Opens in a new tab

Home » Integrated Circuits ICs, Sensors » TEMD5510FX01

TEMD5510FX01

PIN photodiode, 540nm peak, 430-610nm range, 7.5mm² area, AEC-Q101, SMD 5×4.2mm

5100

Effective Inventory

Image for reference only

Manufacturer Part:

TEMD5510FX01

Package:

SMD (5.0 x 4.2 x 1.1 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TEMD5510FX01 from Vishay is a PIN silicon photodiode optimized for visible light detection, with peak sensitivity at 540 nm and spectral range from 430 nm to 610 nm. AEC-Q101 qualified, it features 7.5 mm² active area, 2 nA dark current, and ±65° half-sensitivity angle in a surface-mount (5.0 x 4.2 mm) package.

Key Specifications

  • Type: PIN silicon photodiode (ambient light sensor)
  • Peak Wavelength: 540 nm
  • Spectral Range: 430 nm ~ 610 nm
  • Active Area: 7.5 mm²
  • Reverse Voltage: 16V max
  • Dark Current: 2 nA typical (VR=5V)
  • Light Current: 1.0 µA (Ev=100 lux, Illuminant A)
  • Open Circuit Voltage: 350 mV typ
  • Half-Sensitivity Angle: ±65°
  • Viewing Angle: 130°
  • Rise/Fall Time: 50 ns typical
  • Operating Temperature: -40°C ~ +100°C
  • Package: SMD (5.0 x 4.2 x 1.1 mm)
  • AEC-Q101: Qualified
  • MSL: 4 (72 hours floor life)

Features

  • Spectral response adapted to human eye (V(λ) approximated)
  • Near-infrared suppression filter integrated
  • Large 7.5 mm² active area for high sensitivity
  • AEC-Q101 qualified for automotive applications
  • Wide ±65° half-sensitivity angle
  • Low dark current for high signal-to-noise ratio
  • Surface-mount top-view package

Applications

  • Automotive ambient light sensing
  • Display backlight dimming control
  • Notebook and monitor brightness adjustment
  • Street lighting control
  • Consumer electronics light detection
Product Introduction: TEMD5510FX01 Product Introduction

The TEMD5510FX01 from Vishay is a PIN silicon photodiode specifically designed for ambient light detection with spectral sensitivity closely matching the human eye response. The integrated near-infrared suppression filter blocks wavelengths above 610 nm, preventing false readings from IR sources such as remote controls and sunlight IR components. The large 7.5 mm² active area provides high photosensitivity, generating 1.0 µA under 100 lux illumination (CIE Illuminant A). AEC-Q101 qualified, the device meets automotive reliability requirements for ambient light sensing in automatic headlight control and dashboard dimming applications. The surface-mount top-view package enables easy PCB integration.

Working Principle: TEMD5510FX01 Working Principle

The TEMD5510FX01 operates as a PIN photodiode in photoconductive mode. When photons with energy exceeding the silicon bandgap (1.12 eV, corresponding to wavelengths below ~1100 nm) strike the active area, electron-hole pairs are generated in the depletion region. Under reverse bias, these carriers are swept to the contacts by the electric field, producing a photocurrent proportional to the incident light intensity. The integrated IR suppression filter absorbs near-infrared radiation above 610 nm, shaping the spectral response to approximate the CIE photopic luminosity function V(λ). This ensures that the sensor output correlates with perceived brightness rather than total radiant power. The PIN structure with its intrinsic layer provides fast response (50 ns) and low capacitance, enabling operation in both DC and AC-coupled circuits.

Pin Description: TEMD5510FX01 Pin Definition and Functions
Pin Name Function
1 Anode Positive terminal (connect to ground in reverse-bias mode)
2 Cathode Negative terminal (connect to V+ through load resistor in reverse-bias mode)
Application Scenarios: In which products and applications is TEMD5510FX01 used

The TEMD5510FX01 is widely used in automotive applications for automatic headlight control, where the human-eye-matched spectral response ensures correct day/night detection. In notebook computers and monitors, it provides ambient light sensing for automatic display brightness adjustment, improving user comfort and extending battery life. For street lighting control, the device detects ambient light levels to switch lights on at dusk and off at dawn. The AEC-Q101 qualification makes it suitable for under-hood automotive applications where temperature cycling and vibration are present. The 7.5 mm² active area provides sufficient sensitivity for indoor ambient light measurement at typical office illumination levels (300-500 lux).

Alternative Models: What chips are recommended as replacements for TEMD5510FX01
Model Manufacturer Key Difference
TEMD6010FX01 Vishay Smaller package (2x4mm), lower sensitivity
VEMD5510FX01 Vishay Broader spectral range (420-620nm)
BPW21R Vishay Through-hole TO-5, 565nm peak

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1