Opens in a new tab

Home » Integrated Circuits ICs » TCAN1042DRQ1

TCAN1042DRQ1

Automotive CAN FD transceiver, 5Mbps, AEC-Q100, SOIC-8

11578

Effective Inventory

Image for reference only

Manufacturer Part:

TCAN1042DRQ1

Package:

SOIC-8

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TCAN1042DRQ1 from TI is an AEC-Q100 Grade 1 qualified CAN FD transceiver supporting data rates up to 5 Mbps. A VIO pin enables direct connection to 1.8V, 2.5V, 3.3V, or 5V microcontrollers without level translation.

Key Specifications

Function Automotive CAN FD transceiver
Data Rate Up to 5 Mbps (CAN FD)
Supply Voltage 4.5V to 5.5V
VIO 1.8V to 5.5V logic level I/O
ESD Protection ±8 kV HBM on bus
Bus Fault Protection ±58V on CANH/CANL
AEC-Q100 Grade 1 (-40 to +125°C)
Package SOIC-8 (3.9×4.9mm)

Working Principle

Differential driver transmits CANH/CANL with dominant/recessive states. VIO pin sets the logic level for TXD/RXD pins, matching the MCU I/O voltage. Receiver converts bus differential voltage to single-ended logic. Standby mode reduces current to <15 µA with remote wake via bus dominant. ±58V bus fault protection survives ISO 11898-2 worst-case shorts.

Applications

  • Automotive CAN FD gateway
  • ADAS sensor bus
  • Vehicle body control
  • Industrial CAN FD
Product Introduction: TCAN1042DRQ1 Product Introduction

The TCAN1042DRQ1 from TI is an AEC-Q100 Grade 1 qualified CAN FD transceiver supporting data rates up to 5 Mbps. A VIO pin enables direct connection to 1.8V, 2.5V, 3.3V, or 5V microcontrollers without level translation.

Working Principle: TCAN1042DRQ1 Working Principle

Differential driver transmits CANH/CANL with dominant/recessive states. VIO pin sets the logic level for TXD/RXD pins, matching the MCU I/O voltage. Receiver converts bus differential voltage to single-ended logic. Standby mode reduces current to <15 µA with remote wake via bus dominant. ±58V bus fault protection survives ISO 11898-2 worst-case shorts.

Pin Description: TCAN1042DRQ1 Pin Definition and Functions
Pin Name Description
1 TXD Transmit data input
2 GND Ground
3 VCC 5V supply
4 RXD Receive data output
5 VIO I/O level reference
6 CANH CAN high
7 CANL CAN low
8 STB Standby enable
Application Scenarios: In which products and applications is TCAN1042DRQ1 used
  • Automotive CAN FD gateway
  • ADAS sensor bus
  • Vehicle body control
  • Industrial CAN FD
Alternative Models: What chips are recommended as replacements for TCAN1042DRQ1
Model Manufacturer Key Difference
TJA1463 NXP Similar CAN FD

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1