Opens in a new tab

TCM1-63AX+

Mini-Circuits 1:1 RF transformer, 10MHz~6GHz, center tap, 1.3dB IL, DB1627 package

4358

Effective Inventory

Image for reference only

Manufacturer Part:

TCM1-63AX+

Package:

Case Style DB1627 (4.06mm x 3.81mm x 4.06mm)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TCM1-63AX+ from Mini-Circuits is a wideband 1:1 RF transformer with center tap in a compact surface-mount package. Covering 10MHz to 6000MHz with 1.3dB typical insertion loss, it provides excellent amplitude and phase balance for balun conversion, ADC driver, and differential amplifier interface applications across all cellular and wireless bands.

Key Specifications

Frequency Range 10MHz ~ 6000MHz
Impedance Ratio 1:1 (50 ohm:50 ohm, with center tap)
Insertion Loss 1.3dB typical (mid-band)
Amplitude Imbalance 0.5dB max
Phase Imbalance 8 degrees max
Return Loss 14.78dB @ 10MHz, 16.90dB @ 1000MHz
RF Power 0.2W max
DC Current (CT) 30mA max
Operating Temperature -40C ~ +85C
Package Case Style DB1627 (4.06mm x 3.81mm x 4.06mm)

Features

  • Ultra-wideband 10MHz to 6000MHz covers all cellular and wireless standards
  • Center tap for DC bias injection or DC return in push-pull circuits
  • 1.3dB typical insertion loss with flat frequency response
  • Excellent amplitude balance (0.5dB) and phase balance (8 degrees)
  • Washable surface-mount package for automated assembly

Applications

  • Balanced-unbalanced (balun) conversion for mixers and ADCs
  • Differential ADC driver input interface
  • Broadband push-pull amplifier coupling
  • LTE/5G, WiFi, WiMAX front-end modules
  • Mixer LO and IF port matching
Product Introduction: TCM1-63AX+ Product Introduction

The TCM1-63AX+ from Mini-Circuits is a wideband surface-mount RF transformer with a 1:1 impedance ratio (50 ohm:50 ohm) and center tap. It operates over an exceptionally wide frequency range from 10MHz to 6000MHz, covering all major cellular (LTE, 5G sub-6), WiFi (2.4/5/6GHz), and wireless connectivity standards in a single component. The typical insertion loss of 1.3dB in the mid-band is remarkably flat across the operating range, simplifying system gain budgeting. The center tap enables DC bias injection for active mixers and amplifiers, or serves as a DC return in push-pull amplifier configurations. With amplitude imbalance of 0.5dB max and phase imbalance of 8 degrees max, the TCM1-63AX+ provides excellent signal balance for differential circuit interfaces. The compact DB1627 case style (4.06mm x 3.81mm) is compatible with automated pick-and-place assembly and is washable for post-solder cleaning.

Working Principle: TCM1-63AX+ Working Principle

The TCM1-63AX+ operates as a transmission-line transformer using tightly coupled bifilar windings on a ferrite core. When an unbalanced (single-ended) RF signal is applied to the primary winding, the magnetic coupling induces a balanced (differential) signal across the secondary winding with the specified impedance transformation. The center tap on the secondary provides a virtual ground for the differential signal, allowing DC bias to be injected without disturbing the RF signal path. The transmission line structure minimizes parasitic capacitance and leakage inductance, enabling operation up to 6000MHz. The 1:1 impedance ratio means the voltage is simply divided equally across the two secondary halves, producing two outputs of equal amplitude and opposite phase from the center tap reference.

Pin Description: TCM1-63AX+ Pin Definition and Functions
Pin Name Function
1 PRIMARY DOT Primary Side Dot (unbalanced input)
2 PRIMARY/GND Primary Side / Ground
3 SECONDARY DOT Secondary Side Dot (balanced +)
4 CT Center Tap
5 SECONDARY Secondary Side (balanced -)
6 GND Ground
Application Scenarios: In which products and applications is TCM1-63AX+ used
  • Balun conversion: Convert single-ended RF signals to differential for mixer RF/LO ports and ADC differential inputs
  • ADC driver interface: Provide the required differential drive to high-speed ADCs with center tap for common-mode bias
  • Push-pull amplifier: Couple differential output of push-pull MMIC amplifiers to single-ended 50-ohm systems
  • Cellular/WiFi front-end: Cover LTE, 5G sub-6, WiFi 6/6E bands (2.4/5/6GHz) with a single transformer
  • Mixer port matching: Transform impedance and provide balun function at mixer IF or LO ports with DC bias via center tap
Alternative Models: What chips are recommended as replacements for TCM1-63AX+
Model Brand Freq Range Ratio CT
TCM1-63A+ Mini-Circuits 10M~6GHz 1:1 Yes
TCM2-33WX+ Mini-Circuits 5M~3GHz 1:2 Yes
ETC1-1-13TR Mini-Circuits 5M~3GHz 1:1 No
BN43-2402 Amidon DC~200MHz 1:1 Custom
TCM1-452X+ Mini-Circuits 5M~4.5GHz 1:1 Yes

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1