Opens in a new tab

TDA2030A

18W class-AB audio amp, ±6-22V, 0.08% THD, SCP, TSD, Pentawatt-5

5000

Effective Inventory

Image for reference only

Manufacturer Part:

TDA2030A

Package:

Pentawatt-5 (PZFM5, 5-pin vertical mount, through-hole, tab=heatsink)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TDA2030A from STMicroelectronics is a monolithic class-AB audio power amplifier IC delivering 18W into 4Ω at ±16V supply, with very low harmonic distortion (0.08% THD), short-circuit protection, and thermal shutdown in a Pentawatt-5 package.

Key Specifications

Output Power 18W @ VS=±16V, RL=4Ω, d=0.5%
Supply Voltage Range ±6V to ±22V (dual) or 12V to 44V (single)
Quiescent Drain Current 50mA typical, 80mA max
Input Bias Current 0.2µA typical, 2µA max
Input Offset Voltage ±2mV typical, ±20mV max
Open Loop Voltage Gain 80dB typical @ 1kHz
Closed Loop Voltage Gain 26dB typical (adjustable)
Total Harmonic Distortion 0.08% typical @ 1kHz, 0.1-14W, RL=4Ω
Power Bandwidth 100kHz @ Po=15W, RL=4Ω
Slew Rate 8V/µs typical
Input Resistance 5MΩ typical (open loop)
Signal-to-Noise Ratio 106dB @ Po=15W, RL=4Ω
Supply Voltage Rejection 54dB @ 100Hz
Peak Output Current 3.5A (internally limited)
Thermal Shutdown 145°C junction temperature
RθJC (Junction-to-Case) 3°C/W max
Operating Temperature -40°C to +150°C (junction)
Package Pentawatt-5 (PZFM5, through-hole)

Features

  • 18W output power into 4Ω at ±16V
  • Very low harmonic and crossover distortion (0.08% THD)
  • High output current capability (3.5A peak)
  • Short-circuit protection with automatic power limiting
  • Thermal shutdown at 145°C junction
  • Wide supply voltage range: ±6V to ±22V
  • High input impedance: 5MΩ
  • Can be used as 35W driver with external complementary pair
  • Single or split supply operation

Applications

  • Hi-Fi audio amplifiers
  • Powered speakers and bookshelf systems
  • 35W driver with external transistor pair
  • Car audio systems
  • Guitar practice amplifiers
Product Introduction: TDA2030A Product Introduction

The TDA2030A from STMicroelectronics is a monolithic class-AB audio power amplifier in a Pentawatt-5 package, delivering 18W into a 4Ω load at ±16V supply with only 0.5% distortion, or 12W into 8Ω. At moderate power levels (0.1-14W), the THD drops to just 0.08% at 1kHz, making it suitable for hi-fi applications. The device features built-in short-circuit protection that automatically limits the dissipated power to keep the output transistors within their safe operating area, as well as conventional thermal shutdown at 145°C junction temperature. The 3.5A peak output current and 100kHz power bandwidth ensure excellent dynamic performance. When used as a driver with an external complementary transistor pair, the TDA2030A can deliver up to 35W output power. The A suffix denotes the improved version with VS max = 44V (vs 36V for the original TDA2030), providing greater reliability in unregulated supply applications. Note: ST has marked this product as obsolete/EOL, but it remains widely available from distributors.

Working Principle: TDA2030A Working Principle

The TDA2030A is a class-AB push-pull audio amplifier. The input signal is applied to the non-inverting input (pin 1), which feeds a differential input stage. The differential stage drives a voltage amplifier stage, which in turn drives the complementary push-pull output stage (NPN and PNP power transistors in series between V+ and V-). In class-AB operation, a small bias current flows through both output transistors at idle, eliminating the crossover distortion that occurs in pure class-B designs when the signal transitions from one transistor to the other. The closed-loop voltage gain is set by external resistors: the feedback resistor from the output (pin 4) to the inverting input (pin 2) and the resistor from pin 2 to ground determine the gain. The typical configuration provides 26dB (×20) gain. The 8V/µs slew rate limits the maximum rate of output voltage change, which affects high-frequency large-signal performance. The short-circuit protection monitors the output current and voltage across the output transistors; when the safe operating area (SOA) is exceeded, the drive to the output stage is reduced, limiting dissipation. The thermal shutdown uses a temperature sensor on the die; when junction temperature reaches 145°C, the output stage is disabled until the device cools.

Pin Description: TDA2030A Pin Definition and Functions
Pin Name Type Description
1 Non-inverting Input Input Signal input (high impedance, 5MΩ)
2 Inverting Input Input Feedback input (sets gain with external resistors)
3 GND / V- Power Negative supply or ground (single supply)
4 Output Output Amplified audio output (3.5A peak)
5 V+ Power Positive supply (up to +22V)

TDA2030A uses the Pentawatt-5 (TO-220-5) package with audio power amplifier pinout: Pin 1 = Non-inverting Input (+), Pin 2 = Inverting Input (-), Pin 3 = VEE (-V or GND), Pin 4 = Output (to speaker), Pin 5 = VCC (+V). The tab is electrically connected to Pin 3 (VEE/GND). The split-supply operation (±6V to ±18V) allows direct capacitor-less coupling to the speaker. In single-supply configuration, a 2200µF output coupling capacitor is required. The device provides 18W into 4Ω at ±14V. Input impedance is typically 5MΩ (non-inverting). The SOA protection includes output short-circuit to ground and across supply rails, thermal shutdown at 145°C, and overvoltage clamping.

Application Scenarios: In which products and applications is TDA2030A used
  • 18W Hi-Fi Amp: ±16V split supply, 4Ω speaker; gain set by feedback R network; output coupling capacitor not needed with split supply
  • Single-Supply Amp: V+=24V, GND=0V; output biased at V+/2 via voltage divider; 2200µF coupling capacitor to speaker
  • 35W Driver: TDA2030A drives external BDV64/BDV65 complementary pair; base drive from pin 4; higher current and power output
  • Car Audio: 12V single supply; ~5W into 4Ω; bridge two TDA2030A in BTL for ~15W into 4Ω from 12V
  • Active Speaker: PC speaker or practice amp; ±12V supply, 8Ω; compact heatsink required (RθJC = 3°C/W)
Alternative Models: What chips are recommended as replacements for TDA2030A
Model Manufacturer Key Difference Package Specs
TDA2030 ST Original 14W version with lower 18V max supply for less demanding audio applications PENTAWATT-5 14W/±18V
TDA2040 ST 22W higher-power version with ±20V supply for louder speaker driver applications PENTAWATT-5 22W/±20V
TDA2050 ST 32W highest-power version with ±25V supply for high-fidelity speaker amplification PENTAWATT-5 32W/±25V
LM1875T TI 25W audio power amplifier with 94dB PSRR and minimal external components in TO-220-5 TO-220-5 25W/±30V
TPA3116D2DAP TI Class-D 50W stereo audio amplifier with 92% efficiency for modern wireless speaker designs HTSSOP-32 50W/Class-D

TDA2030A is an 18W mono Class-AB audio power amplifier in PENTAWATT-5 (TO-220-5) package with ±18V maximum supply. The TDA2040 (22W) and TDA2050 (32W) scale output power in the same pinout. For modern Class-D efficiency, TPA3116D2 offers 50W stereo at 92% efficiency. The TDA2030A requires only 5 external components and includes thermal shutdown and short-circuit protection.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1