Product Overview
The TC33X-2-104E from Bourns is a 100kOhm 0.1W SMD cermet trimming potentiometer with top adjustment, 270-degree rotation, and 3mm open-frame package.
Key Specifications
| Type | SMD Cermet Trimming Potentiometer (Trimpot) |
| Resistance | 100 kOhm (104 code) |
| Resistance Tolerance | +/-25% |
| Power Rating | 0.1W at 70C |
| Maximum Voltage | 50V DC |
| Temperature Coefficient | +/-250 ppm/C |
| Adjustment Type | Top adjustment |
| Rotation | 270 degrees (+/-20 degrees) |
| Rotation Stops | Yes (-2 style with stops) |
| Resolution | Essentially infinite |
| Contact Resistance Variation | 5% max |
| Package | SMD (J-lead, 3 x 3.6 x 1.2mm) |
| Operating Temperature | -40C to +100C |
Features
- 3mm size meets EIA/EIAJ standard trimmer footprint
- Cermet resistive element for stability
- Recommended for reflow soldering
- Compatible with pick-and-place and auto-adjustment
- Voltage adjustment in power supplies
- Feedback network trimming
- Op-amp offset adjustment
- Timing circuit calibration
- LM317 adjustable regulator feedback trimmer with 100kOhm range for fine output voltage calibration in bench power supply
- Op-amp inverting gain trimming network where 100kOhm pot adjusts feedback ratio for precise calibration of measurement circuit
- Oscillator frequency calibration with 100kOhm trimmer in RC timing network, rotational stop preventing mis-adjustment during production
Applications
Product Introduction: TC33X-2-104E Product Introduction
The TC33X-2-104E from Bourns is a 100kOhm surface-mount cermet trimming potentiometer (Trimpot) in the industry-standard 3mm TC33 open-frame package. The X suffix denotes the top-adjustment style with J-lead termination, -2 indicates the rotational stop version (prevents over-rotation beyond the resistive element), 104 is the resistance code (10 x 10^4 = 100kOhm), and E indicates tape and reel packaging (2500 units per 7-inch reel). The cermet (ceramic-metal) resistive element provides good stability over temperature (+/-250 ppm/C) and time, with a power rating of 0.1W at 70C. The -2 rotational stop is preferred in production environments because it prevents the wiper from being driven beyond the resistive track, which could damage the element or create an open circuit. The top-adjustment configuration allows access from the component side of the PCB, making it suitable for post-assembly calibration. The 3mm footprint is the EIA/EIAJ standard, enabling compatibility with automated pick-and-place equipment and the Bourns H-90 adjustment tool. The essentially infinite resolution of the cermet element allows fine voltage adjustments.
Working Principle: TC33X-2-104E Working Principle
The TC33X-2-104E is a three-terminal variable resistor using a cermet (ceramic-metal composite) resistive element deposited on a ceramic substrate. A wiper contact slides along the resistive track when the adjustment screw is rotated, changing the effective resistance between the wiper terminal and each end terminal. In voltage divider mode, the resistive element forms a divider from terminal 1 to terminal 3, with the wiper (terminal 2) tapping off a variable fraction of the applied voltage. The 270-degree mechanical rotation corresponds to the wiper traveling from one end of the resistive track to the other. The -2 rotational stop uses a mechanical clutch that prevents the wiper from being rotated beyond the end of the resistive element, unlike the -1 style which allows continuous rotation. The cermet element consists of metallic particles (typically ruthenium oxide) dispersed in a glass-ceramic matrix, providing a continuous resistive path with essentially infinite resolution (no discrete steps as in digital potentiometers). The +/-25% resistance tolerance reflects the inherent variation in cermet thick-film deposition, but the relative adjustment resolution is much finer.
Pin Description: TC33X-2-104E Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CCW | Terminal | Counter-clockwise end of resistive element |
| 2 | Wiper | Terminal | Adjustable contact (output) |
| 3 | CW | Terminal | Clockwise end of resistive element |
Application Scenarios: In which products and applications is TC33X-2-104E used
Alternative Models: What chips are recommended as replacements for TC33X-2-104E
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| Bourns | TC33X-2-103E | SMD-3 | 10kOhm version |
| Bourns | TC33X-1-104E | SMD-3 | Continuous rotation (no stop) |
| Vishay | TC33X-2-104E | SMD-3 | Cross-reference equivalent |
| Murata | PVG5A104C01R00 | SMD-4 | 100kOhm, similar size |
| BI Technologies | 3362P-1-104LF | SMD-3 | Open-frame, 100kOhm |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






