Infineon MA5332MS VQFN-48 2x65W automotive Class-D
NXP TFA9896 HVQFN Smart audio amplifier with speaker protection
TI TAS6424L-Q1 HSSOP-56 Lower power variant

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1